Panasonic Dvd Vhs Home Theater Sound System Sc Ht820v Operating Instructions

							31
RQT7388
See below for details.
Press [SHIFT]i[PICTURE MODE].
Each time you do this:
STANDARD:for recordings of television program (Factory preset)
DYNAMIC:Clear, vivid pictures for scenery and sports
SOFT:for prerecorded tapes
Press and hold [1] (PLAY) for about five 
seconds.
“R1” appears on the television.
At the end of the program, the tape rewinds to the beginning of the 
program and plays it again. (It only works if there is a five-second 
blank at the end of the program.) This repeats until you cancel it.
To cancel
Press [1] (PLAY).
≥It also cancels if you stop, pause, cue, or review.This unit has an automatic digital tracking control feature that usually 
makes tracking adjustments for you, but you may need to do it 
manually, such as if noise appears on a tape recorded on other 
equipment.
During play
Press [WCH] or [XCH].
Repeat until the noise disappears.
To return to automatic digital tracking control
Press [WCH] and [XCH] at the same time.
To remove the noise from a paused picture
Start slow play, then adjust the tracking.
[Note]
This may not be effective on some tapes.
While paused
Press [WCH] or [XCH].
Repeat until the jiggling stops.
To return to the previous condition
Press [WCH] and [XCH] at the same time.
[Note]
This may not work with some televisions. Try adjusting the vertical 
on the television itself.
Picture mode
Changes the picture quality to suit the material you are playing.
Repeat play
Plays a program repeatedly.
Manual tracking
Adjusts the tracking manually.
Vertical locking adjustment
Adjusts the vertical hold to keep the picture from jiggling.
VOLUME
123
456
78
0
100
9
CH
NAVI
CANCEL SPEED PROG
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
OSD/
DISPLAY
TVFM/AM DVD/VHS
DV D T V
VHSTUNER
DISC 1 DISC 2 DISC 3
DISC 4
PICTURE MODE
SETUP
OPEN/CLOSE/EJECTJET REW CD MODE
DISC 5
S10ENTER
PLAY 
LIST
TV VOL
TV VOLRESETTV/VIDEOPA G E
GROUPMIX 2CH
SUBTITLEREPEAT
PLAY MODE
MULTI RE-MASTER
SUBWOOFER LEVELC.S.M
SFCC.FOCUSSUPER SRNDPROGRESSIVEMUTING
POSITION
MEMORY ZOOM
QUICK REPLAYREC
SLEEP
   PLAUDIOTESTCH SELECTSHIFT
INPUT SELECTORSHIFT7
PICTURE MODE
i
CH
CH
Picture mode
Repeat play
STANDARD
0:00.22
R1 SP 1
Manual tracking
Vertical locking adjustment
[Remember] Press [VHS] first.
7388en.book  31 ページ  ２００３年１２月２２日　月曜日　午後９時３９分 
						

							32
RQT7388
Manual recording
Preparation
≥Turn on the television and select the video input for the VHS.
See below for details.
1Insert the tape you want to record to.
Ensure its tab is in place (➜page 5).
2Select the channel with the numbered 
buttons, [WCH] or [XCH].
≥To select with the numbered buttons:
e.g. channel 2: [0] ➜ [2]
channel 23: [2] ➜ [3]
channel 123: [100] ➜ [2] ➜ [3]
3Press [SPEED] to select the tape 
speed.
SP>EP>VP
^-b 
4Press [SHIFT]i[¥REC] to start 
recording.
“REC” lights on the unit’s display.
To stop recording
Press [∫].
To pause recording
Press [;]. 
Press it again or press [SHIFT]i[¥REC] to continue recording.
∫To specify a time to stop recording (➜page 46, 
The sleep timer)
[Note]
≥You cannot change channels while recording. You can change 
channels while paused.
≥The unit will automatically return to the stop mode after a pause of 
5 minutes while recording.
≥Even if the tape you use is labeled “S-VHS”, the recordings you 
make do not use this system.
