Panasonic Full HD LCD Display TH 42AF1 Operating Instructions
Here you can view all the pages of manual Panasonic Full HD LCD Display TH 42AF1 Operating Instructions. The Panasonic manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 31
31
Micro-USB terminal connection
By connecting the unit to the PC using the Micro-USB
cable, data in the storage of the OpenPort PLATFORM
system can be read or written from the PC.
Micro-USB
Micro-USB cable (commercially available)
PC
Pin assignments and signal names for Micro-USB
Terminal
3
45 21
Pin No. Signal Name
+5 V DCD ATAD ATAIDGND (Ground)
The Micro-USB terminal is capable of supplying power
of up to 5V/500mA to an external device when the
picture is displayed or it is in standby...
Page 32
32 Note ● Even if the display unit is turned off with the power indicator off, some of the circuits are in power-on status. ● When the power indicator is orange, power consumption during standby/sleep is generally larger than that of when the power indicator is red. ● When the power indicator is changing from green showing the picture is displayed to red or off, while the OpenPort PLATFORM system is shutting down, the indicator temporarily illuminates in orange. In this status, the remote...
Page 33
![Page 33
33
INPUT
MENU
ENTER
8
8
8
Unit
55-inch model
49-inch model
42-inch model
1 External Input Terminal
Connects to video equipment, PC, etc. (see page 19)
2
Turns the power On / Off.
3 Selects the connected device. (see page 37)
● In OpenPort PLATFORM operation mode
[EXIT]: Exits OpenPort PLATFORM operation
mode and returns to the operation of the
inputs other than OpenPort PLATFORM.
(see page 42)
4 Displays the menu screen. (see page 66)
● With OpenPort PLATFORM input
Switches to OpenPort...](http://img.usermanuals.tech/thumb/58/75243/w300_TH-42AF1_en_om_d-32.png "Page 33
33
INPUT
MENU
ENTER
8
8
8
Unit
55-inch model
49-inch model
42-inch model
1 External Input Terminal
Connects to video equipment, PC, etc. (see page 19)
2
Turns the power On / Off.
3 Selects the connected device. (see page 37)
● In OpenPort PLATFORM operation mode
[EXIT]: Exits OpenPort PLATFORM operation
mode and returns to the operation of the
inputs other than OpenPort PLATFORM.
(see page 42)
4 Displays the menu screen. (see page 66)
● With OpenPort PLATFORM input
Switches to OpenPort...")
33 INPUT MENU ENTER 8 8 8 Unit 55-inch model 49-inch model 42-inch model 1 External Input Terminal Connects to video equipment, PC, etc. (see page 19) 2 Turns the power On / Off. 3 Selects the connected device. (see page 37) ● In OpenPort PLATFORM operation mode [EXIT]: Exits OpenPort PLATFORM operation mode and returns to the operation of the inputs other than OpenPort PLATFORM. (see page 42) 4 Displays the menu screen. (see page 66) ● With OpenPort PLATFORM input Switches to OpenPort...
Page 34
![Page 34
34
12 PICTURE
(see page 71)
13 SOUND
(see page 70)
14 RECALL
● Displays the current setting status of Input mode,
Aspect mode, etc. (see page 38)
15 RETURN/BACK
● Used to return to the previous menu. (see page 66)
● With OpenPort PLATFORM input
Returns to the previous screen. (see page 41)
16 FUNCTION
● Displays [Function button guide ].
(see page 86)
17 OFF TIMER
● Switches to stand-by after a fixed period. (see
page 39)
18 Numeric buttons (1 - 6) / KEYBOARD
● Used as shortcut buttons...](http://img.usermanuals.tech/thumb/58/75243/w300_TH-42AF1_en_om_d-33.png "Page 34
34
12 PICTURE
(see page 71)
13 SOUND
(see page 70)
14 RECALL
● Displays the current setting status of Input mode,
Aspect mode, etc. (see page 38)
15 RETURN/BACK
● Used to return to the previous menu. (see page 66)
● With OpenPort PLATFORM input
Returns to the previous screen. (see page 41)
16 FUNCTION
● Displays [Function button guide ].
