Panasonic Hc V500 Owners Manual

111VQT3W31
1Connect the AC adaptor (supplied with DVD burner) to the DVD 
burner.
≥You cannot supply power to the DVD burner from this unit.
2Connect this unit to the AC adaptor and change the mode to  .
3Connect this unit to the DVD burner with the USB Connection Cable 
(supplied with DVD burner).
A USB Connection Cable (supplied with DVD burner)
B DVD burner (optional)
≥ Insert the plugs as far as they will go.
4Insert the disc in the DVD burner.
≥Insert the DVD disc with the recording side down when...

112VQT3W31
Copying to discs
≥You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a 
DVD-RAM.)
≥
You cannot copy motion pictures together with still pictures or motion pictures in a different 
picture quality (AVCHD picture quality and conventional normal picture quality) to the same disc.
≥ iFrame and MP4 scenes cannot be copied to disc. Copy to PC to make a backup. ( l120)
≥
When copying a scene in the built-in memory to a disc that includes a scene that was relay-...

11 3VQT3W31
Before you delete the data on the media after copying is complete, be sure to play 
back the discs to check that they have been copied to correctly. (l11 4)
Important Notice≥When connecting an optional DVD burner and this unit for copying a disc, do not 
insert a disc with recorded motion pictures in high definition picture quality into 
devices that do not support the AVCHD format. In some cases the disc may get 
stuck in the device. The disc will not play back on devices that do not support...

114VQT3W31
≥The disc that was copied to can be played  back by connecting this unit and a DVD 
burner.
≥ Do not turn off this unit or the DVD burner  or disconnect the USB Connection Cable while 
copying. Also, do not shake this unit or the DVD burner.
≥ It is impossible to stop copying halfway.
≥ The order in which the scenes were copied cannot be changed.
≥ Data that has been recorded on another device may not be copied.
≥ When 2 or more discs are necessary for copying, the last scene copied to a disc...

11 5VQT3W31
Managing the copied disc
≥Connect this unit to the DVD burner and then touch [PLAY DISC]. ( l111 )
∫ Formatting discs
This is for initializing DVD-RAM, DVD-RW and +RW discs.
Please be aware that if a disc is formatted, then all the data recorded on the disc will 
be erased. Back up important data on a PC etc.
≥When formatting is complete, touch [EXIT] to exit the message screen.
≥Connect this unit and the DVD burner to format discs. 
You may no longer be able to use the discs if you format...

116VQT3W31
∫Check before dubbing
Check the equipment used for dubbing.
* Some equipment may not be compatible with high-definition (AVCHD) picture quality. In 
such a case, connect with the AV multi cable and dub with standard picture quality. (l 11 9 )
≥ For the positions of the SD card slot, USB terminal, or terminal for connecting the AV multi 
cable, refer to the operating instructions of the equipment used.
≥ The iFrame and MP4 scenes cannot be dubbed by inserting the SD cards or by connecting 
with...

11 7VQT3W31
∫To dub using equipment with an SD card slot
You can dub by directly inserting an SD card.
≥
To copy scenes or still pictures from the built-
in memory to an SD card, see page 108.
∫ To dub using equipment with a USB terminal
You can dub by connecting a USB cable.
≥Use the AC adaptor to free you from worrying about the battery running down.
≥ Turn on the unit (This function is available in all modes).
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
1Connect the unit to the...

118VQT3W31
2Touch [RECORDER] on the screen of this unit.≥When you select an option other than [RECORDER], reconnect the USB cable.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen 
to turn the LCD monitor on.
3
Touch the media you wish to dub.
≥When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen 
to turn the LCD monitor on.
4Dubbing through operations on the Bl u-ray disc recorder or high-
definition (AVCHD) compatible DVD...

11 9VQT3W31
∫Dubbing using equipment without an SD card slot or a USB terminal, 
or using a video device
You can dub by connecting an AV multi cable.
≥Images are dubbed in standard quality.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Change the mode to  .
1Connect this unit to a video device and start playback on this unit.
2Start recording on the connected device.≥To stop recording (dubbing), stop playback on this unit after stopping recording on the 
recorder.
≥If...

120VQT3W31
HD Writer AE 4.0You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs, 
DVD discs or SD cards using HD Writer AE 4.0, the software installed in the supplied CD-ROM.
Refer to the operating instructions of HD Writer AE 4.0 (PDF file) for details on how to use it.
∫Smart Wizard
The Smart Wizard Screen is automatically displayed when you connect this unit to a PC with 
HD Writer AE 4.0 installed. ( l128)
Copy to PC:
You can copy motion/still picture data...