Panasonic Dvd Vcr DeckPv D4761 Operating Instructions

							[email protected]
When  appears on the screen while
a button is being operated, it means
that the corresponding operation is
prohibited by DECK or the disc.
The ANGLE Indicator lights up on
DECK when a scene recorded
at different angles is detected.
The angle number can be set
beforehand so that the angle is
switched whenever the ANGLE
Indicator lights up.ANGLE Indicator
 DVD Karaoke (1 vocal)   VOCAL ON     VOCAL OFF
 DVD Karaoke (2 vocals) VOCAL V1 +
 V2    VOCAL V1    VOCAL V2    VOCAL OFF 
 Video CD                        LR     L     R
1
Press AUDIO in Play mode
to display the audio screen.
Vocal Selection for Karaoke D iscs (DVD/Video CD)
DVDs may contain scenes shot from multiple camera angles
allowing the same scene to be viewed at different angles.
You can view these angles, if available, using  the ANGLE
button.
1
Press ANGLEin Play mode to display the
angle selection on-screen.
Display disappears after
5 seconds.
Multiple Angle Viewing (DVD only)
2
Press  or ANGLEto select the desired angle.
2
Press  (or  )
to select as shown below,
and
press 
 (or ) to set.
(DVD only)
Number of angle being played back.
ANGLE : 2ANGLE : 2
SELECTSELECT: : SESET:T:SETSET
ANGLE : 1ANGLE : 1
SELECTSELECT:  :  SESET:T:SETSET
SELECT :   SET : SET
AUDIO:2 ENG VOCAL ONVOCAL ON
You can enlarge specific portions of a picture and select
the zoom ratio using the ZOOM button in Play mode.
Press ZOOM repeatedly
to change display as follows.
Picture Zoom (DVD only)
You can enlarge the center portion of the image
to one of 2 magnifications. The subtitle cannot be enlarged nor
can it’s position be changed.
The picture zoom feature does not
work with a Video CD.
During picture zoom, “ZOOM1” or
“ZOOM2” is displayed on-screen.
Zooming, on some discs, may result
in poor picture quality, or not operate.
X 1.0 (ORIGINAL)
1st press2nd press 
3rd press
X 1.5 (ZOOM 1) X 2.0 (ZOOM 2)
Hello!Hello!Hello!Hello!Hello!Hello!ZOOM 1ZOOM 1ZOOM 2ZOOM 2

 Use the , ,  and   buttons to move the position up,
down, left and right.
Notes
Notes
AUDIO SET
ANGLE SUB TITLE
ZOOM
*Important: if a remote control button does not work when pressed,
press the DVD button on the remote and tr y the button again.
SELECT 
DV D
 Operation 
						

							42For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Some DVDs have more than one title, e.g. movies.
If the disc offers a title menu, you can select the desired
title number. (Operation may vary according to the disc.)
1
Press TITLE*
in Play mode
to display the title screen.
Title Menu (DVD only)
Pressing TITLE again
resumes play from the
scene when 
TITLE was
first pressed.
DVDs may offer a special menu. This menu may include
guides to unique contents, audio/subtitle languages, etc.
Although contents and operation may vary, the following
steps show basic steps for using the menu.
1
2
Press MENUin Play mode to display
DVD MENU.
1) Press 
  orNUMBER keysto select an item, and
2) press SET or PLAYto perform.
DVD Menu (DVD only)
Pressing MENU again
resumes play from the
scene when 
MENUwas first pressed.
2
1)Press   orNUMBER keysto select a title.
2)press SET or PLAYto start playing.
Disc Operation (continued)
Step 2) not necessary
when using NUMBER keys.
 