(see page 86)
17 OFF TIMER
● Switches to stand-by after a fixed period. (see
page 39)
18 Numeric buttons (1 - 6) / KEYBOARD
● Used as shortcut buttons...")
34 12 PICTURE (see page 71) 13 SOUND (see page 70) 14 RECALL ● Displays the current setting status of Input mode, Aspect mode, etc. (see page 38) 15 RETURN/BACK ● Used to return to the previous menu. (see page 66) ● With OpenPort PLATFORM input Returns to the previous screen. (see page 41) 16 FUNCTION ● Displays [Function button guide ]. (see page 86) 17 OFF TIMER ● Switches to stand-by after a fixed period. (see page 39) 18 Numeric buttons (1 - 6) / KEYBOARD ● Used as shortcut buttons...
Page 35
35 Basic Controls Remote Control Sensor / Power Indicator Main Power On / Off button (Back of the unit) AC socket outlet AC cord (supplied) Operate pointing the remote control directly at the unit’s Remote Control Sensor. Note ● For normal use, pull out the remote control sensor from the edge side of the main unit by operating the lever on the rear panel. (see page 32) ● Do not put an obstacle between the remote control sensor of the main unit and the remote control. ● Operate the remote control...
Page 36
![Page 36
36
■When the Unit is turned on for the first time
Following screen will be displayed.
1Select the language with and
press .
English (UK)
Deutsch
Français Italiano
Español
ENGLISH (US)
Русский
OSD language
2For vertical installation, select
[Portrait] with
and press
.
Display orientation
LandscapePortrait
Note
● Once the items are set, the screens won’t be
displayed when switching on the unit next time.
After the setting, the items can be changed in the
following menus.
[OSD language ] (see...](http://img.usermanuals.tech/thumb/58/75243/w300_TH-42AF1_en_om_d-35.png "Page 36
36
■When the Unit is turned on for the first time
Following screen will be displayed.
1Select the language with and
press .
English (UK)
Deutsch
Français Italiano
Español
ENGLISH (US)
Русский
OSD language
2For vertical installation, select
[Portrait] with
and press
.
Display orientation
LandscapePortrait
Note
● Once the items are set, the screens won’t be
displayed when switching on the unit next time.
After the setting, the items can be changed in the
following menus.
[OSD language ] (see...")
36 ■When the Unit is turned on for the first time Following screen will be displayed. 1Select the language with and press . English (UK) Deutsch Français Italiano Español ENGLISH (US) Русский OSD language 2For vertical installation, select [Portrait] with and press . Display orientation LandscapePortrait Note ● Once the items are set, the screens won’t be displayed when switching on the unit next time. After the setting, the items can be changed in the following menus. [OSD language ] (see...
Page 37
![Page 37
37
■Power ON message
The following message may be displayed when turning
the unit power ON:
No activity power off Precautions
‘No activity power off’ is enabled.
When [No activity power off] in the [Setup] menu is set to
[Enable ], a warning message is displayed every time the
power is turned ON. (see page 83)
Note
● [No activity power off] is not activated with OpenPort
PLATFORM input. The message [ ‘No activity power
off’ is enabled. ] is not displayed, either.
● The message [Last turn off...](http://img.usermanuals.tech/thumb/58/75243/w300_TH-42AF1_en_om_d-36.png "Page 37
37
■Power ON message
The following message may be displayed when turning
the unit power ON:
No activity power off Precautions
‘No activity power off’ is enabled.
When [No activity power off] in the [Setup] menu is set to
[Enable ], a warning message is displayed every time the
power is turned ON. (see page 83)
Note
● [No activity power off] is not activated with OpenPort
PLATFORM input. The message [ ‘No activity power
off’ is enabled. ] is not displayed, either.
● The message [Last turn off...")