≥You cannot record from the disc section to the unit.
∫Tape speeds
There are three tape speeds.
SP: You can record the length shown on the tape.
EP: Three times the length of SP mode.
VP: Five times the length of SP mode.
≥You cannot play tapes recorded with VP mode on other equipment.
≥It takes more time for automatic tracking to work when playing 
tapes recorded with VP mode, and it may not work at all with some 
tapes. Do tracking manually if this is the case (➜page 31).
≥This unit can play tapes recorded with LP mode on other 
equipment (“LP” lights on the display).
Recording the television
VOLUME
123
456
78
0
100
9
CH
NAVI
CANCEL SPEED PROG
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
OSD/
DISPLAY
TVFM/AM DVD/VHS
DV D T V
VHSTUNER
DISC 1 DISC 2 DISC 3
DISC 4
PICTURE MODE
SETUP
OPEN/CLOSE/EJECTJET REW CD MODE
DISC 5
S10ENTER
PLAY 
LIST
TV VOL
TV VOLRESETTV/VIDEOPA G E
GROUPMIX 2CH
SUBTITLEREPEAT
PLAY MODE
MULTI RE-MASTER
SUBWOOFER LEVELC.S.M
SFCC.FOCUSSUPER SRNDPROGRESSIVEMUTING
POSITION
MEMORY ZOOM
QUICK REPLAYREC
SLEEP
   PLAUDIOTESTCH SELECTSHIFT
INPUT SELECTOR
SHIFTRECi
Recording the television
SP EPVP
REC
VHS
7388en.book  32 ページ  ２００３年１２月２２日　月曜日　午後９時３９分 
						

							33
RQT7388
You can watch and listen to other content when the unit is in timer 
recording standby or during VHS recording.
∫Television (➜page 16)
1 During recording
Press [TV] to put the remote control in TV mode.
2 Press [TV/VIDEO] then select the channel with the numbered 
buttons, [WCH] or [XCH].
∫DVD (➜page 18)
1 During recording
Press [DVD] to put the remote control in DVD mode.
2 Press [DVD/VHS] to select “DVD/CD”.
3 Insert a disc and start play.
∫Radio (➜page 42)
1 During recording
Press [TUNER] to put the remote control in TUNER mode.
2 Press [FM/AM] to select the radio band.
3 Select the radio channel with the numbered buttons, [WCH] or 
[XCH].
[Note]
When you want to operate the VHS section again, be sure to press 
[VHS] to put the remote control in VHS mode.You can record from other video equipment (video cassette recorder, 
camera, etc.)
Preparation
≥Connect the equipment to this unit’s input terminals.
–Turn the unit off before making connections.
–If audio output on the other equipment is monaural, use a stereo-
monaural conversion cable (not included).
≥Insert the tape, ensuring its tab is in place and find the place to 
start recording.
1Press [WCH] or [XCH] to select “AU” 
channel.
2Press [1] (PLAY) to find the place to 
start recording.
3Press [;], then press 
[SHIFT]i[¥REC] to put the unit in 
recording standby mode.
4Press [SPEED] to select the tape 
speed.
SP>EP>VP
^b 
5Start play on the other equipment.
6Press [;] when you want to start 
recording.
To  s t o p
Press [∫].
∫To make a timer program to record from other 
equipment (➜page 34)
Using another source while recordingRecording from other equipment
A
Y
P
B/CB
PR/CR
COMPONENT
VIDEO OUTS-VIDEO
OUTLINE
OUTLINE
IN VIDEO
OUT DVD/ 
VCR
VIDEO
IN EXT DVD
L
R
RF IN
RF OUTLOOPEXT
75
AM
ANTFM
ANTLOOPANT
GND
Audio/video cable
(not included)To video and audio 
out terminals Other equipment (play)
[Remember] Press [VHS] first.
