Panasonic Hc W850 Owners Manual

- 151 -
Playing back on a TV
You can play back the scenes and still pictures recorded with or stored in this unit on a TV.
≥The following scenes can be played back:
jScenes recorded in AVCHD
j Scenes recorded in MP4/iFrame [720]
j Scenes saved in MP4 (High Quality) or MP4 (Low Quality)
1Press Wi-Fi button and touch [DLNA Play]. ≥If you touch [Change AP], you can switch the wireless access point to another one that has been 
registered to this unit.
≥ If you touch [CANCEL], the Wi-Fi connection is...

- 152 -
By setting up a Wi-Fi communication between this unit and a PC, you can copy scenes and still 
pictures recorded with this unit to the PC.
APC
Preparations before using [Copy]
1Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Check if the PC and the wireless access point are connected via Wi-Fi.
≥You can also use a LAN cable to connect the PC and the wireless access point.3 Set up a Wi-Fi connection between this unit and the wireless access point.≥[WPS Connection] ( l165...

- 153 -
To copy scenes and still pictures by setting up a Wi-Fi connection between this unit and the PC, 
complete the following preparations:jTurn on the PC
j Create a shared folder (destination folder)
*1
*1 The name of the folder must consist of 15 or less alphanumeric characters.
∫ When using HD Writer AE 5.1
1 Install HD Writer AE 5.1.≥For information on the operating environment and installation, refer to “Operating environment” 
(l 184 ) and “Installation” (l 187).
2Using HD Writer AE 5.1, create...

- 154 -
Copying to a PC
≥Create a shared folder (destination folder) on the PC. ( l153 )
1Press Wi-Fi button and touch [Copy]. 
2Touch the PC to be connected.≥To search for PCs again, touch [Refresh].
(When the PC you want to connect to is not displayed)
Touch [Manual Setting].
3(When [Manual Setting] is touched)Enter the computer name of the PC (NetBIOS name for Mac computers).≥Enter the computer name of your PC (NetBIOS name for Mac computers).
(A maximum of 15 characters can be entered.)
≥ When the...

- 155 -
≥Copying can be performed even when the battery is used for power, but we recommend that the 
AC adaptor be used.
≥ Once scenes or still pictures are copied to a PC, the original scenes or still pictures cannot be 
copied to any PCs. 
≥ If the total length of the scenes recorded on the same date on the SD card exceeds 
approximately 8 hours, the scenes will not be copied.
≥ If the copy source contains scenes or still pictures recorded on other devices, copying may be 
canceled.
≥ Depending on...

- 156 -
You can broadcast motion pictures of this unit live by setting up a link between the “LUMIX CLUB” 
and USTREAM.
AYou can also broadcast motion pictures live by connecting this unit and a smartphone that 
supports tethering.
Wi-Fi
[Live Cast]
≥If [CLOCK SET] (l22) is not set correctly, [Live Cast] cannot be used.≥ Check your contract details carefully, as smartphone and internet contract details may 
result in high communication charges being incurred, or a limit placed on 
communication traffic....

- 157 -
Preparations before using [Live Cast]
1(When connecting to a wireless access point)Check if the wireless access point is compatible with IEEE802.11b/g/n.
(For tethering connection)
Check if your smartphone is compatible with the tethering function.≥For information on how to set up the tethering function, refer to the operating instructions for 
your smartphone.
2 Acquire a USTREAM ID/Password/App.≥Acquire a USTREAM ID/Password/App using a smartphone or a PC.
≥ Operation cannot be guaranteed on...

- 158 -
Broadcasting live
Press Wi-Fi button and touch [Live Cast]. ≥If a “LUMIX CLUB” Login ID and Password has not been registered to this unit yet, enter them 
according to the screen.
≥ If you touch [Change AP], you can switch the wireless access point to another one that has been 
registered to this unit.
≥ When the connection is made correctly, the screen of this unit switches to the Live Cast Mode.
∫ To send e-mails
You can send e-mails containing such information as the USTREAM channel name or...

- 159 -
∫
About the screen indications in the Live Cast Mode
≥Recording is performed in Intelligent Auto Mode.
≥ In Live Cast Mode, [REC FORMAT] is set to [AVCHD], and [REC MODE] ( l161 ) is set to [PH]/
[HA]/[HG]/[HE].
≥ If this unit is on the e-mail sender block list of de stination devices or if their firewall setting is 
enabled, the Wi-Fi function may not work correctly  when you send an e-mail. If this occurs, check 
the network settings.
≥ When the live broadcast cannot be watched on a USTREAM...

- 160 -
∫
To configure the e-mail delivery settings
You can make the delivery setting of a broadcast notification e-mail and the setting for the 
scheduled time and date of the broadcast indicated in the e-mail.
1 Touch [E-MAIL SETUP].
2 Touch [ON] or [OFF].
3
(When [ON] is selected)To set the scheduled broadcast date.
∫ To set the image quality
1 Touch [IMAGE QUALITY].
2 Touch the desired image quality.
≥Frame rate in parentheses are when recorded in simultaneously.
≥ Depending on the line status of the...