Panasonic Dvd Vhs Home Theater Sound System Sc Ht830 Operating Instructions

							31
RQT7921
You can watch and listen to other content when the unit is in timer 
recording standby or during VHS recording.
∫Television (l12)
1 During recording
Press [TV] to put the remote control in TV mode.
2 Press [TV/VIDEO] then select the channel with the numbered 
buttons, [WCH] or [XCH].
∫DVD (l16)
1 During recording
Press [DVD] to put the remote control in DVD mode.
2 Press [DVD/VHS] to select “DVD/CD”.
3 Insert a disc and start play.
∫Radio (l40)
1 During recording
Press [TUNER] to put the remote control in TUNER mode.
2 Press [FM/AM] to select the radio band.
3 Select the radio channel with the numbered buttons, [WCH] or 
[XCH].
[Note]
When you want to operate the VHS section again, be sure to press 
[VHS] to put the remote control in VHS mode.You can record from other video equipment. (video cassette recorder, 
camera, etc.)
Preparation
≥Connect the equipment to this unit’s input terminals.
– Turn the unit off before making connections.
– If audio output on the other equipment is monaural, use a stereo-
monaural conversion cable (not included).
≥Insert the tape, ensuring its tab is in place and find the place to start 
recording.
1Press [WCH] or [XCH] to select “AV” 
channel.
2Press [1] (play) to find the place to 
start recording.
3Press [;], then press [SHIFT]i[¥REC] 
to put the unit in recording standby 
mode.
4Press [SPEED] to select the tape speed.
SP>EP>VP
^"""""""b 
5Start play on the other equipment.
6Press [;] when you want to start 
recording.
To stop
Press [∫].
∫To make a timer program to record from other 
equipment (l
32)
Using another source while recordingRecording from other equipment
RF IN
RF OUTLOOPEXT
75
AM
ANTFM
ANT
LOOPANT
GNDA
DIGITAL 
TRANSMITTER
DVD/VHSEXT
DVD
L
R
COMPONENT
VIDEO OUT
YPB/ 
CBPR/ 
CR
S-VIDEO
OUTINOUT
VIDEO
TO 
SB-WA830
Audio/video cable
(not included)To video and audio 
out terminalsOther equipment (play)
[Remember] Press [VHS] first.
RQT7921-P_ENG.book  31 ページ  ２００５年５月２５日　水曜日　午後３時２４分 
						

							32
RQT7921
Timer recording
You can create up to 16 timer recording programs. You can set the 
timer to record an individual program up to a month in advance, record 
at the same time on the same day every week, or at the same time 
daily.
Preparation
≥Make sure the unit’s clock is correct (l36 to adjust it if necessary).
≥Insert a tape, ensuring its tab is in place (l3).
1While stopped, press [PROG].
The timer-programming screen appears.
2Press [PROG] to select an available line 
and press [ENTER].
3Select “DATE” with [21] and change 
it with [34].
The date changes as follows:
A.Current date 
l;: 
lNext day up to one month later minus one day 
l;:
lWeekly timer: SU–SA > MO–SA > MO–FR 
l;:
a.Daily timer: SU > MO > TU > WE > TH > FR > SA 
4Select “CH” with [21] and change it 
with [34].
Select “AV” when recording from other equipment (l31).
5Select “ON” with [21] and change the 
start time with [34].
6Select “OFF” with [21] and change 
the end time with [34].
7Press [SPEED] to change the tape 
speed.
SP>EP>VP>A§
^"""""""-""b §Auto SP/EP change function (l33)
8If the Jet Navigator is on (l34),
Select a category.
Press [1] (cursor) to select a category column. Press [34] to 
enter the category selection menu. Then select a category with 
[3421], and confirm with [MENU].
You can also set and change the category in the navigator list 
(l35).
Repeat steps 2 to 8 to make further timer programs.
9Press [ ] to put the unit on timer 
recording standby.
