Panasonic Gh5 Manual

221
9. Using Menu Functions
Applicable modes: 
Select the luminance range to match the use of video.
Settings: [0-255]/[16-235]/[16-255]
• If you set [Rec Quality] to a 10bit motion picture setting, the available options change to 
[0-1023], [64-940], and [64-1023].
• This function works only for motion pictures. Still pictures ( including those you take during 
motion picture recording) will be taken with [0-255].
• When [Rec Format] is set to [AVCHD] or [MP4], [0-255] in [Lumi nance Level] will switch...

9. Using Menu Functions
222
Applicable modes: 
This will reduce the wind noise coming into the built-in microphone while maintaining 
sound quality.
Settings: [HIGH]/[STANDARD]/[OFF]
• [HIGH] effectively reduces the wind noise by minimizing the lo w-pitched sound when a strong 
wind is detected.
• [STANDARD] extracts and reduces only the wind noise without de teriorating the sound quality.
• You may not see the full effect depending on the recording con ditions.
• This function works only with the...

223
9. Using Menu Functions
: [Custom] menu
[Exposure]• [ISO Increments] (P224)
• [Extended ISO]  (P224)
• [Exposure Comp. Reset]  (P224)
[Focus / Release Shutter]• [AF/AE Lock] (P104)
• [AF/AE Lock Hold]  (P224)
• [Shutter AF]  (P224)
• [Half Press Release]  (P224)
• [Quick AF]  (P225)
• [Eye Sensor AF]  (P225)
• [Pinpoint AF Setting]  (P225)
• [AF Assist Lamp]  (P225)
• [Focus/Release Priority]  (P226)
• [Focus Switching for Vert / Hor]  (P95)
•[AF+MF]  (P226)
• [MF Assist]  (P226)
• [MF Assist...

9. Using Menu Functions
224
You can adjust the ISO sensitivity settings for every 1/3 EV.
Settings: [1/3 EV]/[1 EV]
ISO sensitivity can be set up to minimum [ISO100].
An exposure value can be reset when the Recording Mode is changed or the camera is 
turned off.
When [ON] is selected, focus and  exposure stays locked even if you press and release 
[AF/AE LOCK]. Press the button again to cancel the lock.
Set whether or not the focus is adjusted automatically when the  shutter button is pressed 
halfway....

225
9. Using Menu Functions
As long as the camera is held steady, the camera will automatically adjust the focus and 
focus adjustment will then be quicker when the shutter is press ed.
The camera automatically adjusts the focus when the eye sensor  is active.
AF assist lamp will illuminate the subject when the shutter but ton is pressed half-way 
making it easier for the camera to focus when recording in low  light conditions.
[Quick AF]
• The battery will be consumed faster than usual.
• This function...

9. Using Menu Functions
226
Set whether to enable recording even when focus is not achieved with Auto Focus.• Different settings can be applied to different Focus Mode settings ([AFS/AFF], [AFC]).
When AF Lock is ON (press the shutter button halfway with the f ocus mode set to [AFS] or 
set AF Lock using [AF/AE LOCK]), you can make fine adjustments  to the focus manually.
Sets the display method of MF Assist (enlarged screen).
• Available settings vary depending on the lens used.
When an interchangeable...

227
9. Using Menu Functions
If you select [CUSTOM], you can customize the Quick Menu settings. (P59)
Sets the control functions to be disabled with the function but ton [Operation Lock]. If you 
set one of the following items to [ON], the corresponding contr ol functions will be disabled 
when the operation lock function is used.
Enables/disables the motion picture button.
Enables/disables the Touch operation. >
 [Custom]  >  [Operation]
[Q.MENU]
[Operation Lock Setting]
[Cursor] Disables the functions...

9. Using Menu Functions
228
Displays a picture immediately after it is taken.• [Duration Time (6K/4K PHOTO)] works only for 6K/4K photo recording, while [Duration Time 
(Post Focus)] works only for Post Focus recording.
• If you set [Playback Operation Priority] to [ON], you can perf orm certain playback operations 
during Auto Review. For example, you can switch between differe nt types of playback screens 
or delete pictures.
• If you select [HOLD], the picture taken stays displayed until  the shutter...

229
9. Using Menu Functions
Display the histogram.
You can set the position by pressing 3/4/2 /1 .
• Direct touch operation is also possible from the recording scr een.
• A histogram is a graph that displays brightness along the hori zontal axis (black 
to white) and the number of pixels at each brightness level on  the vertical axis.
It allows you to easily check a picture’s exposure.
A dark
B bright
This will set the pattern of guide lines displayed when taking  a picture.
When [ ]  is set, guideline...

9. Using Menu Functions
230
Indicates parts that may become white saturated through overexposure in a zebra pattern.
Select [SET] to set the brightness to be processed as a zebra pattern.
• You can select a brightness value between [50%] and [105%]. In [Zebra 2], you can select  [OFF]. If you select [100%] or [105%], only the areas that are  already white saturated are 
displayed in a zebra pattern. The smaller the value is, the wid er the brightness range to be 
processed as a zebra pattern will be....