Panasonic Hc V380 Hc V580 Owners Manual

21(ENG) SQT1139
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
1Open the LCD monitor, and set 
this unit to Motion Picture 
Recording Mode. (l17)
2Press the recording start/stop 
button to start recording.
3Press the recording start/stop 
button again to pause 
recording.
≥Recording can also be started/stopped by touching the recording  button icon.
ModeEffect
*1
*2Intelligent Auto You can switch the mode to the Intelligent Auto Mode, 
which optimizes settings to the...

22SQT1139 (ENG)
1Open the LCD monitor, and set this 
unit to Still Picture Recording Mode. 
(l 17)
2Press the   button halfway. (For 
Auto Focus only)
3Press the   button fully.
Using the Sub Camera and the Main Camera, you can record two 
images simultaneously. (Twin Camera)
Use the Sub Camera to enjoy recording yourself, a family member  
next to you or scenery different from that seen from the Main 
Camera.
B Sub Window
≥ The image of the Sub Camera is displayed on the Sub Window.
Basic
Recording...

23(ENG) SQT1139
1Rotate the Sub Camera.≥When you rotate the Sub camera from a position in the 
range  C (0e to approximately 30 e) to a position in the 
range  D (approximately 30 e to 270 e), the Sub Window is 
displayed on the LCD monitor.
≥ If the Sub Window does not appear, touch   to 
display it.
≥ When the Sub Camera is in use, you cannot start up the 
Wireless Twin Camera function with   (startup icon 
for Wireless Twin Camera/disconnect icon for Wireless 
Twin/Multi-Camera).
2Start...

24SQT1139 (ENG)
1Set this unit to Playback Mode (l17).
2Touch the play mode select icon  A  (l 19).≥You can also set by touching  , selecting [VIDEO 
SETUP] or [PICT. SETUP]  # [MEDIA, VIDEO/
PICTURE]. ( l26)
3Select the still picture  C or the recording 
format of the motion picture  D you wish to 
play back.
≥ Touch [Enter].
≥ If you touch  , scenes recorded as Backup for Twin 
Camera will be displayed. The recording mode icon 
( ) will be displayed on the thumbnail screen, and each thumbnai l will be...

25(ENG) SQT1139
≥The following icons are displayed on thumbnails when [ALL AVCHD ] or [1080/60i] is touched:
≥ The following icons are displayed on thumbnails when [ALL MP4/i Frame] is touched:
≥  is displayed on the thumbnails of MP4 [1080/50M] scenes when [ 1080/60p] in [MP4/iFrame] 
is touched.
5Touch the scene or the still picture to be played back.≥ To display the next (previous) page:
jSlide the thumbnail display upward (downward) while touching it .
j Switch the Touch Menu, and then touch   (up) /...

26SQT1139 (ENG)
≥Touch   (left side)/   (right side) of   on the Touch Menu to disp lay  . (l19)
1To u c h   .
2Touch the top menu  A.
3Touch the submenu B.
≥ Next (previous) page is displayed by touching 
/.
4Touch the desired item to enter the 
setting.
5Touch [EXIT] to exit the menu 
setting.
∫About   guide display
After touching  , touching the submenus 
and items will cause function descriptions and 
settings confirmation messages to appear.
≥After the messages have been displayed, the 
guide...

27(ENG) SQT1139
This unit offers the following Wi-Fi functions when used in combination with another Wi-Fi 
compatible device.
Before using any of these Wi-Fi functions, check the settings o f your device and get it ready for use.
This Basic Owner’s Manual describes the procedure for using [Li nk to Cell] to provide a Wi-Fi 
connection example.
∫ This unit is WPS-compatible
WPS (Wi-Fi Protected Setup™) is a function that allows you to e asily set up a connection with a 
wireless LAN device and make...

28SQT1139 (ENG)
∫Before using [Link to Cell]
Install the “Image App”
* The supported OS version are current as of November 2015 and s ubject to change.
≥ Use the latest version.
≥ Refer to [Help] in the “Image App” menu about how to operate.
≥ The service may not be able to be used properly depending on th e type of smartphone being 
used. For information on the “Image App”, check the support web site below.
http://panasonic.jp/support/global/cs/e_cam
(This Site is English only.)
≥ When downloading the...

29(ENG) SQT1139
Preparations before using [Link to Cell]
Install the “Image App”. (l28)
Setting up a direct connection between this unit and the smartp hone when 
[Direct Connection Password] is set to [OFF] ( l30)
≥The default setting for [Direct Connection Password] is [OFF].
1 Check if the wireless access point is compatible with IEEE802. 11b/g/n.
2 Set up a Wi-Fi connection between this unit and the wireless a ccess point.
≥For information on how to connect this unit and a wireless acce ss point,...

30SQT1139 (ENG)
Using [Link to Cell] with a direct connection
5When the Wi-Fi connection is complete, press the home button on the 
smartphone and start up the smartphone application “Image App”.  
≥Transmission speed may decrease, or may not be usable depending on the environment it is used in.≥For details on how to set up a connection with [Direct Connecti on Password] set to [ON], refer to 
the Owner’s Manual (PDF format).
≥If you cannot connect this unit and the smartphone, refer to th e following:
j...