Panasonic Free-To-Guest Management Appliance Fma101 Operating Manual

 
 
 
11 
 
 
5. Use the Channel Select drop-down list to select the channel range to configure. Note: Up 
to 100 channels can be configured in the FTG Basic platform, but only 20 channels can be 
viewed or configured at a time. 
6. Select the Go button to display the selected channel range. 
7. Add the FTG channels to the lineup.  
 Select the appropriate tuning type from the Tuning Type drop-down list. 
 Type the analog modulator in the Analog Mod field, if applicable. 
 Type the digital modulator...

 
 
 
12 
 
Refer to the following example of a completed Channel Lineup Configuration screen. 
 
 
 
8. Select the Save Configuration button after all the FTG channels on the page have been 
configured. 
 
 Warning: The Save Configuration button must be selected before configuring 
or editing the channel lineup for a different channel range! If the Save 
Configuration button is not selected before configuring a different page of 
channels, the channel configurations for that page will be lost!   
 
9....

 
 
 
13 
11. Select the Save Configuration button. 
12. Wait for the page to reload. 
13. Select the View Channel Lineup link to return to the Current Channel Lineup screen. 
 
 
 
CONFIGURE THE AUXILIARY INPUT CHANNELS IN THE CHANNEL LINEUP 
 
Complete the following steps to configure the auxiliary input channels in the FMA-101 channel 
lineup. 
 
 Warning: Configuration of the auxiliary input channel is an optional 
contracted service provided by LodgeNet! Hotels interested in this service 
must...

 
 
 
14 
CONNECT THE FMA-101 TO THE HOTEL’S DISTRIBUTION NETWORK 
 
Complete the following steps to connect the FMA-101 to the hotel’s coaxial distribution 
network and Internet connection. 
 
1. Mount a 6ELP-50 or 6MLP-50 low pass filter to the FTG rack. 
2. Connect a coaxial cable from the RF OUT connector on the FMA-101 to the low pass filter. 
3. Terminate the RF IN port on the FMA-101. 
4. Connect a coaxial cable from the low pass filter to an input port on the FTG rack combiner. 
5. Connect an...

 
 
 
15 
FMA-101 TROUBLESHOOTING PROCEDURES 
 
 
TROUBLESHOOT THE FMA-101 
 
The following table contains general FTG Basic issues and solutions related to the FMA-101 
and the FTG Basic platform.  
 
FMA-101 Troubleshooting 
Issue Solution(s) 
The OSD/Call 
letters do not 
display in the 
guest room(s).  If the issue affects all rooms: 
o Verify the FMA-101 is properly configured. 
o Verify the FMA-101 is balanced flat with the rest of the FTG Basic 
platform. 
 If the issue is restricted to a single...

 
 
 
16 
7. Select the OK button. 
8. Select the Reset Channel Lineup link at the bottom of the screen.  
9. Select the Reset Configuration check box. 
10. Select the Save Configuration button. 
11. Wait for the check mark in the Reset Configuration check box to disappear, indicating that 
all channels have been removed from the channel lineup. 
12. Reconfigure the channel lineup.