“ ” lights on the unit’s display.
10Press [Í] to switch the unit to standby.
The timer recording works whether the unit is on or not, so you 
can play DVDs or listen to the radio (l31). Switch the unit to 
standby if you are finished.
To cancel the selected line
Press [SHIFT]i[RESET].
To release the unit from timer recording standby
Press [ ].
To stop recording
Press [ ].
Timer recording
RESET
VOLUME
123
4
56
78
0
DISC
9
CH
NAVI
CANCEL SPEED PROG
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
STATUS/
FUNCTIONS
TVFM/AM DVD/VHS
DV D T V
VHSTUNER
PICTURE MODE
SETUP
OPEN/CLOSE/EJECTJET REW
ENTER
PLAY 
LIST
TV VOL
TV VOLMULTI RE-MASTER QUICK OSDMIX 2CH 
ZOOMPROGRESSIVE 
CD MODEREPEAT
PLAY MODE
H.BASSSUBWOOFER LEVELC.FOCUS 
SFCTESTSUPER SRNDCH SELECTMUTING
CM SKIPADVANCE
DISC REVIEW
QUICK 
REPLAYREC
SLEEP
   PLAUDIORESET
TV/VIDEOSHIFT SHIFT
INPUT SELECTOR
PROG
SHIFT SPEEDVHS
MENU
CANCEL
ENTER
S10
PROG
PROG. :ENTER  END:MENU
DATE CH ON  OFF 1 / 2
27WE 2 8:02PM 9:30PMSP
SU–
SA 125 10:30AM 11:00AMA
SU 14 3:00PM 4:00PMEP
19TU 5 10:15PM 11:30PMVP
28TH AV 8:02PM 9:30PMSP
30SA 4 7:10PM 7:55PMVP
– – – – – – –:– –  –:– –
– – – – – – –:– –  –:– –
1
2
3
4
5
6
7
8
RQT7921-P_ENG.book  32 ページ  ２００５年５月２５日　水曜日　午後３時２４分 
						

							33
RQT7921
∫To check a program
Press [PROG].
The timer-programming screen appears.
∫To correct a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to correct and 
press [ENTER].
2 Select the item with [21] and correct it with [34].
∫To cancel a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to cancel.
2 Press [CANCEL].
To clear the timer programming screen
Press [MENU].
The unit switches tape speed to EP if it determines there is not enough 
tape to record the entire program in SP mode. The change may start 
at the beginning of the recording or part way through, depending on 
the remaining tape. 
Before using this function, set the length of the tape you are using 
(l38). It may not work correctly if you use tapes with irregular 
lengths.
[Note]
This function does not guarantee recording of the entire program.
To check, correct, and cancel timer programs
Auto SP/EP change
DATE CH ON  OFF 1 / 2
27WE 2 8:02PM 9:30PMSP
SU-SA 125 10:30AM 11:00AMA
SU 14 3:00PM 4:00PMEP
19TU 5 10:15PM 11:30PMVP
28TH AV 8:02PM 9:30PMSP
30SA 4 7:10PM 7:55PMVP
– – – – – – –:– –  –:– –
– – – – – – –:– –  –:– –
1
2
3
4
5
6
7
8
SELECT: s/r:3421
1st program 
(30 min.)2nd program (60 min.) Example program combination
Example program combination
30 min. at SP15 min. 
at SP45 min. 
at EP(when using a 60-min. 
tape)
[Remember] Press [VHS] first.
RQT7921-P_ENG.book  33 ページ  ２００５年５月２５日　水曜日　午後３時２４分 
						

							34
RQT7921
Convenient functions (Jet Navigator, VISS, On-screen display)
This unit can display a list of the recorded programs on the inserted 
tape on the TV screen. You can then select the desired program, and 
this unit will quickly reach its beginning and start playback.
The unit can save the data for up to 14 recordings on a tape, for 20 
different tapes, and for a total of 50 recordings.
