Panasonic G6 Manual

291
Connecting to other equipment
∫Functions that cannot be used during 3D recording
When recording with the 3D interchangeable lens (H-FT012: optional), the following 
feature will be disabled:
(Recording functions)
•
Auto Focus/Manual Focus operation•Aperture setting
•Zoom operation•Recording motion pictures¢ 1
•Panorama Shot Mode
•[Glistening Water]/[Glittering Illuminations] (Scene Guide Mode)•[Impressive Art]/[High Dynamic]/[Toy Effect]/[Toy Pop]/[Star Filter]/[One Point Color]/[Sunshine] 
(Creative...

292
Connecting to other equipment
Connecting the camera to a 3D compatible television and playing back pictures taken in 
3D allows you to enjoy 3D pictures for extra impact.
It is also possible to play back the recorded 3D pictures by inserting an SD card into the 
3D compatible television with an SD card slot.
Connect the unit to a 3D compatible television using the HDMI mini cable 
and display the playback screen.  (P294)
•When [VIERA Link] (P61) is set to [ON] and the camera is connected to a TV...

293
Connecting to other equipment
•When a picture recorded in 3D is displayed on this unit, it is played back in 2D (conventional 
image).
•A black screen is displayed for a few seconds when switching playback back and forth from 3D 
to 2D pictures.
•When you select a 3D picture thumbnail, it may take a few seconds for playback to start. After 
playback, the thumbnail display may take a few seconds to reappear.
•When viewing 3D pictures, your eyes may become tired if you are too close to the television...

294
Connecting to other equipment
Playing Back Pictures on a TV Screen
Pictures recorded with this unit can be played back on a TV screen.
•
Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality 
may vary with the connected terminals.
1High quality
2 HDMI socket
3 Video socket
1Connect the camera and a TV.
•Check the direction of the terminals and plug in/out straight holding onto the plug. (It 
may result in malfunction by the deforming of the terminal if it is...

295
Connecting to other equipment
2Turn on the TV and select the input to match the connector in use.
3Turn the camera on and then press [(].
•Input of the TV will switch automatically  and playback screen is displayed when 
connected to a VIERA Link compatible TV using an HDMI mini cable with the [VIERA 
Link]  (P61)  set to [ON].  (P296)
•Depending on the [Aspect Ratio], black bands may be displayed on the top and bottom or the 
left and right of the pictures.
•Change the screen mode on your TV if the...

296
Connecting to other equipment
1Connect this unit to a Panasonic TV compatible with VIERA Link with 
an HDMI mini cable (optional) (P294).
2Turn the camera on and then press [ (].
3Operate with the remote control for the TV.
•Operate with reference to the operation icons displayed on the screen.
•To play back the audio of the motion pictures, set the [Sound] in the Slide Show setting screen 
to [AUTO] or [Audio].
•It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there...

297
Connecting to other equipment
∫Other linked operations
Turning this unit off:
If you use the remote control for the TV to turn the TV off, this unit is also turned off.
Automatic input switching:
•
If you connect with an HDMI mini cable and then turn this unit on, and then press [ (], the input 
channel on the TV automatically switches to this unit’s screen. If the TV’s power is in standby 
status, it will turn on automatically (if [Set] has been selected for the TV’s [Power on link] 
setting)....

298
Connecting to other equipment
Saving still pictures and motion pictures on your 
PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
•Some PCs can read directly from the card removed from the camera. For details, refer to the 
operating instructions of your PC.
•If the computer being used does not support SDXC Memory Cards, a message 
prompting you to format may appear. (Doing so will cause recorded images to be erased 
so do not choose to format.)
If the card is not...

299
Connecting to other equipment
The supplied CD-ROM includes the following software.
Install the software on to your computer before use.
•
PHOTOfunSTUDIO 9.2 PE (Windows XP/Vista/7/8)
This software allows you to manage images. For example, you can send pictures and motion 
pictures to a PC and sort them by recording date or model name. You can also perform 
operations such as writing images to a DVD, processing and correcting images, and editing 
motion pictures.
•SILKYPIX Developer Studio 
(Windows...

300
Connecting to other equipment
∫Installing supplied software
•
Before inserting the CD-ROM, close all running applications.
1Check the environment of your PC.
•Operating environment of “PHOTOfunSTUDIO 9.2 PE ”–OS:
WindowsR XP (32bit) SP3,
Windows VistaR (32bit) SP2,
WindowsR 7 (32bit/64bit) or SP1,
WindowsR 8 (32bit/64bit)
–CPU:
PentiumR III 500 MHz or higher (WindowsR XP),
PentiumR III 800 MHz or higher (Windows VistaR),
PentiumR III 1 GHz or higher (WindowsR 7/WindowsR 8)
–Display:
1024k768 pixels...