Panasonic Ew 3153 Instructions Manual

19English0English
	Taking	a	Reading	(continued)
Measurement
The heart mark    
will blink when pulse  is detected during  pressurization.
The pressure cuff 
will be tightened  automatically.
The entire display 
will light for approx.  1 second.
1	 Press	the	On/Off	and	Start	button	on	the	main	
unit.
(1) After the entire display on the wireless display  has been lit, the pressure cuff will be tightened 
automatically.
(

) Pressurization will be performed automatically  and measurements will be...

1EnglishEnglish
	Taking	a	Reading	(continued)
Irregular	pulse	function
If the pulse r
 ate varies by more than ±5% from the average while a 
measurement is being taken, when measurement is completed the 
 mark will be displayed.
The  mark will be lit after approx. 6 seconds of blinking when 
the measurement is completed.
If the 
 mark is lit, please take the measurement again.
In some cases, if the pulse rate fluctuates greatly while a measurement 
is being taken, it may be impossible...

1EnglishEnglish
	Taking	a	Reading	(continued)
Irregular	pulse	function
If the pulse r
 ate varies by more than ±5% from the average while a 
measurement is being taken, when measurement is completed the 
 mark will be displayed.
The  mark will be lit after approx. 6 seconds of blinking when 
the measurement is completed.
If the 
 mark is lit, please take the measurement again.
In some cases, if the pulse rate fluctuates greatly while a measurement 
is being taken, it may be impossible...

3English4English
	Taking	a	Reading	(continued)
To	interrupt	measurements	quickly
Press	the	Quick	air	release	button.
If pressure cuff will not deflate quickly enough 
even if the On/Off and Start button is pressed, 
press and hold the quick air release button on top 
of the unit. The air will be released in 
appro
 ximately 4 seconds.
If	the	pressure	cuff	comes	off:
1	 With	the	belt	and	seam	 downwards, 	slide	the	pressure	
cuff	into	the	main	unit.
Belt
With the belt and seam 
downwards, slide...

3English4English
	Taking	a	Reading	(continued)
To	interrupt	measurements	quickly
Press	the	Quick	air	release	button.
If pressure cuff will not deflate quickly enough 
even if the On/Off and Start button is pressed, 
press and hold the quick air release button on top 
of the unit. The air will be released in 
appro
 ximately 4 seconds.
If	the	pressure	cuff	comes	off:
1	 With	the	belt	and	seam	 downwards, 	slide	the	pressure	
cuff	into	the	main	unit.
Belt
With the belt and seam 
downwards, slide...

5English6English
	Storing	and	Calling	up	Blood	Pressure	Readings	(continued)
Calling	up	readings	from	memory
Readings can be recalled after being saved without having to switch the 
unit on.
(After approx. 
 2 seconds.)
(After approx. 
 2 seconds.)
(After approx. 
 2 seconds.)
1.	 Press	the	user	selection	button	on	the	wireless	 display	to	select	the	desired	user.
To select User 
 … To Step .
To select User  …   Press the user selection button.
2.	 Press	the	Memory/Recall	button. The...

5English6English
	Storing	and	Calling	up	Blood	Pressure	Readings	(continued)
Calling	up	readings	from	memory
Readings can be recalled after being saved without having to switch the 
unit on.
(After approx. 
 2 seconds.)
(After approx. 
 2 seconds.)
(After approx. 
 2 seconds.)
1.	 Press	the	user	selection	button	on	the	wireless	 display	to	select	the	desired	user.
To select User 
 … To Step .
To select User  …   Press the user selection button.
2.	 Press	the	Memory/Recall	button. The...

7English8English
	Comparing	AM	and	PM	Average	Systolic	Blood	Pressure
Average AM and PM systolic blood pressure is displayed in order to allow 
you to compare readings from both time periods.
Use of the AM and PM average systolic blood pressure comparison 
function can aid in the detection of a blood pressure pattern known as 
“early morning surge” in which blood pressure rises rapidly in the morning.
AM/PM comparison can only be done when the date and time have been 
set up.
These can be...

7English8English
	Comparing	AM	and	PM	Average	Systolic	Blood	Pressure
Average AM and PM systolic blood pressure is displayed in order to allow 
you to compare readings from both time periods.
Use of the AM and PM average systolic blood pressure comparison 
function can aid in the detection of a blood pressure pattern known as 
“early morning surge” in which blood pressure rises rapidly in the morning.
AM/PM comparison can only be done when the date and time have been 
set up.
These can be...

9English30English
	Specifications
Power sourceDC 6 V (Main unit: Four AA/LR6 size alkaline 
batteries)
A C 10  V 60 Hz (when using AC adapter)
DC 3  V (Wireless display: Two AA/LR6 size 
alkaline batteries)
Display Digital LCD
Method of measurement Oscillometric system
Measurement range Blood pressure:
  0 mmHg to 80 mmHg
Pulse r
ate: 30 to 160 beats per minute
Accuracy Blood pressure:
  Within ±3 mmHg
Pulse rate: Within ±5%
Operation temperature/
humidity range 10
  °C to 40 °C (50 °F to...