1Press [MENU] to display the “VHS 
MENU” screen.
2Press [34] to select “OPTION” menu 
and press [ENTER].
3Press [34] to select “JET 
NAVIGATOR” and press [21] to 
change the setting to “ON”.
4Press [34] to select “TAPE SELECT” 
and press [21] to set the length of the 
tape you are using.
T120: T30, T60, T90, T120 tapes
T160: T140, T160 tapes
T180: T180 tapes
5Record programs (lpages 30–32). 
The unit makes the list as you record.
To exit the settings screen
Press [MENU] until the screen disappears.
1Press [NAVI] to show the “JET 
NAVIGATOR” screen.
2Press [NAVI] to highlight the program 
you want to watch.
The most recent program is highlighted first. 
Once you have highlighted the program, wait about three seconds. 
The unit then starts searching for the program and starts play.
The channel, date, and time of a recording appear on the television 
when play starts.
To clear the Jet Navigator list
Press [MENU].
∫To delete the Jet Navigator on a video cassette 
tape
Keep [CANCEL] pressed for more than 5 seconds while the Jet 
Navigator list appears. “- -” appears on the list.
∫To delete all the Jet Navigator data stored in the 
unit’s memory (l
38).
Jet Navigator
∫ Saving Jet Navigator data
VOLUME
123
4
56
78
0
DISC
9
CH
NAVI
CANCEL SPEED PROG
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
STATUS/
FUNCTIONS
TVFM/AM DVD/VHS
DV D T V
VHSTUNER
PICTURE MODE
SETUP
OPEN/CLOSE/EJECTJET REW
ENTER
PLAY 
LIST
TV VOL
TV VOLMULTI RE-MASTER QUICK OSDMIX 2CH 
ZOOMPROGRESSIVE 
CD MODEREPEAT
PLAY MODE
H.BASSSUBWOOFER LEVELC.FOCUS 
SFCTESTSUPER SRNDCH SELECTMUTING
CM SKIPADVANCE
DISC REVIEW
QUICK 
REPLAYREC
SLEEP
   PLAUDIORESET
TV/VIDEOSHIFT SHIFT
INPUT SELECTOR
NAVI
VHS
MENU
CANCEL
ENTER
SHIFT
REC
RESET STATUS/ 
FUNCTIONS
S10
OPTION 1/2OSD ON OFF
TAPE  SELECT
  T120 T160 T180
BLUE BACK  ON  OFF
JET  NAVIGATOR  ON  OFF
DELETE   NAVIDATA  NO  YES
JET SEARCH   27    35
 SELECT   :   s  / r:
 E N D         : M E N U21
≥
 ≥
≥ ≥
≥
≥
3 4
∫ Using the Jet Navigator to find 
programsNAVI
 JET NAVIGATOR
     DATE  CH  ON  CATEGORY
 10/18  1 
10:30PM    MUSIC
 10/19  124 3:00PM    SPORT
  10/21 5 10:15AM   - -
 10/23  AV 8:02PM   - -
 10/26  
   4  7:10AM    EDUCA
 10/27   2 8:02AM  - -
 10/27  12 8:30PM  - -1
   SELECT:NAVI ,    END:MENU1
RQT7921-P_ENG.book  34 ページ  ２００５年５月２５日　水曜日　午後３時２４分 
						

							35
RQT7921
Set categories to make it easier to see what kind of programs are in 
the list.
1Press [1] (cursor) while the program 
you want to categorize is highlighted.
2Press [3421] to select a category 
and press [MENU] to confirm and 
return to the previous screen.
To return to the Jet Navigator list
Press [MENU].
[Note]
≥If you have already stored 14 programs on a tape and you then store 
another one, the new item is added and the oldest is deleted.
≥“REMAINING PROGRAM 0 DELETE JET NAVIGATOR DATA” 
appears when you try to store more than fifty programs. The new 
item is added and the oldest item is deleted.