7388en.book  33 ページ  ２００３年１２月２２日　月曜日　午後９時３９分 
						

							34
RQT7388
Timer recording
You can create up to 16 timer recording programs. You can set the timer to record an individual 
program up to a month in advance, record at the same time on the same day every week, or at 
the same time daily.
Preparation
≥Make sure the unit’s clock is correct (➜page 38 to adjust it if necessary).
≥Insert a tape, ensuring its tab is in place (➜page 5).
See below for details.
1While stopped, press [PROG].
The timer-programming screen appears.
2Press [PROG] to select an available 
line and press [ENTER].
3Select “DATE” with [21] and change 
it with [34].
The date changes as follows:
A.Current date 
l;: 
lNext day up to one month later minus one day 
l;:
lWeekly timer: SU–SA > MO–SA > MO–FR 
l;:
a.Daily timer: SU > MO > TU > WE > TH > FR > SA 
4Select “CH” with [21] and change it 
with [34].
Select “AU” when recording from other equipment 
(➜page 33).
5Select “ON” with [21] and change 
the start time with [34].
6Select “OFF” with [21] and change 
the end time with [34].
7Press [SPEED] to change the tape 
speed.
SP>EP>VP>A§
^-b §Auto SP/EP change function ➜page 35
8If the Jet Navigator is on (➜ page 36),
Select a category.
Press [1] to select a category column. Press [34] to enter 
the category selection menu. Then select a category with 
[3421], and confirm with [MENU].
You can also set and change the category in the navigator list 
(➜page 37).
Repeat steps 2 to 8 to make further timer programs.
9Press [F] to put the unit on timer 
recording standby.
“F” lights on the unit’s display.
To release the unit from timer recording standby
Press [F].
To stop recording
Press [F].
For your reference
The timer works whether the unit is on or not, so you can play DVDs 
or listen to the radio (➜page 33). Switch the unit to standby if you 
are finished.
Timer recording
VOLUME
123
456
78
0
100
9
CH
NAVI
CANCEL SPEED PROG
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
OSD/
DISPLAY
TVFM/AM DVD/VHS
DV D T V
VHSTUNER
DISC 1 DISC 2 DISC 3
DISC 4
PICTURE MODE
SETUP
OPEN/CLOSE/EJECTJET REW CD MODE
DISC 5
S10ENTER
PLAY 
LIST
TV VOL
TV VOLRESETTV/VIDEOPA G E
GROUPMIX 2CH
SUBTITLEREPEAT
PLAY MODE
MULTI RE-MASTER
SUBWOOFER LEVELC.S.M
SFCC.FOCUSSUPER SRNDPROGRESSIVEMUTING
POSITION
MEMORY ZOOM
QUICK REPLAYREC
SLEEP
   PLAUDIOTESTCH SELECTSHIFT
INPUT SELECTOR
PROG
PROG.:ENTER END:MENU DATE CH ON  OFF  1/2
27WE 2 8:02
PM 9:30PM SP
SU-SA 125 10:30AM 11:00AM A
SU 14 3:00PM 4:00PM EP
19TU 5 10:15PM 11:30PM VP
28TH AV 8:02PM 9:30PM SP
30SA 4 7:10PM 7:55PM VP
–––– –– –:––  –:––
–––– –– –:––  –:––
1
2
3
4
5
6
7
8
VHS
7388en.book  34 ページ  ２００３年１２月２２日　月曜日　午後９時３９分 
						

							35
RQT7388
∫To check a program
1 Press [PROG].
The timer-programming screen appears.
∫To correct a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to correct and 
press [ENTER].
2 Select the item with [21] and correct it with [34].
∫To cancel a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to cancel.
2 Press [CANCEL].
To clear the timer programming screen
Press [MENU].
The unit switches tape speed to EP if it determines there is not 
enough tape to record the entire program in SP mode. The change 
may start at the beginning of the recording or part way through, 
depending on the remaining tape. 
Before using this function, set the length of the tape you are using 
(➜page 40). It may not work correctly if you use tapes with irregular 
lengths.
