Panasonic Gu87 Operating Instructions

Phone Basics & Managing Calls  17
PHONE BASICS & MANAGING CALLS
ON/OFFPress and hold  .
 When turning the phone on, first there is a brief 
animation, then the standby display comes on.
 If the phone is locked, 
 displays. Enter the 4-digit 
lock code and press  (Ok). See “Lock Phone” on 
page 87.
 If your SIM card is PIN protected, your PIN code will be 
requested. Enter the PIN code and press  . See “PIN 
or PIN2” on page 88.
STANDBY MODEThe standby display shows the name of the wireless 
service...

18    Phone Basics & Managing Calls
 For an emergency call, dial 911 and press  . (911 
dialing works even if the phone does not have a SIM 
card or if the phone is locked.)
 If a call does not connect, press
  when Ok displays 
to automatically redial the number (up to 10 times). 
The phone beeps when the call connects. To cancel 
redial, press  .
Warning: Shutting the flip during a call DOES NOT 
end the call. Opening the flip again allows you to 
return to your previous conversation.
Standard...

Phone Basics & Managing Calls  19
Voice Dialing1.To record a voice command, see “Voice Dialing” on 
page 60.
2.From standby, press and hold the top or bottom of the 
navigation key until Please Call Voice Dialing 
displays.
3.Clearly say the name (exactly as recorded) and wait.
Phone number and Voice Dial entry are repeated.
If phone does not recognize your voice command, 
Failed Please Retry displays.
4.To initiate the call, press  .
Last Number Dialing1.Press  twice to call the last dialed number....

20    Phone Basics & Managing Calls
SMS Message 
DialingA phone number included within an SMS message can be 
dialed directly. See “Inbox” starting on page 47.
ENDING CALLS1.Press .
ANSWERING 
CALLSWhen there is an incoming call, the phone rings and 
flashes green.
 If the phone is set to Quiet Mode or vibrate option, the 
phone flashes green and vibrates instead of ringing.
1.Open flip and press any key except  .
Pressing any key to answer is the default setting. If 
you change the setting, answer by...

Phone Basics & Managing Calls  21
See “Voice-Mail” on page 63 to view the voice mail 
center number.
Quiet Mode
Quickly change the ring 
volume and vibration 
setting of your phone to 
suit your environment. 
For example, the preset 
Quiet Mode setting 
mutes the ringer and 
turns vibration on, 
perfect when entering a 
meeting or movie.1.To quickly set the phone to your preset Quiet Mode 
settings, press and hold .
To change your Quiet Mode settings, see “Quiet 
Mode” on page 74.
2.To disable, press...

22    Phone Basics & Managing Calls
Note Pad
During a call, use the 
keypad to enter 
numbers (like using a 
notepad to write down a 
number to call later).1.During a call, enter a phone number.
2.When call ends, press  to call notepad number.
OR
When call ends, press   to store notepad number in 
the phonebook. See
 “Create” on page 58.
Touch Tones (DTMF)
Touch tones can be 
transmitted during a call 
just by pressing the 
keys (0 to 9, #, *) on 
your phone. Touch 
tones are often used to 
access voice...

Phone Basics & Managing Calls  23
Two Calls at OnceINCOMING CALL WHILE ON A CALL
(Voice calls only. Does 
not apply to data and 
fax calls.)Call Waiting must be on. See “Voice Calls” on page 85.
1.While on one call, you may receive another call.
2.If so, press 
 and scroll to desired option:
OR
Press   to end first call, then press any key except 
 or   to answer incoming call.
Any Key answer is default setting. See “Answer 
Key” on page 76.
3.Pressing   will end both calls.
MAKING A SECOND CALL...

24    Phone Basics & Managing Calls
Multi-Party Calls
A multi-party call has 3 
to 5 people in 
conversation at the 
same time.
SIM card dependent.1.Establish a multi-party call by merging two calls.
See “Two Calls at Once” on page 23.
2.Continue to add people to the multi-party call (up to 5 
connections total) by calling the person or by 
accepting an incoming call.
When making a call or accepting an incoming call, 
the multi-party call is placed on hold. The callers 
already in the multi-party call...

Tools & Set Time Menu  25
TOOLS & SET TIME MENU
To open the Tools & Set Time Menu:
1.From standby, press   to open main menu display.
2.Scroll/move to highlight Tools & Set Time Menu icon 
, press 
.
GAME(S)In Tools & Set Time Menu  ...
Play TETRIS
® or 
Herding Sheep.1.Press  [Game(s)].
2.Scroll to desired game, press .
See “Games Menu” on page 39 for instructions.
VOICE MEMO
Record
Record a voice memo 
for yourself. Or, record 
your conversation 
during a call. You may 
record up to four voice 
memos,...

26   Tools & Set Time Menu
PlaybackFrom standby, press  , continue with step 2 below.
Listen to your recorded 
conversations.OR
In Tools & Set Time Menu  ...
1.Scroll to Vo i c e  M e m o, press 
.
2.Scroll to Playback, press  .
3.Scroll to desired recording (saved by date and time 
recorded), press 
.
Notes:
Hold the earpiece up to your ear to hear the 
recording.
Scroll up or down to adjust volume.
If you need a “notepad”, use your keypad to enter 
numbers during playback.
DeleteFrom standby, press...