Panasonic Hc V380 Hc V580 Owners Manual

11(ENG) SQT1139
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of Nov. 2015. These may be subject to change.
(For U.S.A. only)
If accessories are lost, customers can visit us at http://shop. panasonic.com/support
 
for further information about obtaining replacement parts.
Accessories
Battery pack
VW-VBT190
AC adaptor
VSK0815F
DC cable
K2GHYYS00002
USB cable
K2KYYYY00236
HDMI mini cable
K1HY19YY0021...

12SQT1139 (ENG)
∫About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBT190/VW-VBT 380.
≥ The unit has a function for distinguishing batteries which can  be used safely. The 
dedicated battery (VW-VBT190/VW-VBT380) supports this function.  The only batteries 
suitable for use with this unit are genuine Panasonic products  and batteries manufactured 
by other companies and certified by Panasonic. Panasonic cannot  in any way guarantee 
the quality, performance...

13(ENG) SQT1139
Charging the battery
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always 
“live” as long as the AC adaptor is connected to an electrical  outlet.
Important:
≥ Do not use the AC adaptor/DC cable with any other equipment as  it is designed only for 
this unit. Also, do not use the AC adaptor/DC cable from other  equipment with this unit.
≥ The battery will not be charged if the unit is turned on.
≥ It is recommended to charge the battery in a...

14SQT1139 (ENG)
≥Do not leave the battery(ies) in a car exposed to direct sunlig ht for a long period of time with 
doors and windows closed.
Charging and recording time
∫ Charging/Recording time
≥The indicated charging time is for when the battery has been di scharged completely. 
Charging time and recordable time vary depending on the usage c onditions such as high/
low temperature.
≥ Temperature: 25 oC (77  oF)/humidity: 60%RH
≥ Charging times in parentheses are when charging from the USB te rminal.
≥...

15(ENG) SQT1139
≥If there is less than 3 minutes remaining, then   will become re d. If the battery discharges, 
then   will flash. Recharge the battery or replace it with a ful ly charged battery.
The unit can record still pictures or motion pictures to an SD  card. To record to an SD card, read the 
following.
Cards that you can use with this unit
∫ About the Speed Class ratings for recording motion pictures
Depending on [REC MODE] and [REC FORMAT], the required card dif fers.
Use a card that meets the...

16SQT1139 (ENG)
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment, for the first 
time on this unit, format the SD card. ( l26) When the SD card is formatted, all of the recorded data 
is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access lamp has gone off.
You can turn the unit on and off using the power button or by o pening and closing the LCD monitor.
Open the LCD monitor and press the power button...

17(ENG) SQT1139
You can switch this unit between Recording Mode (Motion Picture Recording Mode/Still Picture 
Recording Mode) and Playback Mode by pressing the recording/playback button.
If you touch the recording mode switching icon in Recording Mod e, this unit can be switched 
between Motion Picture Recording Mode and Still Picture Recordi ng Mode.
Switching this unit between Recording Mode and 
Playback Mode
Switching this unit between Motion Picture Recording 
Mode and Still Picture Recording Mode...

18SQT1139 (ENG)
≥If the recording start/stop button is pressed in Still Picture  Recording Mode or Playback Mode, 
this unit will be switched to Motion Picture Recording Mode. During motion picture/still picture 
playback or in other conditions, even if the recording start/st op button is pressed, the recording 
mode may not be switched.
You can operate by directly touching the LCD monitor (touch scr een) with your finger.
∫Touch
Touch and release the touch screen to select icon or picture.
≥Touch the...

19(ENG) SQT1139
About the Touch Menu
∫To display the Touch Menu
The clock is not set at the time of purchase. Make sure to set  the clock.
≥ When you turn on this unit, the message “Set home region and da te/time.” may be 
displayed. Select [YES], and follow the steps below to make the se settings:
j Step 2 of “Setting your home region for the first time”
j Steps 2–3 of “Setting date and time”
1Select the menu. ( l26)
2Touch the date or time to be set, then set the desired value us ing /.ADisplaying the...

20SQT1139 (ENG)
You can set your home region in [SET WORLD TIME].
1Select the menu. (l26)
≥A message will be displayed. Touch [ENTER].
2Touch  /  to select your home 
region and touch [ENTER].
≥When the clock is not set, the current time is 
displayed as “--:----”.
≥For information on how to change your home region or set the re gion of your travel destination, 
refer to the Owner’s Manual (PDF format).
1Touch the Recording Mode button icon.
2Touch the desired Recording Mode button icon.
Preparation...