[Note]
This function does not guarantee recording of the entire program.
To check, correct, and cancel timer programs
Auto SP/EP change
DATE CH ON  OFF  1/2
27WE 2  8:02PM 9:30PM SP
SU-SA 125  10:3 0AM 11:0 0AM A
SU 14  3:00PM 4:00PM EP
19TU 5  10:1 5PM 11:3 0PM VP
28TH AV  8:02PM 9:30PM SP
30SA 4  7:10PM 7:55PM VP
–––– –– –:––  –:––
–––– –– –:––  –:––
1
2
3
4
5
6
7
8
SELECT : s/r:3421
1st program 
(30 min.)2nd program (60 min.) Example program combination
Example program combination
30 min. at SP15 min. 
at SP45 min. 
at EP(when using a 60-min. 
tape)
[Remember] Press [VHS] first.
7388en.book  35 ページ  ２００３年１２月２２日　月曜日　午後９時３９分 
						

							36
RQT7388
Finding programs with the Jet Navigator and VHS Index Search System (VISS)
The unit saves the date, channel, time, and category of the recordings you make and shows 
them on the Jet Navigator list, making it easier to find and play them. It can save the data for up 
to 14 recordings on a tape, for 20 different tapes, and for a total of 50 recordings.
See below for details.
1Press [MENU] to display the “VHS 
MENU” screen.
2Press [34] to select “OPTION” menu 
and press [ENTER].
3Press [34] to select “JET 
NAVIGATOR” and press [21] to 
change the setting to “ON”.
4Press [34] to select “TAPE 
SELECT” and press [21] to set the 
length of the tape you are using.
T120: T30, T60, T90, T120 tapes
T160: T140, T160 tapes
T180: T180 tapes
5Record programs (➜pages 32–34). 
The unit makes the list as you record.
1Press [NAVI] to show the “JET 
NAVIGATOR” screen.
2Press [NAVI] to highlight the program 
you want to watch.
The most recent program is highlighted first. 
Once you have highlighted the program, wait about three seconds. 
The unit then starts searching for the program and starts play.
The channel, date, and time of a recording appear on the television 
when play starts.
To clear the Jet Navigator list
Press [MENU].
∫To delete the Jet Navigator on a video cassette 
tape
Keep [CANCEL] pressed for more than 5 seconds while the Jet 
Navigator list appears. “- -” appears on the list.
∫To delete all the Jet Navigator data stored in the 
unit’s memory (➜page 40).
Saving Jet Navigator data
Using the Jet Navigator to find programs
VOLUME
123
456
78
0
100
9
CH
NAVI
CANCEL SPEED PROG
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
OSD/
DISPLAY
TVFM/AM DVD/VHS
DV D T V
VHSTUNER
DISC 1 DISC 2 DISC 3
DISC 4
PICTURE MODE
SETUP
OPEN/CLOSE/EJECTJET REW CD MODE
DISC 5
S10ENTER
PLAY 
LIST
TV VOL
TV VOLRESETTV/VIDEOPA G E
GROUPMIX 2CH
SUBTITLEREPEAT
PLAY MODE
MULTI RE-MASTER
SUBWOOFER LEVELC.S.M
SFCC.FOCUSSUPER SRNDPROGRESSIVEMUTING
POSITION
MEMORY ZOOM
QUICK REPLAYREC
SLEEP
   PLAUDIOTESTCH SELECTSHIFT
INPUT SELECTOR
MENU
NAVI
Saving Jet Navigator data
OPTION 1/2
OSD ON OFF
TAPE SELECT
 T120 T160 T180
BLUE BACK  ON  OFF
JET NAVIGATOR  ON  OFF
DELETE NAVIDATA  NO  YES
JET SEARCH  x27  x35
SELECT : s/r:
END :MENU
21
≥
≥
≥
≥
≥
≥
3 4
Using the Jet Navigator to find 
programs
 JET NAVIGATOR
DATE CH  ON  CATEGORY
10/18 1 
10:30PM    MUSIC
10/19 124  3:00PM    SPORT
10/21 5 10:15AM   - -
10/23 AV  8:02PM   - -
10/26 4 7:10AM    EDUCA
10/27 2 8:02AM   - -
10/27 12 8:30PM   - -1
SELECT:NAVI,   END:MENU1
VHS
7388en.book  36 ページ  ２００３年１２月２２日　月曜日　午後９時３９分 
						

							37
RQT7388
Set categories to make it easier to see what kind of programs are in 
the list.
