Panasonic Hd Custom Home Theater Plasma Display Th 50vx100 Operating Instructions

SERIAL 
6789
1345
2
11
Connections
SERIAL Terminals connection
Notes:
Use the RS-232C straight cable to connect the computer 
to the Plasma Display.
The computer shown is for example purposes only.
Additional equipment and cables shown are not supplied 
with this set.
The SERIAL terminal conforms to the RS-232C interface 
specification, so that the Plasma Display can be controlled 
by a computer which is connected to this terminal.
The computer will require software which allows the 
sending and...

PC    ISLOT1SLOT2SLOT3
COMPONENT/RGB INAUDIORLPR/CR/R PB/CB/BY/G
HDMI
AV OUTHDMI
AV OUTHDMI
AV  O U THDMI
AV OUT
SLOT3
COMPONENT/RGB IN
AUDIORLPR/CR/RPB/CB/BY/G
AUDIO OUT 
Y 
,  P 
B,P R,
OUT  P
R
P B
Y 
L 
R
COMPONENT VIDEO OUT 
12
Connections
COMPONENT / RGB connection
Notes: Change the “COMPONENT/RGB-IN SELECT” setting in the “SET UP” menu to “COMPONENT”
(when COMPONENT signal connection) or “RGB” (when RGB signal connection). (se\
e page 39)
Additional equipment, cables and adapter plugs shown are...

HDMI
INPUT MENU
INPUT MENUOK
PC FULL 
English (UK)
Deutsch
Français Italiano
ENGLISH (US) Русский
OSD LANGUAGE
Español
13
Power 
IndicatorRemote Control 
Sensor
Power ON / OFF
Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the Plasma Display 
with the clamper. (see page 9) 
Connecting the plug to the Wall Outlet.
Note: 
When disconnecting the AC cord, be absolutely sure to 
disconnect the AC cord plug at the socket outlet first.
Press the Power switch on the Plasma...

COMPONENT/RGB-IN SELECT
EXTERNAL SCALER MODE
POWER SAVEOFF OFF
RGB
OSD POSITION UPPER LEFT SCREENSAVER
SIGNAL
OSD LANGUAGE
ENGLISH(
US )
HDMI
INPUT MENUENTER/■
MENUENTER/■INPUT
SET UP
POS. /SIZE
SOUND PICTURE
INPUTPress to select the input signal to be played back from the 
equipment which has been connected to the Plasma Display.
HDMI1
HDMI2
HDMI3
HDMI4
COMPONENT
PCINPUT
HDMI signal terminal in SLOT1
HDMI signal terminal in SLOT2
COMPONENT or RGB signal terminal in SLOT3
PC signal terminal in PC IN...

INPUT MENUENTER/■
15
Basic Controls
Remote control 
sensor
Main Unit
Main Power On / Off SwitchEnter / Aspect 
button 
(see page 18, 19)
When the menu screen is displayed:
“▲
” :   press to move the cursor up 
“▼” :   press to move the cursor 
down
 (see page 19)
INPUT button
(INPUT1, INPUT2, INPUT3 
and PC selection)
(see page 14)
Power Indicator
The Power Indicator will light.
• Power-OFF ...  Indicator not illuminated (The unit will still consume some power 
as long as the power cord is still...

COMPO.PC
FUNCTION
DISPLAY
PICTURE
POS.
/SIZE
INPUT
CH VIDEO
MENU
HDMI
OFF TIMEREXT.SCALER
0Õ
DISPLAY
MEM.
LOAD
16
Standby (ON / OFF) button
The Plasma Display must first be plugged 
into the wall outlet and turned on at the 
power switch (see page 13).
Press this button to turn the Plasma 
Display On, from Standby mode. Press 
it again to turn the Plasma Display Off to 
Standby mode.
Remote Control Transmitter
Basic Controls
POS. /SIZE button 
(see page 31) PICTURE button
 
(see page 21)
LIGHT button...

17
Basic Controls
SCROLLING BAR and TEST PATTERNS functions
Pressing  activates one of the following two functions. The function button setting can be configured by accessing 
“Function button assign” in the OPTIONS menu. (see page 42)
SCROLLING BAR TEST PATTERNS
EXT. SCALER function 
Each time you press , an external scaler is activated or deactivated. 
ONEXTERNAL SCALER MODE
OFF: Use the built-in scaler. 
ON: Use an external scaler. 
The setting is valid with the following signals.
1125 (1080) / 24p •...

HDMI
MENUENTER/■INPUT
18
ASPECT Controls
The Plasma Display will allow you to enjoy viewing the picture at its ma\
ximum size, including wide screen cinema format picture.
Note:
Be aware that if you put the display in a public place for commercial pu\
rposes or a public showing and 
then use the aspect mode select function to shrink or expand the picture\
, you may be violating the 
copyright under copyright law. It is prohibited to show or alter the copyrighted materials of other p\
eople 
for...

HDMI
DISPLAY
PICTURE
POS.
/SIZE
Press to 
return to the 
previous 
menu.
19
On-Screen Menu Displays
Various menus allow you to make settings for the picture, sound, and othe\
r functions so that you can enjoy watching 
Display best suited for you.
Remote Control Unit
1Display the menu screen.
SET UP
POS. /SIZE
SOUND
OPTIONS
PICTURE
STANDARD
ADVANCED SETTINGS MEMORY SAVE
MEMORY LOAD MEMORY EDIT
PICTURE MENU
250
5 NORMAL
PICTURE
NORMAL IZE
BRIGHTNESS
SHARPNESS
COLOR TEMP
COLOR MANAGEMENT
press
MENU  press...

SET UP
POS. /SIZE
SOUNDOPTIONS
PICTURESTANDARD
ADVANCED SETTINGS MEMORY SAVE
MEMORY LOAD MEMORY EDIT
PICTURE MENU
250
5
OFF
NORMAL
PICTURE
NORMAL IZE
BRIGHTNESS 6
COLOR
0
TINT
SHARPNESS
COLOR TEMP
COLOR MANAGEMENT
COMPONENT/RGB-IN SELECT
EXTERNAL SCALER MODE
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF OFF
OFF ON
OFF OFF
RGB
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH(
US )
SCREENSAVER
SIGNAL
DISPLAY SIZEH-POS
0 0 0
OFF
H-SIZE
AUTO SETUP
NORMAL IZE
V- P O S 0
V-SIZE
0
DOT...