Panasonic G6 Manual

251
Wi-Fi/NFC
Using the NFC “ Near Field Communication” function, you can easily transfer data 
necessary for a Wi-Fi connection between  this camera and the smartphone/tablet.
1Launch “ Image App ” on your smartphone/tablet.
•The screen for selecting the connection destination is displayed after the launch.
2While  [ ]  is displayed on the connection screen of the “ Image App ”, touch 
the smartphone/tablet to  [ ] of this unit.
•
It may take time to complete the connection.•When the smartphone/tablet...

252
Wi-Fi/NFC
•You can register up to 20 smartphones/tablets. When the number exceeds 20, registrations will 
be deleted, starting from the oldest touched one.
•Performing [Reset Wi-Fi Settings] will de lete the smartphone/tablet registration. 
•If the camera is not recognized even when touching the smartphone/tablet, change positions 
and try again.
•Do not touch the smartphone/tablet to this camera strongly.
•For information on the operation and settings of NFC-compatible smartphones/tablets, refer to...

253
Wi-Fi/NFC
1Connect to a smartphone/tablet. (P249)
2Select [ ] on the smartphone/tablet.
•
The recorded images are saved in the camera.
•Motion pictures can also be recorded.•Some settings are not available.•When this unit is in Panorama Shot Mode, remote recording 
cannot be performed.
•The screen differs  depending on the operatin g system.
1Connect to a smartphone/tablet. (P249)
2Select [ ] on the smartphone/tablet.
3Drag an image to save it.
•If an image is touched, the picture will be played back...

254
Wi-Fi/NFC
Using the NFC function, you can transfer images in the camera to a smartphone/tablet.
An image can be sent on site immediately after taking it, so you can easily send it to the 
smartphone/tablet
¢ of your family or friend.¢ Installing the “ Image App ” is required for use.
1Play back the picture you want to transfer to the smartphone/tablet in the 
camera.
2Launch “ Image App ” on the smartphone/tablet at the transfer destination.
•The screen for selecting the connection destination is...

255
Wi-Fi/NFC
1Connect to a smartphone/tablet. (P249)
2Select [ ] on the smartphone/tablet.
3Drag an image to send it to an SNS, etc.
•The image is sent to a web service such as an SNS.•The function can be assigned to the top, bottom, left or 
right according to your preference.
You can acquire location information from a smartphone/tablet, and write it on images 
afterwards. Refer to P226 for how to write the location information on the images recorded 
by this unit.
•
Read the [Help] in the “ Image App...

256
Wi-Fi/NFC
∫Methods for sending and images that can be sent
•
Some images may not be played back or sent depending on the device.•For information on the playback of images, check the operating instructions of the destination 
device.
•For details on how to send images, refer to  P286.
Click the followings to jump to the beginning of each menu.
•
When sending images on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
Sending images to a...

257
Wi-Fi/NFC
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P280)
3Select a device you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.]. (P287)
4Take pictures.
•The pictures are sent automatically after taking them.
•To change the setting or disconnect, press [Wi-Fi].  (P245)
You cannot change the settings while sending pictures. Wait until sending is complete.
Sending an image each time a recording is made ([Send...

258
Wi-Fi/NFC
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P280)
3Select a device you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.]. (P287)
4Select [Single Select] or [Multi Select].
•To change the setting or disconnect, press [Wi-Fi].  (P245)
Sending selected images ([Send Images Stored in the Camera])
[Wi-Fi] >
[New Connection]>[Send Images Stored in the Camera]>[Smartphone]
On your smartphone/tablet
When...

259
Wi-Fi/NFC
Displaying pictures on a TV
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P280)
3Select a device you want to connect.
•When the connection is established, the screen is displayed.
4Take or play back pictures on this unit.
•To change the setting or disconnect, press [Wi-Fi]. (P245)
•When a TV is connected to this unit, the TV screen may temporarily return to the status before 
the connection. Pictures are displayed again when you take or play back pictures.
•[Effect] and...

260
Wi-Fi/NFC
When sending images to Printer
∫Methods for sending and images that can be sent
•
Some images may not be sent depending on the device.•For details on how to send images, refer to  P286.
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P280)
3Select a printer you want to connect.4Select pictures, and then print.
•The procedure for selecting picures is the same as the one for when the USB connection 
cable is connected. For details, refer to  P306.
•To change the setting or...