Panasonic Electric Thermo Pot Nc Hu401 Operating Instructions
Have a look at the manual Panasonic Electric Thermo Pot Nc Hu401 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 Safety PrecautionsPlease observe these precautions fully For safety and in order to prevent property damage and hazards to users and others, please read the following instructions strictly. ■ The signals indicate harm and damage when the product is used wrongly . WARNING ■ The symbols indicate specified items that must be followed. Indicating "it may cause severe injuries and death." CAUTION Indicating "the user may get injured or the product may cause property damage. " This symbol indicates prohibition. This symbol indicates mandatory. WARNING To Prevent Burns This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Do not let the unit fall over . Do not lift, tilt or shake the unit or carry it by the lid. Even when the dispense key is locked, hot water may leak through the dispensing spout and the steam vent, causing burns, if the unit falls over or is tilted. Do not pour in water above the maximum water level indication line. If the appliance is overfilled, boiling water may be ejected. Hot water can spill causing burns. Do not close the lid by force. Hot water can spill causing burns. Do not boil anything other than water . Do not heat tea bags, tea leaves, milk, alcohol or anything other than water which may cause it to spurt out hot liquid or steam and cause burns. The water tube may also get clogged, the inner container may burn or corrode, and the fluoro- resin insulating coating may peel of f. Do not block the steam vent. Hot water can overfl ow causing burns. Do not dump the remaining hot water while the lid is attached. If the lid comes off, hot water may splash causing burns. Do not touch the steam vent. This may cause burns. Take special care to prevent infants from touching the steam vent. Close the lid securely . If the unit topples, hot water may spill out causing burns. Lid opening lever Steam vent Lid Maximum water level Dispensing spout Safety Precautions NC-HU401_301-EN-6.indd 1111/12/08 2:35:37 PM
12 Safety PrecautionsPlease observe these precautions fully WARNING Power Cord Never do anything that might cause damage to the cord, power plug or body plug, such as damage them, modify them, place hot objects near to them, bend them, twist them, stretch them, place heavy objects on them, or bundle them together . If the unit is used when damaged, electrical short circuit or fire may result. ● If the supply cord is damaged, it must be replaced by a special cord available from the manufacturer or its service agent. Do not connect or disconnect the power plug or the body plug with wet hands. This may result in electric shock. Do not allow infants access the body plug. You must pay special attention to prevent infants from putting the body plug into their mouth. This may result in electric shock or injury. Do not place small metal parts near the body plug. This may result in electric shock, electrical short circuit or fire. Make sure the power plug is correctly inserted into the wall outlet. If the plug is inserted improperly it may cause electric shock or generate heat resulting in fire. ● Do not use a damaged plug or a connection in a loose outlet. Clean dust from the power plug or the body plug regularly . A build-up of dust on the plug will attract condensation, which could cause cable damage and the deterioration of insulation resulting in fire. ● Remove the plugs and clean them with a dry cloth. Use a dedicated outlet that matches the power rating of the unit. Heat generated when plugging in multiple appliances into one outlet may result in fire. Power plug* Cord Body plug Power cord *The shape of plug differs according to region. During use Do not immerse the unit in water or splash water over it. ● Do not supply water directly from the tap or place the unit in a sink where the bottom may get wet. ● Do not turn the unit upside down when the bottom is wet. It may cause a short circuit and may result in electric shock. If water overflows from the pot and it enters the electrical parts built into the main unit, it may cause a malfunction. Never disassemble, repair or modify the unit. Any attempt to do so may cause the unit to operate abnormally and may result in fire or injury. ● If in need of repair (except for the replacement parts), please contact an authorized Service Center. Do not use to store ice. Condensation will occur , creating a potential source of electric shock and malfunction. Safety Precautions NC-HU401_301-EN-6.indd 1211/12/08 2:35:38 PM