≥“REMAINING CASSETTE 0 FOR JET NAVIGATOR DATA” appears 
when you try to store items for more than 20 tapes. Delete all the Jet 
Navigator data in the unit if you want to save the data for the tape 
(l38).
≥The list does not appear when playing tapes recorded on other 
equipment.
≥Parts of the list data are recorded on the tape. Take care when 
recording over older recordings that you do not overlap it. It is 
recorded within a few minutes either side of the beginning of the 
recording (longer if you used EP or VP).
To demonstrate the Jet navigator function
Keep [NAVI] pressed for more than 5 seconds without inserting a 
cassette tape.
Use the index marks on a tape to find sections to play.
The unit adds index marks when recording starts. To add them 
manually during recording, press [SHIFT]i[¥REC].
While stopped or during play
Press [:] (backward) or [9] (forward) 
to skip to the part you want to play.
≥Up to 20 index signals can be searched for in both directions.
≥You can reduce the number of skips by pressing the opposite button.
≥This feature may not work correctly if the marks are too close 
together. Make recordings of at least 15 minutes (25 minutes in VP 
mode).To see these displays, set the OSD item in the OPTION menu to ON.
Press [STATUS/FUNCTIONS].
The time and operation details appear on the screen for about 5 
seconds.
[Note]
≥These displays do not appear when paused or during slow play.
≥The on-screen display may be disturbed depending on the playback 
tape or the input signal.
Setting categories
CategoryIndicationIconCategoryIndicationIcon
MOVIE MOVIE SPORTS SPORT
MUSIC MUSIC CHILDREN CHILD
DRAMA DRAMA NEWS NEWS
EDUCATION EDUCA OTHERS OTHER
DOCUMEN-
TA R YDOCUM
Finding programs—VHS Index Search 
System (VISS)
[:][9]
Index mark Program Program Programtwice twiceonce once
On-screen display
1Channel display
Displays the cable television channel or television channel 
currently being received.
2STEREO/SAP indication
Indicates when a program is broadcast in stereo or SAP.
(l39)
3L and R indicators
The Left (L) and Right (R) indicators show which sound 
mode is selected as follows:
Stereo: Both the L and R indicators appear.
L: The L indicator appears.
R: The R indicator appears.
Mono: Neither the L and R indicator appears.
4Tape running display
Shows operations taking place.
5Shows the time and tape counter
Press [STATUS/FUNCTIONS].
The display changes as follows:
Present time>Tape counter>Remaining tape time
^""""""""""""""""""b 
Using index search: “S 01” to “S 20” is displayed.
Using jet rewind: “J.REW” is displayed (except when the 
remaining tape time indication appears).
≥Press [SHIFT]i[RESET] to reset the tape counter 
(elapsed time) to “0:00.00”.
≥The remaining time is approximate. It will be incorrect if 
you set the wrong tape time in the TAPE SELECT item in 
the OPTION menu and if the tape is of poor quality.
6Cassette in indicator
Shows whether you have loaded a cassette.
7Tape speed indicator
(l30)
8Picture mode indicator
(l29)
STATUS/
FUNCTIONS
CH 1
STEREO
L R0:00.22
1 SP 1
STANDARD
123 45
6
87
[Remember] Press [VHS] first.
RQT7921-P_ENG.book  35 ページ  ２００５年５月２５日　水曜日　午後３時２４分 
						

							36
RQT7921
Changing settings
≥The settings remain intact even if you switch the unit to standby.Select the language for these menus and other on screen displays.
1Press [34] to select “LANGUAGE” 
and press [ENTER].
2Press [34] to choose the preferred 
language.
≥ENGLISH (Factory preset)
≥ESPAÑOL
≥FRANÇAIS
Press [MENU] to confirm and return to 
the previous screen.
The clock is set automatically after Plug-in Auto Tuning (l11). Do the 
following if you want to set it again or if the time is not set correctly.
