Panasonic Electronic Board Ub 2815c Operating Instructions

Operating Instructions
With Installation Manual
(for qualified service personnel)
Electronic Board
Model No. UB-2815C
UB-2315C
•To assemble this unit, please refer to the Installation manual on page 39 through 47.
•Before operating this unit, please read these instructions completely and keep them carefully for future 
reference.
•This unit is designed for installation by a qualified servicing dealer.
Installation performed by non-authorized individuals could cause safety-related problems with the...

2
Thank you for purchasing the Panasonic Electronic Board.
For optimum performance and safety, please read these instructions carefully.
Q’ty
•Markers (Black, Red, Blue)  .  .  .  .  .  .  .  .  1 each
•Eraser  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1
•Power cord   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1
•Magnets  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2Q’ty
•Software CD-ROM    .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1
•Operating...

3
Note:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Operation of...

4
The UB-2815C / 2315C is an electronic board equipped with a color scanner, allowing posters, graphs, charts etc., 
to be attached with magnets and copied as data or printed onto paper. It is possible to output scanned documents or 
hand-written text/diagrams as follows:
■Storing on a USB Flash Memory Device
Allows scanned documents or hand-written text/diagrams to be stored onto a USB flash memory device.*1
*1Not all USB flash memory devices are compatible with this unit.
■Storing on an SD Memory Card...

5
Before You Start
Using
Help
Installation
For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Part Names and Functions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
•Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Scanning . . . . . . . . . . . . . . . . . . . . . . . . ....

For Your Safety
6
To prevent severe injury and loss of life, read this 
section carefully before using the unit to ensure proper 
and safe operation of your unit.
The following graphic symbols are used in this 
Operating Instructions manual.
Power and Ground Connection
The power source voltage of this unit is 
listed on the nameplate. Only plug the unit 
into an AC outlet with the proper voltage.
If you use a cord with an unspecified current 
rating, the unit or plug may emit smoke or 
become hot to the...

For Your Safety
7
Before You StartStop operation immediately if your unit emits 
smoke, excessive heat, abnormal smell or 
unusual noise. These conditions can cause 
fire or electric shock. Immediately turn the 
unit off and unplug the power cord, and 
contact your dealer for service.
When disconnecting the unit, grasp the plug 
instead of the cord. Pulling on a cord forcibly 
can damage it and cause fire or electric 
shock.
The unit should be used only with the power 
cord that is supplied by the...

For Your Safety
8
Power
When the unit is not used over an extended 
period of time, switch it Off and unplug it. If 
an unused unit is left connected to a power 
source for a long period, degraded insulation 
may cause electric shock, current leakage or 
fire.
Installation and Relocation
Do not position the unit in a location where it 
is unstable.
Do not place the unit in a hot humid or dusty 
environment.
Prolonged exposure to these adverse 
conditions may cause fire or electric shock.
When moving the...

For Your Safety
9
Before You Start
This appliance is supplied with a moulded three pin 
mains plug for your safety and convenience.
A 5 amp. fuse is fitted in this plug. Should the fuse need 
to be replaced please ensure that the replacement fuse 
has a rating of 5 amps. and that it is approved by ASTA 
or BSI to BS1362. Check for the ASTA mark   or the 
BSI mark   on the body of the fuse. If the plug 
contains a removable fuse cover you must ensure that it 
is refitted when the fuse is replaced. If you...

Precautions
10
Precautions
Installation•Do not install the unit where it may be exposed to direct sunlight, near heating equipment, or 
near air-conditioning vents as this may cause discoloration of the whiteboard. 
•Do not install the unit in strong sunlight or strong lighting. Proper copying may become 
impossible.
•Do not install the unit in locations where the temperature may change suddenly as this may 
disable the unit’s ability to make copies.
Whiteboard•Make thick and dark lines inside the...