1Press [1] while the program you want 
to categorize is highlighted.
2Press [3421] to select a category 
and press [MENU] to confirm and 
return to the previous screen.
To return to the Jet Navigator list
Press [MENU].
[Note]
≥If you have already stored 14 programs on a tape and you then 
store another one, the new item is added and the oldest is deleted.
≥“REMAINING PROGRAM 0 DELETE JET NAVIGATOR DATA” 
appears when you try to store more than fifty programs. The new 
item is added and the oldest item is deleted.
≥“REMAINING CASSETTE 0 FOR JET NAVIGATOR DATA” 
appears when you try to store items for more than 20 tapes. Delete 
all the Jet Navigator data in the unit if you want to save the data for 
the tape (➜page 40).
≥The list does not appear when playing tapes recorded on other 
equipment.
≥Parts of the list data are recorded on the tape. Take care when 
recording over older recordings that you do not overlap it. It is 
recorded within a few minutes either side of the beginning of the 
recording (longer if you used EP or VP).
To demonstrate the Jet navigator function
Keep [NAVI] pressed for more than 5 seconds without inserting a 
cassette tape.Use the index marks on a tape to find sections to play.
The unit adds index marks when recording starts. To add them 
manually during recording, press [SHIFT]i[¥REC].
While stopped or during play
Press [:] (backward) or [9] (forward) 
to skip to the part you want to play.
The channel, date, and time of a recording appear on the television 
when play restarts.
≥Up to 20 index signals can be searched for in both directions.
≥You can reduce the number of skips by pressing the opposite 
button.
≥This feature may not work correctly if the marks are too close 
together. Make recordings of at least 15 minutes (25 minutes in VP 
mode).
Setting categories
Category Indication Icon
Movie MOVIE
Music MUSIC
Drama DRAMA
Education EDUCA
Documentary DOCUM
Sports SPORT
Children CHILD
News NEWS
Others OTHER
Finding programs—VHS Index Search 
System (VISS)
[:][9]
Index mark Program Program Programtwice twiceonce once
[Remember] Press [VHS] first.
7388en.book  37 ページ  ２００３年１２月２２日　月曜日　午後９時３９分 
						

							38
RQT7388
Changing settings
≥The settings remain intact even if you switch the unit to standby.
See below and the following page for details (while VHS MENU is displayed).
Select the language for these menus and other on screen displays.
1Press [34] to select “LANGUAGE” 
and press [ENTER].
2Press [34] to 
choose the 
preferred 
language.
≥ENGLISH (Factory preset)
≥ESPAÑOL
≥FRANÇAIS
Press [MENU] to confirm and return to the previous screen.
The clock is set automatically after Plug-in Auto Tuning (➜page 15). 
Do the following if you want to set it again or if the time is not set 
correctly.
1Press [34] to select “CLOCK SET” 
and press [ENTER].
2Press [34] to 
select “AUTO 
CLOCK SET” and 
press [ENTER].
Auto setting starts. This can take 
some time.
To stop partway through
Press [MENU].
∫If the unit cannot set the clock automatically
The MANUAL CLOCK SET screen appears. Set the time manually 
(➜below).
2Press [34] to 
select “MANUAL 
CLOCK SET” and 
press [ENTER].
3Press [21] to 
select the item you 
want to change and press [34] to 
change the setting.
4Press [MENU] to start the clock and 
exit the setting screen.