1Press [34] to select “CLOCK SET” 
and press [ENTER].
2Press [34] to 
select “AUTO 
CLOCK SET” and 
press [ENTER].
Auto setting starts. This can take some 
time.
To stop partway through
Press [MENU].
∫If the unit cannot set the clock automatically
The MANUAL CLOCK SET screen appears. Set the time manually 
(lbelow).
2Press [34] to 
select “MANUAL 
CLOCK SET” and 
press [ENTER].
3Press [21] to select the item you want 
to change and press [34] to change 
the setting.
≥D.S.T.: Daylight Saving Time
4Press [MENU] to start the clock and exit 
the setting screen.
∫Time reset function
If the clock is less than 2 minutes slow or fast, it can easily be reset to 
the proper time when it is 12:00:00.
1 Display the MANUAL CLOCK SET screen on the TV screen.
2 When the current clock displays on the unit is between 11:58 and 
12:01, press [MENU] as soon as you see 12:00:00. This resets the 
time to 12:00:00.
1Shows VHS MENU.
2Select the item.
3Make the settings.
4Press to exit.
VOLUME
123
4
56
78
0
DISC
9
CH
NAVI
CANCEL SPEED PROG
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
STATUS/
FUNCTIONS
TVFM/AM DVD/VHS
DV D T V
VHSTUNER
PICTURE MODE
SETUP
OPEN/CLOSE/EJECTJET REW
ENTER
PLAY 
LIST
TV VOL
TV VOLMULTI RE-MASTER QUICK OSDMIX 2CH 
ZOOMPROGRESSIVE 
CD MODEREPEAT
PLAY MODE
H.BASSSUBWOOFER LEVELC.FOCUS 
SFCTESTSUPER SRNDCH SELECTMUTING
CM SKIPADVANCE
DISC REVIEW
QUICK 
REPLAYREC
SLEEP
   PLAUDIORESET
TV/VIDEOSHIFT SHIFT
INPUT SELECTOR
VHS
MENU
ENTER
S10
MENU
VHS  MENU
LANGUAGE
CLOCK    SET
CHANNEL  SET
OPTION
SELECT :  , ENTER
END :MENU
34
≥
ENTER
Select
Register
ENTER
Select
Register
MENU
LANGUAGE
CLOCK SET
AUTO CLOCK SET
MANUAL CLOCK SET
LANGUAGE
ENGLISH
ESPAÑOL
FRANÇAIS
SELECT : :
END :MENU
34
≥
AUTO CLOCK SET
AUTO  CLOCK SETTING
IN PROGRESS.
PLEASE  WAIT.
CANCEL:MENU
MANUAL  CLOCK   SET
  Y  M  D    H : M
 2005 1  1 12:00
AM
D. S. T.  :  YES  NO
SELECT : s/r:
S T A R T  : MENU
21
≥
3 4
RQT7921-P_ENG.book  36 ページ  ２００５年５月２５日　水曜日　午後３時２４分 
						

							37
RQT7921
The unit tunes automatically after you plug it in and turn it on for the 
first time (l11, Plug-in Auto Tuning), but you can start the process 
again if necessary.
≥Make sure you have tuned to a television channel. This does not 
work if you have selected “AV” channel.
1While VHS MENU is displayed (l36)
Press [34] to select “CHANNEL SET” 
and press [ENTER].
2Press [34] to select “ANTENNA 
SYSTEM” and press [ENTER].
3Press [34] to select “TV” or “CATV” 
to suit the type of antenna you are 
using. 
Channels are set corresponding to the antenna system you select. 
This is set automatically when you do Plug-in Auto Tuning.
To exit the settings screen
Press [MENU] until the screen disappears.
Auto tuning searches for TV stations and memorizes every tuned 
program position. Other program positions are skipped. (Channel 
range lright)
2Press [34] to select “AUTO” and 
press [ENTER].
