Panasonic Gu87 Operating Instructions

Tools & Set Time Menu  27
Logo
Download logos from 
the internet to your 
phone.
Network dependent.See details about this service at:
http://www.panasonic.com/wireless
1.After you download a logo, you will receive a message 
containing your selection. Press 
.
2.Scroll to folder to store logo, press   twice.
Logo is saved and can be selected as wallpaper. 
See “Wallpaper” on page 72.
SET TIME/ALARMS
Clock SetIn Tools & Set Time Menu  ...
Phone has two clocks, 
a home clock and an 
away clock that can...

28   Tools & Set Time Menu
AWAY CLOCK: SETTING DAYLIGHT SAVINGS TIME
In Tools & Set Time Menu  ...
1.Scroll to Set Time/Alarms, press  .
2.Press 
 (Set Date/Time).
3.Scroll to Away, press  .
4.Scroll to Summer(DST), press 
.
5.Scroll to On or Off, press .
AWAY CLOCK: SETTING AUTO ADJUSTMENT
If you travel in a country/region that has a roaming 
agreement with your wireless service provider, the Away 
Clock automatically adjusts to the local time.
Note: In countries/regions that have several time zones,...

Tools & Set Time Menu  29
Set Alarm(s)In Tools & Set Time Menu  ...
Set up to 4 separate 
alarms with unique alert 
tones.1.Scroll to Set Time/Alarms, press  .
2.Scroll to Set Alarm(s), press 
.
If clock has not been set, you are prompted to set 
clock first. See “Clock Set”  starting on page 27.
 Warning: Ensure that any Alarm settings will not 
automatically power on the phone when in a 
location that it may interfere with medical 
equipment, aircraft, blasting areas, etc.... See 
“Safety First”...

30   Tools & Set Time Menu
Set Pwr-Up Time or
Set Pwr-Dwn Time
In Tools & Set Time Menu  ...
Set phone to 
automatically turn itself 
on or off at a specified 
time.1.Scroll to Set Time/Alarms, press  .
2.Scroll to Set Pwr-Up Time or Set Pwr-Dwn Time, 
press 
.
3.Enter time in 24-hour military time format, press .
4.Select interval (Repeat Daily, Once, or Disabled), 
press 
.
 Warning: If setting Pwr-Up Time, ensure phone 
will not automatically power on in a location where it 
may interfere with medical...

Tools & Set Time Menu  31
UNIT 
CONVERTER
SETTING AN INITIAL CONVERSION RATE
Perform currency 
calculations based on a 
programmable 
conversion rate.In Tools & Set Time Menu  ...
1.Scroll to Unit Converter, press   twice.
2.Enter an abbreviation for the home currency (up to 3 
characters), press 
 twice.
3.Enter an abbreviation for the foreign currency (up to 3 
characters), press 
 twice.
4.Enter the currency conversion rate, press  twice.
CALCULATING A CONVERSION
In Tools & Set Time Menu  ...
1.Scroll...

32   Tools & Set Time Menu
INFRARED PORTPREPARING AN INFRARED CONNECTION 
Transfer data between 
your phone and other 
devices (that have an 
infrared port) using an 
infrared connection. A 
remote control sends 
infrared signals to your 
TV, VCR, etc. to control 
volume or change 
channels. Infrared also 
enables you to use 
GSM fax and data 
services, and provides 
access to the Internet 
and e-mail through 
existing applications.
Note: Downloaded files 
with a copyright cannot 
be transferred via...

Tools & Set Time Menu  33
Receive DataIn Tools & Set Time Menu  ...
Set phone to receive 
data via the infrared 
port.1.Scroll to Infrared Port, press 
.
2.Press  (Receive Data).
Data is automatically received by phone.
3.To save the received data:
Connect Modem
Set phone to use a 
wireless modem 
connection.TEST THE INFRARED CONNECTION
Verify that your GU87 and your PC are properly connected.
Note: The following steps describe Windows standard 
communication software (HyperTerminal).
1.Power on your...

34   Tools & Set Time MenuIf GU87 has successfully connected, you will 
receive an OK reply. 
CONNECTING TO THE INTERNET USING YOUR GU87 
AS A MODEM
Note: Windows Dial-Up 
Networking version 1.4 
or later must be 
installed, if running 
Windows 98. Upgrades 
available at: 
www.microsoft.com
To use the GU87 phone as a modem there are two options; 
connect using the infrared port or using the Panasonic 
Serial Data Cable (EB-RSD67). See “Accessories” on 
page 12 for Serial Data Cable information. 
For...

Camera Menu  35
CAMERA MENU
*From standby, press 
 to use the camera.
The camera is the 
default shortcut setting 
for the   key. To 
change the setting, see 
“Short Cut Key” on 
page 74.
Note: You cannot take 
a picture while on a call.To open the Camera Menu:
1.From standby, press   to open main menu display.
2.Scroll/move to highlight Camera Menu icon  , 
press 
.
Note: Battery times are shorter when using the camera. To 
help conserve your battery, the phone automatically exits 
camera mode after 3...

36   Camera Menu
 If there is an incoming call before you save the picture, it 
is temporarily saved. After the call, return to camera 
operation and complete step4.
 If phone automatically exits camera mode after step3, 
return to camera operation and complete step4.
 If phone is turned off, temporary images are deleted.
Take a Self-Portrait1.Open flip and press  , OR, open the Camera 
Menu ...
2.Close flip.
3.View yourself in the self-portrait mirror.
4.Press shutter button  .
5.Open flip.
6.To save...