Panasonic Hc V270 Owners Manual

- 151 -
If the Wi-Fi connection cannot be established
≥Please refer to the operating instruction of the device in use  for details about the setting of the 
wireless access point or smartphone.
ProblemCheck points
It cannot connect to the 
wireless access point.
The wireless access point 
is not detected.
(General)
≥ Turn on the wireless access point.
≥ Approach the wireless access point and reconnect.
≥ If it takes time to complete t he connection, the Wi-Fi 
connection will be aborted.
Reset the...

- 152 -
The Wi-Fi connection is 
not possible between this 
unit and a smartphone.(Wireless Access Point Connection)
≥Make sure the smartphone is properly connected to the 
wireless access point by checking the Wi-Fi settings of the 
smartphone.
≥ Make sure this unit and the smartphone are connected to the 
same wireless access point.
≥ Make sure the wireless access point is registered in this unit.  
( l 153 )
(Direct Connection)
≥ Make sure the smartphone is properly connected to this unit 
by checking...

- 153 -
Configure various settings necessary to use the Wi-Fi function.
When connected to Wi-Fi, the settings cannot be changed.
1Press Wi-Fi button and touch [Wi-Fi Setup]. 
2Touch desired menu item.
You can add or delete wireless access points, or rearrange the display order of wireless access 
points.
≥ Up to 3 wireless access points can be set.
≥ Please refer to page  145 for details about [Wireless Settings].
To add a wireless access point
1Touch the part where no wireless access points 
are...

- 154 -
This item allows you to use NFC to turn on this unit, establish a remote connection, and configure 
the home monitoring settings.
Please refer to page  128.
If you set [ON], the LCD monitor turns off when remotely operat ing this unit with a smartphone (in 
Motion Picture Recording Mode or Still Picture Recording Mode)  so that power consumption is 
reduced.
≥ When the LCD monitor is turned off, you can display the screen  by touching it.
≥ If the Wi-Fi connection is turned off, this unit will...

- 155 -
You can change the Wi-Fi setting back to the default condition.
≥The “LUMIX CLUB” Login ID and Wi-Fi Password are also deleted.
You can view and change this unit’s Device name (SSID), which i s used for operating this unit as a 
wireless access point.
1 Touch [INPUT], and enter the desired Device name (SSID).≥Input up to 20 characters are recommended. All the characters c annot be confirmed when 
displaying the Device names on this unit if a long Device name  is used. (l148)
≥ For details on how...

- 156 -
You can test the connection between this unit and the wireless access point. The following 
connections can be verified: jConnection to the wireless access point
j Connection to “LUMIX CLUB”
j Connection to USTREAM
j Connection to the home monitor server
1 Touch [NEXT].≥The connection test starts.2 Check the connection test result, and touch [EXIT].≥If the connection is successful, “ ±” is displayed. If the connection is not successful, “ t” is 
displayed.
≥ To test the connection to “LUMIX CLUB”...

- 157 -
Acquire a “LUMIX CLUB” Login ID (free).
You can upload the scenes and still pictures recorded with this unit to WEB service with [Link to 
Cell] or use the [Live Cast] function if you register to “LUMIX  CLUB”.
≥ You can set the same “LUMIX CLUB” Login ID for this unit and a  smartphone.
When Login ID is acquired over the smartphone (“Image App”) onl y, it is possible to register the 
same Login ID to this unit using the “Image App”. (l 158)
When different Login IDs are acq uired for this unit...

- 158 -
∫
Register the Login ID of the smartphone (“Image App”) into this  unit
It is convenient to match the Login IDs for this unit and the smartphone (“Image App”) when using 
the Wi-Fi function utilizing the “LUMIX CLUB”.
1 Connect this unit to the smartphone.
2 From the “Image App” menu, set the common Login ID.
∫Check the “LUMIX CLUB” terms of use
Check the details if the terms of use have been updated.1 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. 
2 Touch [LUMIX CLUB].
3 Touch [Terms...

- 159 -
HD Writer LE 3.0
You can copy the motion/still picture data to the HDD of PCs or
 write to media like Blu-ray discs, 
DVD discs or SD cards using HD Writer LE 3.0.
≥ Refer to the operating instructions of HD Writer LE 3.0 (PDF fil e) for details on how to use it. 
( l 169 )
∫Smart Wizard
The Smart Wizard Screen is automatically displayed when you con nect this unit to a PC with 
HD Writer LE 3.0 installed. ( l166 )
Copy to PC:
You can copy motion/still picture data to the HDD of PCs.
Copy to...

- 160 -
≥It is possible to play back still pictures on a PC using a imag e viewer standard to Windows or 
commercially available image browsing software, and copy still  pictures to a PC using Windows 
Explorer.
≥ Please refer to page  170 for details about using a Mac.
≥It is impossible to write data to this unit from a PC.
≥ Motion pictures that have been recorded on another device canno t be written to the 
HD Writer LE 3.0.
≥ When motion picture data is written to and read from the SD car d, correct...