∫Time reset function
To return the clock to the exact hour, wait until the clock in the 
MANUAL CLOCK SET screen is within 2 minutes either side of the 
hour (e.g., between 11:58:00 and 12:01:59) press [MENU] to clear 
the screen. The clock changes to the exact hour.
12 3 4
Shows VHS 
MENU.Select the item. Make the settings. Press to exit.
VOLUME
123
456
78
0
100
9
CH
NAVI
CANCEL SPEED PROG
SKIPSLOW/SEARCH
MENU
ENTER
DIRECT 
NAVIGATOR
TOP MENU
RETURN
OSD/
DISPLAY
TVFM/AM DVD/VHS
DV D T V
VHSTUNER
DISC 1 DISC 2 DISC 3
DISC 4
PICTURE MODE
SETUP
OPEN/CLOSE/EJECTJET REW CD MODE
DISC 5
S10ENTER
PLAY 
LIST
TV VOL
TV VOLRESETTV/VIDEOPA G E
GROUPMIX 2CH
SUBTITLEREPEAT
PLAY MODE
MULTI RE-MASTER
SUBWOOFER LEVELC.S.M
SFCC.FOCUSSUPER SRNDPROGRESSIVEMUTING
POSITION
MEMORY ZOOM
QUICK REPLAYREC
SLEEP
   PLAUDIOTESTCH SELECTSHIFT
INPUT SELECTOR
MENUENTER
Select
Register
ENTER
Select
Register
MENU
VHS MENU
LANGUAGE
CLOCK SET
CHANNEL SET
OPTION
SELECT: :  , ENTER
END :MENU
34
≥
LANGUAGE
CLOCK SET
AUTO CLOCK SET
LANGUAGE
ENGLISH
ESPAÑOL
FRANÇAIS
SELECT: :
END :MENU
34
≥
AUTO CLOCK SET
AUTO CLOCK SETTING
IN PROGRESS.
PLEASE WAIT.
CANCEL:MENU
MANUAL CLOCK SET
MANUAL CLOCK SET
  Y  M  D    H:M
 2003  1  1  12:00
AM
D. S. T.  :  YES  NO
SELECT : s/r:
START :MENU
21
≥
3 4
VHS
7388en.book  38 ページ  ２００３年１２月２２日　月曜日　午後９時３９分 
						

							39
RQT7388
The unit tunes automatically after you plug it in and turn it on for the first time (➜page 15, Plug-in Auto Tuning), but you can start the process 
again if necessary.
≥Make sure you have tuned to a television channel. This does not work if you have selected “AU” channel.
1Press [34] to select “CHANNEL SET” and press [ENTER].
2Press [34] to select “ANTENNA 
SYSTEM” and press [ENTER].
3Press [34] to select “TV” or “CATV” 
to suit the type of antenna you are 
using. 
Channels are set corresponding to the antenna system you select. 
This is set automatically when you do Plug-in Auto Tuning.
To exit the settings screen
Press [MENU] until the screen disappears.
Auto tuning searches for TV stations and memorizes every tuned 
program position. Other program positions are skipped. (Channel 
range ➜right)
2Press [34] to select “AUTO” and 
press [ENTER].
Auto tuning starts. It takes three or more minutes to complete.
To stop partway through
Press [MENU].You can manually preset channels that are skipped when using the 
auto channel setting, and manually skip channels that are preset.
2Press [34] to select “MANUAL” and 
press [ENTER].
3Press [34] to select “CH” and [21] 
to select the channel.
4Press [34] to select “BLANK” and 
[21] to select “ON” or “OFF”.
To exit the settings screen
Press [MENU] until the screen disappears.