37 ■Power ON message The following message may be displayed when turning the unit power ON: No activity power off Precautions ‘No activity power off’ is enabled. When [No activity power off] in the [Setup] menu is set to [Enable ], a warning message is displayed every time the power is turned ON. (see page 83) Note ● [No activity power off] is not activated with OpenPort PLATFORM input. The message [ ‘No activity power off’ is enabled. ] is not displayed, either. ● The message [Last turn off...
Page 38
![Page 38
38
Volume Adjustment
Press or to
adjust volume.
INPUT
MENU
ENTER
Unit
20Volume (SPEAKERS)
● The current sound volume level is memorised even if
the power is turned off.
● When [Maximum VOL level] is set to [ On], the volume
can only be adjusted to the maximum point you set,
and the displayed value turns red when it reached its
maximum. (see page 93)
● When [Initial VOL level] is set to [ On], the volume will
be at the set level when the display is turned on. (see
page 92)
Sound mute On /...](http://img.usermanuals.tech/thumb/58/75243/w300_TH-42AF1_en_om_d-37.png "Page 38
38
Volume Adjustment
Press or to
adjust volume.
INPUT
MENU
ENTER
Unit
20Volume (SPEAKERS)
● The current sound volume level is memorised even if
the power is turned off.
● When [Maximum VOL level] is set to [ On], the volume
can only be adjusted to the maximum point you set,
and the displayed value turns red when it reached its
maximum. (see page 93)
● When [Initial VOL level] is set to [ On], the volume will
be at the set level when the display is turned on. (see
page 92)
Sound mute On /...")
38 Volume Adjustment Press or to adjust volume. INPUT MENU ENTER Unit 20Volume (SPEAKERS) ● The current sound volume level is memorised even if the power is turned off. ● When [Maximum VOL level] is set to [ On], the volume can only be adjusted to the maximum point you set, and the displayed value turns red when it reached its maximum. (see page 93) ● When [Initial VOL level] is set to [ On], the volume will be at the set level when the display is turned on. (see page 92) Sound mute On /...
Page 39
![Page 39
39
OFF TIMER
The Display can be preset to switch to stand-by after a
fixed period. (30 min, 60 min, 90 min)
The setting switches each time is
pressed.
● [0 min] → [ 30 min] → [ 60 min] → [90 min]
→ [0 min] (Cancel)
● When three minutes remain, the remaining time will
flash (Red). After that, it switches to stand-by.
● To see the Off timer remaining time, press
.
The Off timer is cancelled if a power interruption occurs.
When the power is turned on later on, it will be in stand-
by condition....](http://img.usermanuals.tech/thumb/58/75243/w300_TH-42AF1_en_om_d-38.png "Page 39
39
OFF TIMER
The Display can be preset to switch to stand-by after a
fixed period. (30 min, 60 min, 90 min)
The setting switches each time is
pressed.
● [0 min] → [ 30 min] → [ 60 min] → [90 min]
→ [0 min] (Cancel)
● When three minutes remain, the remaining time will
flash (Red). After that, it switches to stand-by.
● To see the Off timer remaining time, press
.
The Off timer is cancelled if a power interruption occurs.
When the power is turned on later on, it will be in stand-
by condition....")
39 OFF TIMER The Display can be preset to switch to stand-by after a fixed period. (30 min, 60 min, 90 min) The setting switches each time is pressed. ● [0 min] → [ 30 min] → [ 60 min] → [90 min] → [0 min] (Cancel) ● When three minutes remain, the remaining time will flash (Red). After that, it switches to stand-by. ● To see the Off timer remaining time, press . The Off timer is cancelled if a power interruption occurs. When the power is turned on later on, it will be in stand- by condition....
Page 40
40 Startup of OpenPort PLATFORM This unit is equipped with the OpenPort PLATFORM system based on Android. Set the input select to OpenPort PLATFORM for using. (see page 37) Startup The startup processing of the OpenPort PLATFORM system is performed when the unit starts up while the power indicator is off (power-off status) or lighting in red (standby status). The startup screen appears while the unit is starting up in the OpenPort PLATFORM input selection status. Note ● Approx. 40 seconds for startup....