Panasonic Hd Custom Home Theater Plasma Display Th 50vx100 Operating Instructions

TQBC2372-1
Model No.
Operating Instructions 
High Definition 
Custom Home Theater Plasma Display
TH-50VX100U
TH-65VX100U
English
Before connecting, operating or adjusting this product, please read thes\
e instructions completely.
Please keep this manual for future reference.
The illustration shown is an image. 

2
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service p\
ersonnel.The lightning flash with 
arrow-head within a triangle 
is in tend  ed to tell the user 
that parts inside the product 
are a risk of electric shock 
to per sons. The exclamation point within 
a triangle is intended to 
tell the user that important 
operating and servicing 
instructions are in the papers 
with the ap pli ance.
CAUTION
RISK OF...

3
Important Safety Instructions
  1) Read these instructions.
  2) Keep these instructions.
  3) Heed all warnings.
  4) Follow all instructions.
  5) Do not use this apparatus near water.
  6) Clean only with dry cloth.
  7) Do not block any ventilation openings. Install in accordance with the ma\
nufacturer’s instructions.
  8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9) Do not defeat the safety...

4
Table of Contents
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment 
from your new Plasma Display.
To obtain maximum benefit from your set, please read these Instructions before making any adjustments, 
and retain them for future reference.
Retain your purchase receipt as well, and record the model number and serial number of your set in the 
space provided on the rear cover of these instructions.
Important Safety Instructions...

5
This equipment has been tested and found to comply with the limits for a\
 Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmf\
ul interference in a 
residential installation. This equipment generates, uses and can radiate radio frequency energy an\
d, if not installed 
and used in accordance with the instructions, may cause harmful interfer\
ence to radio communications. However, 
there is no guarantee that...

6
Safety Precautions
This Plasma Display is for use only with the following optional accessor\
ies. Use with any other type of optional 
accessories may cause instability which could result in the possibility \
of injury.  
(All of the following accessories are manufactured by Panasonic Corpora\
tion.)
   CAUTION  
 When using the Plasma Display
Do not bring your hands, face or objects close to the 
ventilation holes of the Plasma Display.
•  
Top of the Plasma Display is usually very hot due to the...

7
Safety Precautions / Maintenance
WARNING 
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning 
cloth or a soft, lint-free cloth.
  •  
If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water \
or water in 
which neutral detergent has been diluted 100 times, and then wipe it eve\
nly with a dry cloth of the same type until 
the surface is dry.
  •   Do not scratch or hit the surface of the...

COMPO.PC
FUNCTIONDISPLAYPICTURE
POS.
/SIZE
INPUT
CH VIDEO
MENU
HDMI
OFF TIMEREXT.SCALER
0Õ
DISPLAY
MEM.
LOAD
“AA” size
CloseOpen
Hook
8
Accessories
Requires two AA batteries. 2.  Insert batteries - note correct polarity ( + and -).
  Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will\
 damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precautions:
1. Batteries should always be...

12
SERIAL
PC    IN
AUDIO
SLOT1SLOT2SLOT3
COMPONENT/RGB INAUDIORLPR/CR/R PB/CB/BY/G
1
2
1
2
1
2
9
Connections
– Cable fixing band
   Secure any excess cables with band as required.
Note:
Make sure that the AC 
cord is locked on both 
the left and right sides. Push until 
the hook 
clicks.
1.  
Keep the 
knob pressed.
Close
Open
1   Plug the AC cord into 
the display unit.
     Plug the AC cord until it 
clicks.
2  Fix the AC cord with 
the clamper which is 
attached to the unit.
  Note: 
  
One fixing...

AUDIO
PC IN 
10
PC Input Terminals connection
Notes:Due to space limitations, occasionally you may have trouble connecting M\
ini D-sub 15P cable with ferrite core to PC 
input Terminal.
With regard to the typical PC input signals that are described in the ap\
plicable input signals list (see page 50), 
adjustment values such as for the standard picture positions and sizes h\
ave already been stored in this unit. You can 
add up to eight PC input signal types that are not included in the list.\
Computer...