13 CAUTION To Prevent Burns Do not place the unit on an unstable surface. The appliance may topple over causing burns. Do not open the lid or dispense hot water while boiling. Splashing hot water or steam may cause burns. Do not rotate the unit while dispensing hot water . Splashing hot water may cause burns. Do not touch the hot parts of the unit during use or shortly after use. This may cause burns. When carrying the unit, do not touch the lid opening lever . The lid may open causing burns and other injury . W ait until the unit is cooled down before maintenance. A hot appliance may cause burns. ● When disposing hot water, be careful not to get burned. When opening or closing the lid, keep hands away from the steam. Steam can cause burns. Power Cord Do not use a different cord and do not use this cord with any other device. (Do not use a power cord other than the one designed specifically for the unit.) It may cause a malfunction or fire. When the unit is not in use, unplug the power plug from the wall outlet. Deteriorating insulation may result in electric shock and/or fire. When unplugging the unit, pull by the power plug - not the cord. Electric shock and short circuit may result in fire. During use Do not use the unit on surfaces that can be affected by heat for a long time. The unit may get discolored or break. Do not place near walls or furniture. Steam and heat could damage walls and furniture, causing a change in color and sh ape. Safety Precautions NC-HU401_301-EN-6.indd 1311/12/08 2:35:38 PM
14 Part Names and Handling Instructions Part Names and Handling Instructions Operation panelIf the protective film is still covering the surface of the operation panel, peel it off before using the operation panel. Lid opening lever Steam vent Lid Main unit Handle Container Minimum water level mark Liquid crystal display W indow rim Mesh filter Rotating base (360 degrees) When rotating the pot, do not allow the cord to wind around the unit. Power cord Power plug* Cord Body plug *The shape of plug differs according to region. (Replaceable part)It may have come off from the bottom of the con- tainer . Push it completely into the correct position. (See P.23) Dispensing spout Red ball Water level indicator cannot be seen when water level is above the window rim. NC-HU401_301-EN-6.indd 1411/12/08 2:35:39 PM
15 Preparation before using Boil water in it to clean the thermo pot container and the sections through which the hot water is dispensed. 1 Boil some water.2 Dispense the hot water.3 Empty the container via "DRAIN" mark. How to Remove the Lid 1 Press the depression, open the lid and lift up the knob. 2 Open the lid. How to close : Press down on lid until it clicks. 2 Pull it up diagonally . 1 While pressing the ejector knob. How to set : Insert the lid at an angle. Preparation before using Before you use this pot for the first time 90°C 60°C Time of hot water use Hot water temperature Breakfast Dinner “OFF” “OFF” “OFF” “OFF” “OFF” Economy use Auto save power ( HP.18) ● Control heater per use method. Heat during the period of hot water supply , and automatically cut off heater beyond the period of hot water supply to save the warm-keeping power . ● From the beginning of use, save “the period of hot water supply”. ● Within the first week for use, auto-matically raise water temperature to warm-keeping temperature based on “the period of hot water supply”. One week later , automati- cally heat water according to all of the “period of hot water supply” of the previous week. Lunch Tea time NC-HU401_301-EN-6.indd 1511/12/08 2:35:41 PM
16 How to Use How to Use Pour in water with another container! Boilingwater Dispense Press key to make the indicator light flash. Press one time while water is being boiled, and press twice while water is being kept warm. Extends the boiling time by about 6 minutes to reduce the chlorine in the water by about 80%. ● Press key again to boil. Long Boil: To reduce the chlorine in the water w Minimum water level Fill the water higher than the minimum water level. w MAX. WATER LEVEL Do not fill above maximum water level. There may be a case where boiling does not start automatically. Reboil: Or keeping water warm Press one time and it will light up. Connect the power plug after filling with water and close the lid. (1 → 2) Boiling waterDispense Press NC-HU401_301-EN-6.indd 1611/12/08 2:35:42 PM
17 Boilingwater Dispense How to Use When the unit is not in use Starts boiling automatically. Notifies when boiled.Fall in temperature()Automatically switches to 190 keep-warm Unplug, and remove the lid. Pour out any remaining hot water slowly via the mark. Lid release part Operation panel Cautions ● Do not pour out water too quickly. If water is splashed over lid release section or o peration panel, it may cause a malfunction.● Do not leave water standing in the container. It may cause the container to corrode or smell. Connect the power plug after filling with water and close the lid. (1 → 2) beep beep beep beep Light on Charging battery indicator (for cordless dispensing) Light off Light on Water temperature indicator When changing the setting of keep warm temperature (☞ P. 19) When adjusting the temperature suitable for tea (☞P. 19) PressPress to Pour Dispensing speed of hot water varies depending on degree of pressing and dispensing time. Light on Automatically locked in 10 seconds after dispensing is fi nished. Charging battery indicator. (for cord- l ess dispensing) Guideline for dispensing volume Battery charge volumeDispensing volume Approx. 3L or more (4.0L type) Almost full volume (3.0L types) w 1 1.5L or less Dispensing period (Amount of time to press continuously) Less than 5 secondsFrom 5 to 12 secondsMore than 12 seconds Press slightly Press strongly * Be careful of hot water splashing if pressed too strongly With cordless dispensing, and before the water boils, there are only two speeds *1 Full water volume may not be indicated if dispensed frequently . ● Indication lights off and cannot dispense hot water after 8-10 hours even if not dispensed. W ater temperature falls about 194°F(90°C) in 3 hours after boiling. (3.0L type) at room temperature 68°F(20°C) * Temperature falls quicker if water volume is less. Press NC-HU401_301-EN-6.indd 1711/12/08 2:35:45 PM