∫Channel range
≥TV mode
≥CATV mode
CHANNEL SET
ANTENNA SYSTEM
AUTO
ANTENNA SYSTEM
≥
TV
CATV
SELECT: :
END :MENU
34
AUTO CHANNEL SET
PROCEEDING
END :MENU2
MANUAL
Band Airwaves
VHF 2–13
UHF 14–69
Band Cable
VHF 2–13
CATV LOW BAND 95–99
CATV MID/SUPER BAND 14–36
CATV HYPER BAND 37–65
ULTRA BAND66–94
100–125
SPECIAL CATV CHANNEL 1
MANUAL CHANNEL SET
CH
BLANK
SELECT
END :MENU  2
ON OFF
: s/r:
3421 ¥
[Remember] Press [VHS] first.
7388en.book  39 ページ  ２００３年１２月２２日　月曜日　午後９時３９分 
						

							40
RQT7388
Changing settings
1While VHS MENU is displayed (➜page 38)
Press [34] to select the “OPTION” 
and press [ENTER].
2Press [34] to select the item and 
press [21] to change the setting 
(➜below).
To exit the settings screen
Press [MENU] until the screen disappears.Panasonic video cassette recorders use the same remote control 
system so they may respond unintentionally to a command from this 
remote control. Change the code on this unit and its remote control 
(the two must match) if you place another Panasonic video cassette 
recorder close together.
≥Use “1”, the factory preset, under normal circumstances. 
1While OPTION menu is displayed
Press [34] to select the “REMOTE 
CONTROL” and press [ENTER].
2Press [21] to select the code (1 or 2) 
and press [ENTER].
The remote control code on the unit has been set.
3While pressing [ENTER] on the remote 
control, press and hold the numbered 
button ([1] or [2]) corresponding to the 
code you selected in step 2.
The remote control code on the remote control has been set.
The following is displayed when you use a remote control with the 
different code.
The unit’s remote control code
Change its code to match the unit’s (➜step 3).
OPTION
OPTION 1/2
OSD ON OFF
TAPE SELECT
 T120 T160 T180
BLUE BACK  ON  OFF
JET NAVIGATOR  ON  OFF
DELETE NAVIDATA  NO  YES
JET SEARCH  x27  x35
SELECT : s/r:
END :MENU
21
≥
≥
≥
≥
≥
≥
OPTION 2/2
MTS MAIN SAP MONO
REMOCON CODE                   1    2
DISPLAY
 BRIGHT DIM OFF
SELECT : s/r:
END :MENU
21
≥
≥
3 4
3 4
≥
REMOTE CONTROL
Items Settings (Underlined items are the factory preset.)
OSD (➜page 41, On-screen display)ON
: Messages appear on the television for about five seconds 
after you perform operations.
OFF: Messages do not appear.
TAPE SELECT
Set the length of tape you are using so the unit can show the correct 
remaining time.T120
: T30, T60, T90, T120 tapes
T160: T140, T160 tapes
T180: T180 tapes
BLUE BACKON
: The screen shows a blue background when you play 
unrecorded portions.
OFF
JET NAVIGATOR (➜page 36)ON: Jet Navigator data automatically registered.
OFF
: Data not registered.
DELETE NAVIDATA
Delete all the Navigation data registered in the unit.
See page 36 to delete data on a single tape.NO
YES: Then press [ENTER] when you want to delete all the Jet 
navigator data.
JET SEARCH (➜page 30)
Set the speed for JET SEARCH when playing EP and VP tapes.a27a
35
Select a27 if the picture is poor at a35.
MTS (➜page 41, Changing audio)
Set the MTS (Multi-channel Television Sound Stereo) reception 
type.MAIN
: To receive stereo broadcasts.
SAP: To receive SAP when being broadcast.
MONO: To receive monaural broadcasts (e.g., when reception is 
poor).
REMOTE CONTROL1
2
DISPLAY
Set the brightness of the units display when the unit is in standby 
mode.BRIGHT: The display is bright all the time.
DIM
: The display dims when the unit is in standby mode.
OFF: The display turns off when the unit is in standby mode.
VHS
7388en.book  40 ページ  ２００３年１２月２２日　月曜日　午後９時３９分