Panasonic GT50 Tv User Manual

Watching TV
For best audio
Basic  adjustments
1.
Change the basic  audio  settings 1. Select desired audio  menu
 MENU   Menu  > Audio
Select desired menu  using 
/ from menu  bar  and press  
2. Adjust Adjust using 
/
Settings Description
Reset to defaults
Resets Bass,  Treble, and Balance adjustments to factory
default  settings.
Bass
Increases or decreases the bass response.
Treble
Increases or decreases the treble  response.
Balance
Emphasizes  the left / right  speaker volume.
31  

Watching TV
For best audio
Advanced  audio
 MENU    Menu  > Audio  > Advanced audio
Settings OptionsDescription
A.I.  sound Off/On
Equalizes overall  volume levels across  all
channels  and external inputs.
Surround Off/On
Enhances  audio  L/R response when listening
to stereo. Ideal for music and action movies.
Volume leveler Minimizes  volume disparity after  switching to
external inputs.
Distance to
wall Over 1ft(30cm)/
Up to 1ft(30cm)Over 1ft(30cm):  TV is on a stand. Keeps
current setup.
Up to...

Watching TV
3D
Notice
The following 3D content can be enjoyed  on this TV:
A 3D Blu -ray disc, played  on 3D capable  Blu -ray player/recorder that is connected
via HDMI cable
3D TV broadcast (program)
3D Photo and 3D Movie taken  by LUMIX/Camcorder.
3D game  played  on 3D capable  video game  console, connected via HDMI cable.
2D3D (Simulated 3D)
About 2D3D
* You can watch content in simulated 3D from photo  and all  video sources  except
the PC input.
* This function  converts standard 2D images and...

Watching TV
3D
Viewing 3D
1.
Using the 3D  Eyewear
Turn on the 3D Eyewear.
Make  sure  that registration  is finished  completely. 
(Displays messages and information  on the screen.)
Put  on the 3D Eyewear.
2.View When the TV receives a 3D signal, it also tries to detect the 3D mode  (format). 3D
images are  automatically displayed according to the signal. If the 3D images are
not displayed correctly or the images cause discomfort, the images can be
adjusted by 3D  format select  or 3D  settings....

Watching TV
3D
Change  3D  ⇔ 2D
Simply switches  3D   2D  images  (Auto  mode)
 3D   3D  format select
Switch   3D or 2D  using 
/ and press  
Change 3D  format (Manual mode)
1.Display  3D  format select (Manual)
    3D  format select (Manual)
2.Select 3D  format
 3D   Cycle  through the 3D format
( Native /Frame  sequential (3D) /Frame  sequential (2D) /Side by
side (3D) /Side by side (2D) /Top and  bottom (3D) /Top and  
bottom (2D) /2D
3D )
35  

Watching TV
3D
Adjust 3D  images
1.
Select  3D  settings
 MENU   Menu > Setup  > 3D  settings
2.Select the item  and  set
Select desired menu  using 
/ and adjust the settings  with /
* The perceived three dimensional effects  of the 3D Eyewear differ from person-
to-person.
* If a signal received from an external device is different from the 3D setting  of the
TV, such as 2D signal when the TV is set to 3D mode, the images may not be
displayed correctly.
36  

Watching TV
3D
3D  settings (1)
 MENU   Menu > Setup  > 3D  settings
Settings OptionsDescription
Auto detect 3D Off/
Auto 1/
Auto 2Auto 1: Switches  to 3D display when 3D
indication is available  (HDMI (3D), AVCHD  file,
etc.)
Auto 2: Same as Auto 1. Also  detects 3D signal
by identifying  similar image in side-by-side or top-
and-bottom 3D formats.
Note: Choose  3D mode  manually  when auto
detection is not available. 
3D signal
notification Off/
OnOn: Displays a message according to the
signal received...

Watching TV
3D
3D  settings (2)
 MENU   Menu > Setup  > 3D  settings
Settings OptionsDescription
3D adjustment
Off /OnChanges  3D depth  by adjusting  left-right
parallax. Set  to On to adjust Effect  (-3  to +3 ).
Left/Right swap
Normal /
SwappedChange  this to Swapped  when the phases
are  reversed (When  there is an unusual  sense of
depth).
Diagonal  line
filter
Off /OnOn: Resolves discomfort caused by receiving  a
quincunx  matrix signal.
Safety
precautions
 Displays message for viewing 3D images.
38  

Watching TV
Computer on TV
Display PC screen
1.
Connect PC Connect the PCs video output to the PC terminal of this TV with PC cable.
To listen to the PC sound,  connect  an audio  cable between the computer and the
TV.
2.Select Input and  display1. Display Input select  menu  (With the connected equipment turned On)
 INPUT
2. Select the PC input
    Select

 
PC
  input using 
/ and press  
3. Display PC screen
39  

Watching TV
Computer on TV
PC adjustments (1)
 MENU   Menu > Picture  > PC adjustments
Settings OptionsDescription
Reset to
defaults
 Resets all  PC adjustments to factory  default
settings.
Sync H & V
The H and V sync signals are  input from the
HD/VD connector.
On green
Uses a synchronized signal on the Video G
signal, which is input from the G connector.
Dot clock
 Alleviates the problem if a picture  appears to
be vertically-striped, flickers partially  or is blurred.
H-position
 Adjusts the...