Auto tuning starts. It takes three or more minutes to complete.
To stop partway through
Press [MENU].You can manually preset channels that are skipped when using the 
auto channel setting, and manually skip channels that are preset.
2Press [34] to select “MANUAL” and 
press [ENTER].
3Press [34] to select “CH” and [21] 
to select the channel.
4Press [34] to select “BLANK” and 
[21] to select “ON” or “OFF”.
To exit the settings screen
Press [MENU] until the screen disappears.
∫Channel range
≥TV mode
≥CATV mode
CHANNEL SET
ANTENNA SYSTEM
AUTO
ANTENNA  SYSTEM
≥
TV
CATV
SELECT :
END :MENU
34
AUTO  CHANNEL  SET
PROCEEDING
END :MENU2
MANUAL
Band Airwaves
VHF 2–13
UHF 14–69
Band Cable
VHF 2–13
CATV LOW BAND 95–99
CATV MID/SUPER BAND 14–36
CATV HYPER BAND 37–65
ULTRA BAND66–94
100–125
SPECIAL CATV CHANNEL 1
MANUAL CHANNEL SET
 CH
                       B L A N K
SELECT
END :MENU  2
ON OFF
: s/r:
3421 ¥
[Remember] Press [VHS] first.
RQT7921-P_ENG.book  37 ページ  ２００５年５月２５日　水曜日　午後３時２４分 
						

							38
RQT7921
Changing settings
1While VHS MENU is displayed (l36)
Press [34] to select the “OPTION” 
and press [ENTER].
2Press [34] to select the item and 
press [21] to change the setting 
(lbelow).
To exit the settings screen
Press [MENU] until the screen disappears.≥Underlined items are the factory preset.
∫ Items
OSD (l35, On-screen display)
[ON]: Messages appear on the television for about five 
seconds after you perform operations.
[OFF]: Messages do not appear.
TAPE SELECT
Set the length of tape you are using so the unit can show the correct 
remaining time.
[T120
]: T30, T60, T90, T120 tapes
[T160]: T140, T160 tapes
[T180]: T180 tapes
BLUE BACK
[ON]: The screen shows a blue background when you play 
unrecorded portions.
[OFF]
JET NAVIGATOR (l34)
[ON]: Jet Navigator data automatically registered.
[OFF
]: Data not registered.
DELETE NAVIDATA
Delete all the Navigation data registered in the unit.
See page 34 to delete data on a single tape.
[NO
]
[YES]: Then press [ENTER] when you want to delete all the Jet 
navigator data.
JET SEARCH (l28)
Set the speed for JET SEARCH when playing EP and VP tapes.
[a27] [a
35]
≥Select a27 if the picture is poor at a35.
MTS (l39, Changing audio)
Set the MTS (Multi-channel Television Sound Stereo) reception type.
[MAIN
]: To receive stereo broadcasts.
[SAP]: To receive SAP when being broadcast.
[MONO]: To receive monaural broadcasts (e.g., when reception is 
poor).
REMOTE CONTROL (l39)
[1][2]
DISPLAY
Set the brightness of the units display when the unit is in standby 
mode.
[BRIGHT]:The display is bright all the time.
[DIM
]: The display dims when the unit is in standby mode.
[OFF]: The display turns off when the unit is in standby mode.
≥When Demo function is on, the display does not turn off even if 
“OFF” is selected. Select “DEMO OFF” to reduce power 
consumption (l9).
