Panasonic Full HD LCD Display TH 42AF1 Operating Instructions

81
Periodic time
Deactivated. Operating time
Screensaver
Start
Mode Interval
Periodic time
Operating time 0:00
0:00
FRIDAY2016/01/01
10:00
Note
●	 It is not possible to set the duration of [Operating 
time] longer than that of [Periodic time ].
To set start and finish time of Screensaver
 Select  [Time designation ] in [Mode].
 Set  [Start time] and [Finish time].
●	 Press 
  once to change the time by 1 minute. 
Keep pressing down to change the time by 15 
minutes.
●	 In [ENGLISH(US)] OSD language,...

82
 
■[Power management mode]: [On]
The following fixed values are set to the menu of 
power consumption reduction. Individual setting is not 
available.
[No signal power off ]: [Enable]
[HDMI1 power management]: [On]
[HDMI2 power management]: [On]
[DVI-D power management]: [On]
[PC power management]: [On]
[Power save]: [On]
 
■[Power management mode]: [Custom]
The menu of the power consumption reduction is 
individually set. This setting is enabled when [ Power 
management mode ] is set to [Custom].
[No...

83
OpenPort PLATFORM standby
This switches the operation status of the OpenPort 
PLATFORM system in standby mode.
For TH-55AF1W, TH-49AF1W and TH-42AF1W
[Off]:
When the power is turned off with remote control, 
etc.
Shuts down the OpenPort PLATFORM system.
When it is in standby condition (Power Indicator: 
Red)
It is possible to startup with remote control or RS-232C, 
but it is not possible to startup with timer setting, wired 
LAN or wireless LAN.
[On] (Factory default):
When the power is turned off...

84
Multi display settings
1 to 10 displays can be aligned in horizontal direction 
and vertical direction respectively, and those displays 
are regarded as one group. The enlarged image is 
shown on the combined display.[Multi display settings ]- submenu screen
 
Multi display settings
Multi display setting Horizontal scale
Bezel H adjustment Vertical scale
Bezel V adjustment
Location Off
2
2
A1
Note
●	 The settings are memorised separately for each 
input terminal.
●	 When the multi display is set to...

85
Set up timer
Sets the program to turn the power on/off or switch video 
inputs at the specified time. Up to 20 programmes can 
be set.
Note
●	 Set [Date & time] in OpenPort PLATFORM before 
setting [Set up timer]. (see page 59)
●	 This can be set only when the date is 2016/01/01 and 
after.
●	 When multiple programs are set at the same time, 
the program with the smallest program number is 
enabled.
●	 To set programme to turn the power on/off, set 
[OpenPort PLATFORM standby] to [ On]. (see page...

86
2Select the numeric button with   
and set the function to assign with 
 
.
 
■Functions assignable to the numeric 
buttons
[Input ] (Direct input select)
Input can be selected with single-touch operation.
[OpenPort PLATFORM] / [ HDMI1] / [HDMI2] /  
[DVI-D] / [ PC] / [COMPONENT] *
 / [ VIDEO] / 
[USB]
*:   [COMPONENT] may be displayed as [RGB]  depending on the settings of [ Component/RGB-
in select]. (see page 78)
●	 Button  already has functions to select the 
OpenPort PLATFORM input with...

87
2Press  to switch function 
group.
Example: Memory load
1. 
2. 
3. 
4. 
5. 
6. MEMORY 1
MEMORY 2
MEMORY 3
MEMORY 4
MEMORY 5
----
Memory load
When using 
OpenPort PLATFORM input, number 6 
will be [KEYBOARD].
3Press  - .
The function for the pressed button starts to operate.
Example: When  is pressed.
Memory load
Load from “MEMORY 2”Ok Cancel
Display orientation
Sets the on-screen display orientation in the portrait 
setting.
[Landscape]:On-screen display angle is for horizontal 
installation....

88
Options Adjustments
This unit offers special functions conveniently used 
according to the installation location and application.
1Press .
[Setup] menu screen will be displayed.
2Select [OSD language] with   
and press  for more than 3 
seconds.
Following screen will be displayed.
Options
Display serial number
USB data cloning
Software licenses
Shipping
OpenPort PLATFORM Shutdown
3Select [Options ] with   and press 
.
[Options] menu screen will be displayed.
1/3
0 0Options Input search...

89
Note
●	 The inputs set to [(Skip)] in [Input label ] (see page 
81) are skipped when searching.
●	 When Y/G/ VIDEO terminal is used as  VIDEO 
input, set [COMPONENT] *
 to [ (Skip)].
*:   [COMPONENT] may be displayed as [RGB] 
depending on the settings of [ Component/RGB-in 
select]. (see page 78)
[Custom]:
Repeatedly searches [ Current input], [1st search 
input] and [2nd search input ] in order, and switches 
to an input with a signal.
PC
Searching...
[Searching...] is displayed during the input...

90
[Secondary backup input]
Sets the second priority backup input.
(None) / [ OpenPort PLATFORM] / [ HDMI1] / 
[HDMI2] / [DVI-D]
The input that is of the same type as the one in use 
for viewing will be greyed out. 
[Auto switch back mode ]
Sets whether or not to automatically return to the 
former (main) input when the former input video 
initially viewed is restored while viewing the video 
of the backup input enabled by the operation of the 
Backup Input function.
[Disable]: Unreturned
[Enable]:...