18 Convenient use methods ● The keep-warm temperature or the timer can be set while the water is being boiled or being kept warm. ● After power is restored in the event of a power and display failure, the keep-warm temperature will be automatically set to 190, even if the timer or the "208" or "180" keep- warm function was previously selected. Notice Convenient use methods Keep-warm Function ● It is ideal to use 180 keep-warm for making green tea. ● Energy can be saved if keep-warm temperature is lower. ● Approx. 176°F(80°C) of water is the most suitable for natural leaf tea. When the unit will not be used for a short time, such as when you go out for a day... Setting the timer ● While setting the timer, the electrifi- cation of heater stops. Reboil ● It is ideal to use boiling water for making coffee / green tea / instant cup noodles etc. Time required for the reboil procedureFrom 208 keep-warm : approx. 4-5 min. From 190 keep-warm : approx. 6-7 min. From 180 keep-warm : approx. 8.5-1 1 min. Amount of water: Maximum Room temperature: 68°F(20ºC) Press the key to reboil water that is being kept warm. After a few minutes, water will be boiled. ● The keep-warm temperature setting is left unchanged. Save Energy Setting ● Power is saved automatically by only boiling during dispensing hours and cutting the heater at all other times. ● This is recommended If dispense time is regularly fixed. Make the water optimal for tea. (Healthy tea mode)Press Long Boil/Reboil: Light on Notice Setting is erased when water is added while lights on.( lights off) Setting will be erased when , and tea buttons are pressed while blinks. TimerEnergy Saving NC-HU401_301-EN-6.indd 1811/12/08 2:35:47 PM
19 Convenient use methods Save Energy Setting ● Power is saved automatically by only boiling during dispensing hours and cutting the heater at all other times. ● This is recommended If dispense time is regularly fixed. When the water will be boiled 8 hours later Remaining time will be indicated on 1 hour basis. To cancel the timer press the key again 8 hours later, timer will go off and water starts boiling When the water is brought up to boiling temperature, keep-warm at the settled temperature. If set up “Energy saving” Boiling started before dispensing time and kept at preset temperature. “OFF” is displayed when not dispensed. “OFF” lights off. While Energy saving is set, boiling starts automatically at dispensing time. Circuit breaker may be tripped if used together with other equipment in a same line. Time required to reach the settled keep-warm temperature 190→ 180 keep-warm : approx. 2-4 hour208→ 190 keep-warm : approx. 0.5-2.5 hour Amount of water: Maximum Room temperature: 68°F(20°C) Previous keep-warm setting: 190 After a short time, water will be kept warm at approx. 176°F(80°C) PressFor notification when boiled (Setting of keep warm temperature does not vary .) beep beep beep beep Long Boil/Reboil: Light on Blink Light on VIP Keep-warm Notice Setting is erased when water is added while lights on.( lights off) Setting will be erased when , and tea buttons are pressed while blinks. Caution A lot of steam may occasionally be released Caution Time for boiling After filled water : approx. 32 - 38 min. From 208 keep warm : approx. 13 - 14 min. F rom 19 0 keep warm : approx. 16.5 - 17.5 min. F rom 18 0 keep warm : approx. 18.5 - 20.5 min. Amount of water: Maximum Room temperature: 68°F(20°C) Keep-warm FunctionReboilHealthy Tea NC-HU401_301-EN-6.indd 1911/12/08 2:35:51 PM
20 Care & Cleaning Care & Cleaning Cautions Before cleaning, be sure to disconnect the plug from outlet, dispense water and allow the unit to cool . Main unit and lid ● Do not wet or soak the main unit in water. If water enters the main unit from the bottom or from the dispensing spout, it can get into the electrical components in the main unit and may cause a malfunction. ● Do not use detergents. ● Do not use benzine or thinner. (They may leave an odor.) (They may damage the surface.) Clean with a damp, well-wrung cloth. Inner container ● Do not use abrasives such as polishing powder, a scrub brush or a nylon brush. They may damage the fluororesin finish of the inner container. Clean with a wet sponge. Clean the inner container using citric acid. (See P.21) About "Scale" While you are using this unit, minerals contained in the water (like calcium) can get stuck on the inner container or on the mesh filter . This is called "scale", and it is harmless. ● Milky-white gritty surface (caused by calcium)● White or glittering floating material (crystals of minerals) ● Discoloration in the finish like dark brown, gray, or green areas (metallic ion formed on the fluororesin covering) This is not discoloration or corrosion of the inner container itself, nor is it fl akes from the fluororesin covering. Mesh filter When filter is clogged, water does not flow smoothly. * After cleaning the filter, be sure to reattach it to the inner container . Clean the filter with a brush. Before storing the unit ● Dry it thoroughly.● Put it into a plastic bag and seal the bag. Daily MaintenanceClean with Citric Acid NC-HU401_301-EN-6.indd 2011/12/08 2:35:55 PM