OPTION
VOLUME
123
4
56
78
0
DISC
9
CH
NAVI
CANCEL SPEED PROG
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
STATUS/
FUNCTIONS
TVFM/AM DVD/VHS
DV D T V
VHSTUNER
PICTURE MODE
SETUP
OPEN/CLOSE/EJECTJET REW
ENTER
PLAY 
LIST
TV VOL
TV VOLMULTI RE-MASTER QUICK OSDMIX 2CH 
ZOOMPROGRESSIVE 
CD MODEREPEAT
PLAY MODE
H.BASSSUBWOOFER LEVELC.FOCUS 
SFCTESTSUPER SRNDCH SELECTMUTING
CM SKIPADVANCE
DISC REVIEW
QUICK 
REPLAYREC
SLEEP
   PLAUDIORESET
TV/VIDEOSHIFT SHIFT
INPUT SELECTOR
VHS
MENU
ENTER
SHIFTAUDIO [1], [2]
S10
OPTION 2/2MTS MAIN SAP MONO
REMOTE CONTROL  1  2
DISPLAY  
 BRIGHT DIM OFF
 SELECT  : s/r:
 E N D   :MENU21
≥
≥
≥
3 4
OPTION 1/2OSD ON OFF
TAPE  SELECT
  T120 T160 T180
BLUE BACK  ON  OFF
JET  NAVIGATOR  ON  OFF
DELETE   NAVIDATA  NO  YES
JET SEARCH   27    35
 SELECT   :   s  / r:
 E N D         : M E N U21
≥
 ≥
≥ ≥
≥
≥
3 4
RQT7921-P_ENG.book  38 ページ  ２００５年５月２５日　水曜日　午後３時２４分 
						

							39
RQT7921
Panasonic video cassette recorders use the same remote control 
system so they may respond unintentionally to a command from this 
remote control. Change the code on this unit and its remote control 
(the two must match) if you place another Panasonic video cassette 
recorder close together.
≥Use “1”, the factory preset, under normal circumstances. 
1While OPTION menu is displayed
Press [34] to select the “REMOTE 
CONTROL”.
2Press [21] to select the code (1 or 2) 
and press [MENU].
The remote control code on the unit has been set.
3While pressing [ENTER] on the remote 
control, press and hold the numbered 
button ([1] or [2]) corresponding to the 
code you selected in step 2.
When the remote control code on the remote is set, “REMOTE” 
indication (l below) disappears.
The following is displayed for a few seconds on the main unit when you 
use a remote control with the different code.
The unit’s remote control code
Change its code to match the unit’s (l step 3).When a stereo and/or SAP broadcast is received, “STEREO” and/or 
“SAP” appear showing the type of broadcast.
To change the audio
Press [SHIFT]i[AUDIO].
The audio changes as follows:
≥When playing a tape:
LR>L>R>Monaural audio track
^""""""""-""""b 
≥While watching the television:
LR>L>R
^"""-"b 
The table below shows the TV broadcast type, “MTS” settings, and 
audio recording patterns.
Be sure that “MTS” is set to “MAIN” or “SAP” to record on the Hi-Fi 
audio tracks.
[Note]
≥Switch to “MONO” for viewing or recording if a stereo or SAP 
broadcast is impaired by poor reception.
≥To resume stereophonic recording, set “MTS” to “MAIN” or “SAP”.
When you play back recordings of stereo or SAP broadcasts, these 
audio types are automatically selected. The unit may select a different 
type if you start play midway through the program. Press 
[SHIFT]i[AUDIO] to change the type if this occurs.
This function does not work if:
– The tape was recorded on a deck without this system.
– The tape is a recording from external equipment.
REMOTE CONTROL
Changing audio
TV 
broadcastMTS 
settingAudio track
Normal 
(Mono)Hi-Fi
Left Right
Mono MAIN or 
SAPMono Mono Mono
Stereo MAIN or 
SAPLiR 
(Mixed)Left Right
Mono and 
SAPMAIN Mono Mono Mono
SAP Mono Mono SAP
Stereo and 
SAPMAIN LiR 
(Mixed)Left Right
SAP LiR 
(Mixed)LiR 
(Mixed)SAP
Auto bilingual choice function
SHIFT
CANCELAUDIOr
[Remember] Press [VHS] first.
