Panasonic GT50 Tv User Manual

							Pedestal / Power cord208
Meaning of signs :
Press the Remote  control  button
INFO  Letters in box : Remote  control  button
MENU  Letters

 in Cyan : Menus  on screen  display
11  
						

							Watching TV
Cable / Satellite / Fiber with a box
Initial setting
1.
Connecting Select the wiring method connecting your  box to the TV, AV IN  or
Antenna/Cable  in.
Tip: HDMI will provide the best HD  picture
2.Change INPUT
 INPUT
Press the INPUT button to select the proper connection. Wait 2 seconds.
3.Power  on your Cable , Satellite or Fiber box Use the boxs remote control  to change channels.
* If the box is connected to the TV using a COAX cable (Antenna/Cable  in), then
set the TV channel  to CH3  or CH4. Note that the picture  will not be in HD.
*CC/SAP is not available  when watching  TV with a Cable or Satellite box
connected via HDMI.
* If your  box is a high definition, then  check that it is outputting 720p or 1080i
signal.
Tip: press  the TVs 
INFO  button to verify.
* Check your  box aspect or format settings. It should  be set to 16:9,
Widescreen or FULL .
* If the audio  volume is too low, check the boxs audio  settings.
* Contact  your  Cable or Satellite provider for instructions on any box settings.
12  
						

							Watching TV
Antenna / Cable service without a box
Initial setting
1.
Connect coax
Connect a COAX wire from either  an antenna or Basic  Cable service to the TVs
ANTENNA/CABLE  IN screw terminal.
    
TV ANTENNA/
CABLE IN
Antenna
2.Scan the channel
 MENU   Setup
 > ANT/Cable setup  > ANT in, Auto program
1. Select Programming  source  Cable  or Antenna in Ant in.
2. Select Auto program  and select scan mode
      (All  channels /

 Analog only  / Digital only ).
3. Start scanning.
* If at the end of the scanning  no channels  are  found, then  check:
Antennas position  - or Availability of Cable service.
Cable, Satellite or Fiber services with a box are  typically connected to the TVs
A/V inputs,  preferably  HDMI, for best HD  picture. In such a case, the channel
scanning  is not needed (set ANT IN  to Not  used).
13  
						

							Watching TV
Antenna / Cable service without a box
Select channels
Select desired channel
    or   
CH  buttons are  also available  on the TV.
Select desired digital  channel
To directly enter a digital channel  number use 
When turning to a digital channel, press  the button to enter the minor  number in a
compound channel  number.
(e.g.  CH15-1
)
* This TV has a Channel transition effect function  that displays transition picture
images when tuning the channels.
 Set

 to 
Off to

 disable this function.
 Menu > Setup  > 

Advanced setup > Channel  transition effect
 This

 function  is not available  depending on the input signal.
14  
						

							Watching TV
Antenna / Cable service without a box
Favorite channels  (Set)
Channel numbers registered  in Favorite are  displayed on the favorite tune  screen.
Select the desired broadcast station  with the cursor or use the number buttons.
Favorite channels  cannot  be set when using Cable or Satellite box
Set the Favorite channel
 OPTION   Options menu > Set favorite
Select the list number using 
/ and  or  directly to save the
displayed channel.
Delete a Favorite channel
 OPTION   Options menu  > Set favorite
Select the list number using 
/ and  (press and hold) to delete.
* To change the page in Set favorite
   FAVORITE  or / repeatedly
15  
						

							Watching TV
Antenna / Cable service without a box
Favorite channels  (Display)
Channel numbers registered  in Favorite are  displayed on the favorite tune  screen.
Select the desired broadcast station  with the cursor or use the number buttons.
Favorite channels  cannot  be set when using Cable or Satellite box.
To display a Favorite channel
 FAVORITE   Favorite channels
Select the list number using 
/ and  or  directly to displayed
on favorite screen.
* To change the page in Favorite channels
 FAVORITE  or / repeatedly
16  
						

							Watching TV
Antenna / Cable service without a box
Closed  caption
Viewing with Closed caption
 CC
Switches  the Closed caption mode.
(  Closed caption Off  / Closed caption On / Closed caption On mute  )
*CC  is not available  when watching  TV with a Cable or Satellite box connected
via HDMI.
* Contact  your  Cable or Satellite operator for instructions on enabling CC  with
their  box.
* The TVs CC  button does not operate the Satellite or Cable boxs CC  function.
* For viewing the CC  of digital broadcasting,  set the aspect  to FULL  (If viewing
with H-FILL, JUST, ZOOM or 4:3; characters might  be cut off).
* If the CC  is set to On on both  the receiver and TV when the signal is 480i
(except for the HDMI connection),  the CC  may overlap on the TV.
* If a digital program is being  output in analog  format, the CC  data  will also be
output in analog  format.
* If the recorder or output monitor is connected to the TV, the CC  needs to be set
up on the recorder or output monitor.
17  
						

							Watching TV
Antenna / Cable service without a box
SAP
Listen with SAP (Secondary Audio Programming)
SAP  is not available  when watching  TV with a Cable or Satellite box connected
via HDMI.
Contact  your  Cable or Satellite operator for instructions on enabling SAP  with
their  box.
The TVs SAP button does not operate the Satellite or Cable boxs SAP
function.
Select the Audio mode  for watching  TV.
 SAP
Digital mode: Select available  audio  service when receiving  a digital channel.
Audio track is automatically selected as DTV language  and  SAP settings  in
Audio  menu.
Menu  > Audio  > DTV language  and  SAP settings
* If you change the audio  settings  with the 
SAP  button, the DTV language and
SAP  settings  will not change.
Audio track 1 of 7 Track number / Number of tracks
English (Main Audio)
 Current audio  track information  (language, audio
        type)
English audio Audio service information
(example)
Analog mode: Select the desired Audio mode. ( Stereo  / SAP / Mono  )
18  
						

							Watching TV
Antenna / Cable service without a box
Other
1.
Information banner Displays TV status information. Also, when watching  programs via the
Antenna/Cable input,  INFO will include the channel  banner.
 INFO
Channel / Station identifier / Program title / Closed caption / SAP  / 
Rating level / Signal resolution / Picture mode  / Aspect ratio  / 
Sleep timer remaining time / Clock
2.Options menuThis menu  consists of shortcuts to convenient functions.
 OPTION
Channel  surf mode : Specify favorites or type of channels  to view  when
pressing the channel  up/down button.
Set favorite : Set  favorite channel
Edit CH caption : Edit the channel  identifier
Signal meter : Check the antennas signal strength
*Options  menu  is only available  when the TV is using the Antenna/Cable input,
not when using Cable or Satellite box.
19  
						

							Watching TV
Blu-ray, DVD, Game Console, etc.
Connecting  and  viewing (1)
1.
Connect device Verify that the device is connected to the TV properly and connect  to desired
terminal. Note which terminal the device is connected to (HDMI 1, HDMI 2,...
Component or Video)
Component and Composite (Video) in terminals are  shared.
Please be careful  not to confuse  the connection when you use Component or
Video.
20