Panasonic Hc V270 Owners Manual

- 121 -
Using [Baby Monitor]
1Press Wi-Fi button on this unit and touch [Baby Monitor]. ≥The SSID of the wireless access  point to which this unit is connected is displayed.
2Connect the smartphone to a wireless access point.≥To connect it, select the SSID of the wireless access point dis played on the screen of this unit.
3Start up the smartphone application “Image App”.≥When this unit is connected to the Internet via the wireless ac cess point, the notification function, 
which sends notifications from...

- 122 -
Touch [Setup] on the screen of this unit, and select the item you want to set.
∫[Notification Setup]
This sets whether to send a notification to the smartphone when a sound is detected.
∫[Notification Test]
This tests if a notification can be sent to the smartphone when  a sound is detected.
∫[Remote Voice Level]
This sets the voice message volume.
∫[Sound Detection Sensitivity]
This sets the sound detection sensitivity.
Changing [Baby Monitor] settings
[ON]/[OFF]
(Volume high)/ (Volume low)...

- 123 -
You can confirm the recording screen of this unit from outside using a smartphone.
Preparations before using [Home Cam]
1Check if the wireless access point is compatible with IEEE802.1 1b/g/n.
2 Install the smartphone application “Image App” on your smartpho ne. (l141)
3 Check if the smartphone is an Android (NFC-compatible), Android  (non-NFC-
compatible), or iOS device.
≥ If the smartphone is NFC-compatible, the NFC mark is displayed when you start up “Image App”.4 Set up a Wi-Fi connection...

- 124 -
Using [Home Cam]
≥Perform the home monitoring operation on the smartphone. ( l127 )
≥ When the firewall is turned on, the Wi-Fi function may not work  correctly. If this occurs, check the 
network settings.
∫ If the device is Android (NFC-compatible)
≥Set the NFC function of the smartphone to on.
1Turn off the Wi-Fi setting of the smartphone.
2Start up the smartphone application “Image App”.≥When a Wi-Fi connection guidance screen is displayed, select [N O].
3Enable the home monitoring setting...

- 125 -
6Enter the Device ID and Password displayed on the screen of this unit into 
the smartphone.
≥ When the entry is complete, select [OK] (on your Android device ) or [Complete] (on your iOS 
device).
≥ If you want to check the Device ID and Password after performin g Step 7, on the screen of this 
unit, touch [Setup]  # [Home Monitor Connect].
7Touch [ENTER] on the screen of this unit.≥Check that the message “Connecting...” has disappeared from thi s unit.
8On the smartphone, select [Start Home...

- 126 -
∫
If the device is Android (NFC-compatible)
≥Set the NFC function of the smartphone to on.
1Start up the smartphone application “Image App”.≥When a Wi-Fi connection guidance screen is displayed, select [N O].
2Display the screen of a connection setup to home monitor from t he menu of a 
smartphone.
3Touch the smartphone on   of this unit.≥ Touch the NFC mark while a message asking you to touch the 
NFC mark on the device is displayed on the smartphone screen. 
≥ If the unit is not recognized even...

- 127 -
An image or sound may be interrupted or a connection may be disconnected depending on the line 
state. Set IMAGE QUALITY with this unit or the smartphone appli cation “Image App” by using the 
following values of the recommended optimal speed (upstream) as  a guide.
∫Recommended optimal speed (upstream) for the broadband line, mo bile 
router (tethering), etc. connected to this unit
≥ For information on the optimal speed, contact your service prov ider, etc.
≥Operation cannot be guaranteed for...

- 128 -
∫What you can set with a smartphone
Moving/non-moving object detection
This unit can detect moving objects and non-moving objects in t he home monitoring detection area.
Automatic recording
You can record a motion picture on this unit as it detects a mo ving or non-moving object.
≥ Setting cannot be performed while operating monitoring with a s martphone.
Touch [Setup] and select desired setting.
∫[Home Monitor Connect]
You can display the registration screen for a Device ID and Pas sword.
≥ If...

- 129 -
Connecting this unit to a DLNA-compatible device via Wi-Fi, you can playback scenes and still 
pictures on the DLNA device.
A DLNA-compatible Device
Preparations before using [DLNA Play]
1Check if the wireless access point is compatible with IEEE802.1 1b/g/n.
2 Check if the Device is DLNA-compatible.
3 Set up a Wi-Fi connection between this unit and the wireless access point.
≥[WPS Connection] ( l145 )
≥ Searching for wireless access points to set up a connection ( l146)
≥ Setting up a connection...

- 130 -
2Select this unit (SSID) by the TV side.≥Select SD media and select the motion picture ([AVCHD/MP4]) or  still picture ([JPEG]) to play 
back.
3Perform playback operations with the TV remote control.≥ Playback operations may differ depending on the TV in use.
≥ The following operations can be performed if a color button is 
pushed.
Blue/Red: Skip playback
≥ Fast forward/Fast rewind playback cannot be performed.
≥ You cannot perform playback operations with this unit.
To exit [DLNA Play]:Touch...