RQT7921-P_ENG.book  39 ページ  ２００５年５月２５日　水曜日　午後３時２４分 
						

							40
RQT7921
The radio
Press [TUNER] to put the remote control in TUNER mode.
Up to 15 stations can each be set in the FM and AM bands.
1Press [FM/AM] to select “FM”.
2Press [6] or [5] to tune to the 
lowest frequency (“FM 87.9” MHz or 
“FM 87.5” MHz).
3Press and hold [ENTER].
Release the button when “AUTO” is displayed.
The tuner presets all the stations it can receive into the channels 
in ascending order.
≥“SET OK” is displayed when the stations are set. The last 
station to be set is then played.
≥“ERROR” is displayed when automatic presetting is 
unsuccessful. Preset the channels manually (lright).
4Repeat steps 1 to 3 to set the AM bands 
(the lowest frequency is “AM 520” kHz).
1Press [FM/AM] to select “FM” or “AM”.
2Press [6] or [5] to select the 
frequency.
Press and hold [6] or [5] until the frequency starts scrolling 
to start automatic tuning. Tuning stops when a station is found.
1Tune to the station (labove).
2Press [ENTER].
3While “PGM” is blinking on the display
Press the numbered buttons to select a 
channel.
Alternatively, press [WCH] or [XCH] then press [ENTER].
The station occupying a channel is erased if another station is preset 
to that channel.
1Press [FM/AM] to select “FM” or “AM”.
2Press the numbered buttons to select 
the channel.
Alternatively, press [WCH] or [XCH].
To select a 2-digit number
e.g. 12: [S10] l [1] l [2].
When a stereo FM broadcast is being received.
∫If noise is excessive in FM
Press [PLAY MODE] to display “MONO”.
Press [PLAY MODE] again to cancel the 
mode.
The mode is also canceled when you change 
the frequency.
∫FM frequency step
Main unit onlyThe step is factory-set to 0.2 MHz, but you can change it to receive 
broadcasts allocated in 0.1 MHz steps.
1 Press [INPUT SELECTOR]
 on the main unit to select “FM”.
2 Press and hold [INPUT SELECTOR].
After a few seconds the display changes to show the current 
minimum frequency. Continue to hold the button down. The 
minimum frequency changes and the step is changed.
To return to the original step, repeat the above steps.
[Note]
Any FM/AM frequencies preset in channels will be changed by this 
procedure. Preset them again.
Automatic presetting
Manual tuning
OPEN/CLOSEEJECTDISC CHECK/REW FF/STOP PLAYDOWN UPPHONES
VOLUMESTOP-DEMOPLAYH.BASSRECCH
INPUT SELECTOR
VOLUME
123
4
56
78
0
DISC
9
CH
NAVI
CANCEL SPEED PROG
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
STATUS/
FUNCTIONS
TVFM/AM DVD/VHS
DV D T V
VHSTUNER
PICTURE MODE
SETUP
OPEN/CLOSE/EJECTJET REW
ENTER
PLAY 
LIST
TV VOL
TV VOLMULTI RE-MASTER QUICK OSDMIX 2CH 
ZOOMPROGRESSIVE 
CD MODEREPEAT
PLAY MODE
H.BASSSUBWOOFER LEVELC.FOCUS 
SFCTESTSUPER SRNDCH SELECTMUTING
CM SKIPADVANCE
DISC REVIEW
QUICK 
REPLAYREC
SLEEP
   PLAUDIORESET
TV/VIDEOSHIFT SHIFT
INPUT SELECTOR
ENTER
PLAY MODE
FM/AM
TUNER
Numbered
buttonsCH
CH
SHIFT
C. FOCUS
SFCTEST 
SUPER SRND
PL
S10
H.BASSCH SELECT
VOLUME
∫ Presetting the channel one by one
Selecting the preset channels
PGM
STTUNED
MONO
[Remember] Press [TUNER] first.
RQT7921-P_ENG.book  40 ページ  ２００５年５月２５日　水曜日　午後３時２４分