Panasonic GT50 Tv User Manual

							Watching TV
Computer on TV
PC adjustments (2)
 MENU   Menu > Picture  > PC adjustments
Settings OptionsDescription
Clock  phase
 Alleviates the problem if the whole picture
appears to flicker or is blurred. First  adjust the Dot
Clock  to get the best possible picture, then  adjust
the Clock  phase so that a clear picture  appears. 
It may not be possible to display a clear picture
due to poor  input signals.
Input
resolution
 Switches  to wide display and selects the
appropriate screen  resolution. 
VGA (640  x 480 pixels), WVGA (852  x 480
pixels), XGA (1,024 x 768 pixels), WXGA (1,280 x
768 pixels) 
Options  change depending on signals.
H-frequency
V-frequency
 Displays the H (Horizontal)/V (Vertical)
frequencies.
Display range
Horizontal: 15 - 110 kHz
Vertical: 48 - 120 Hz
41  
						

							Watching TV
Computer on TV
Input  signal
Signals other than  below may not be displayed properly.
The signals are  reformatted for optimal viewing on your  display.
Computer signals which can be input are  those  with a horizontal scanning
frequency of 15 to 110 kHz and vertical scanning  frequency of 48 to 120 Hz.
(However, the image will not be displayed properly if the signals exceed 1,200  lines.)
Input signal Horizontal frequency  
(kHz) Vertical frequency  
(Hz)
640 x 480 @60 31.4759.94
852 x 480 @60 31.4459.89
800 x 600 @60 37.8860.32
1,024  x 768 @60 48.3660.00
1,280  x 768 @60 47.7859.87
1,280  x 1,024  @60 63.9860.02
1,366  x 768 @60 48.3960.04
42  
						

							Internet services VIERA Connect
Connect to network
Network connections  (1)
1.
Contact your Broadband service provider If you dont have Internet service from your  local provider, please  order a high-
speed Internet service at no less than  the connection speed below. If you already
have this service,  make  sure  that the connection speed exceeds the following:
Required speed (effective): at least 1.5 Mbps  for SD and 6 Mbps  for HD  picture
quality, respectively.
Dial-up Internet service cannot  be used for VIERA  Connect.
2.Select wired or wireless connectionIf the Cable/DSL modem is close to the TV and you have only one TV set, you may
choose a wired connection.
If the Cable/DSL modem is far from the TV and/or you have more TVs in the
house,  you may want to use a wireless network.
43  
						

							Internet services VIERA Connect
Connect to network
Network connections  (2)
3.
Connecting to the Internet
A.  Wireless connection
If you are  using the network  for connecting various pieces of equipment and want
to connect  the TV, you could also use a Wireless LAN  and Access point to connect
the TV to the Internet.
TV
(Built -in  Wireless  LAN)
Access  
point - Hub, Router
- Modem
- DLNA Certified  media  server
(for example, PC, etc.)
*To use only DLNA features, you can operate the features without Broadband
network  environment.
You can just connect  the TV directly to the equipment with a LAN  cross cable.
44  
						

							Internet services VIERA Connect
Connect to network
Network connections  (3)
B.  Wired connection (Directly connected)
If you are  not using the network  for connecting anything else but the TV, you can
just connect  the TV directly to the Cable/DSL Ethernet modem with LAN  cable.
        
TV
ETHERNETLAN  cableModem
45  
						

							Internet services VIERA Connect
Connect to network
Network connections  (4)
C. Wired connection (Using Router)
If you are  using the network  for connecting various pieces of equipment and want
to connect  the TV, you should  use a router to connect  the TV to the Internet with
LAN  straight cable.
TV
ETHERNETLAN  cable- Hub, Router
- Modem
- DLNA Certified  media  server
(for example, PC, etc.)
*To use only DLNA features, you can operate the features without Broadband
network  environment.
You can just connect  the TV directly to the equipment with a LAN  cross cable.
46  
						

							Internet services VIERA Connect
Network settings
Setting menu
This menu  is used for connecting to a Broadband environment.
1.Display the Menu and  select Network
 MENU Menu > Network
Select  Network  using 
/ from menu  bar  and press  
2.Select the options and  set
(Connection test /Network connection /Wireless network settings /
IP address/DNS  settings /Network link/ Software  update /
New  software notice /Wake  on LAN /Network status )
47  
						

							Internet services VIERA Connect
Network settings
Connection  test
Connection test
Check that the all  Network settings, and then  start  Connection test
Select  Connection test  using / and press  
(It takes a while to cancel the test.)
Displayed Connection test screen
Check mark appears at front  of each check items box when check has
been finished  successfully.
Complete Connection test
Success 
 Completion screen  is displayed.
Error 
 Follow the directions on screen  to complete the setting.
If you perform  the Proxy settings, check the Proxy address and the Proxy port
number.
48  
						

							Internet services VIERA Connect
Network settings
Network connection
Network connection
Select Network connection  using /
Select Network type (Ethernet cable/Wireless (WiFi) ) with /
49  
						

							Internet services VIERA Connect
Network settings
Wireless network settings
Wireless network settings
Select Wireless network settings  with / and press  
Display Wireless networks  and select access point.
Or select connection method  (below) with color key and follow the
directions on screen  to complete the setting.
WPS  (push  button):
You can connect  to the access point by pressing a connection button.
WPS  (PIN):
Set  the PIN code that is displayed on the TV on the access point.
Manual  settings:
Manually  set SSID, security  type, and encryption type to match the settings
of the access point to which to connect.
Search again:
Search again  an available  wireless network  within the range.
* Wi-Fi Protected Setup is an easy setting  of the Wi-Fi Alliances  certification.
* For more details on setting  of an access point,  please  refer to operating manual
for the access point.
* When connecting by 11n (5 GHz), select AES as the encryption type for the
wireless LAN.
50