T I TLE  MENU
Cas t l es
Love
 r s
Dogs
B
 i r ds
T I TLE  MENU
Cas t l es
Love
 r s
Dogs
B
 i r ds
DVD MENU
3 . ANGLE
1 . SUBT I TLE
2 . AUD
 I O
DVD MENU
3 . ANGLE
1 . SUBT I TLE
2 . AUD
 I O
B i rds
of  the  world

Repeat step 2 if more than
one menu.
MENU
SET STOP PLAY
NUMBER
keys
TITLE
CLEAR
ACTION
SELECT 
Step 2) not necessary
when using NUMBER keys.
DISPLAY 
						

							[email protected]
Up to 15 tracks can be programmed.
“ ” or “ ” (depending on disc) indicates additional
PROGRAM PLAY screen. Press   for next or
previous screen.
• To clear the last program one by one
Press 
  to move to “CLEAR LAST” and
press SET. (Pressing CLEAR on remote control
also clears last program.)
 To clear all programs
Press 
  to move to “CLEAR ALL” and pressSET. (Programs are also cleared when the power is
turned off or the disc is removed.) You can program specific tracks and order of play.
Program Play (Video CD/CD)Ready Checklist
DECK is in DVD mode, press DVD.
Video CD or CD is inserted.
1Press ACTIONto display MENU.
2Press to select
“SET UP DVD,” and
press 
SETto display DVD screen.
3Press to select
“PLAY MODE,” and
press 
SETto display.
4Press to select
“PROGRAM PLAY,”
and
press 
SET to display.
6
Press  to select “START,” and
press SET to start play
of programs in the
sequence selected.
To cancel, press STOPduring play, then pressCLEAR.
5Press  to select a track
number (Track
numbers on disc are
displayed.), and
press 
SET.
Repeat step 5 to select another track.
The selected track is added on the right side.
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : Pan&Scan  4 : 3
PARENTAL LOCK :LEVEL 8PLAY  MODEPLAY  MODE
PLAY  MODE
SELECT :  
SET : SET
END : ACT I ONPROGRAM  PLAYPROGRAM  PLAYRANDOM  PLAY
PROGRAM  PLAY
SELECT :  
SET : SET
END : ACT I OND I SC PROGRAM
161116 5 8
2 7 12 17 15 6
3 8 13 18 1 13
4 91419 3 2
5101520 2
     
CLEAR  LAST
CLEAR  ALLSTART
START
PROGRAM  PLAY
SELECT :  
SET : SET
END : ACT I OND I SC PROGRAM
161116 5 8
2 7 12 17 15 6
3 8 13 18 1 13
4     9  14 19 3 2
5101520 2
      
CLEAR  LAST
CLEAR  ALL START
Notes
SELECT :              EXIT          : ACTION    SET:SET
                MENU
SET  UP  DVD
SET  UP  VCR
SET  CLOCK
IDIOMA/LANGUE : ENGLISH
VCR’S  OUTPUT  CH:3
Program Repeat Play
 (Video CD/CD)
4Press SETto enter Select mode.
“REPEAT OFF” will flash.
5Press to select “DISC REPEAT.”
(DECK Information Screen) (DECK Information Screen)
1Do operation steps 1 ~ 6
at left on this page.
2Press DISPLAY to display
Disc Information screen.
(Disc Information Screen)
3
Press DISPLAY to display
DECK Information screen.
6Press SETto set mode. (“DISC REPEAT”
will stop flashing.)
To cancel, select “REPEAT
OFF” in step 5,
then press 
SET.
SELECT : 
SET : SET END : D I SPLAY
PLAY
DISC REPEATDISC REPEATPROGRAM PLAY 
SET : SET END  : D I SPLAY
PLAY
REPEAT  OFFREPEAT  OFFPROGRAM  PLAY
SET : SET NEXT : D I SPLAY
TRACKTRACK:    1:    1V I DEO  CD
PBC : OFF 1 : 35 : 12
*Important: if a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
DV D
 Operation 
						

							44For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tracks are played in a random order.
Random Play (Video CD/CD)
Press ACTION*
to display MENU.1
Disc Operation (continued)
Press 
to select “SET UP DVD,”
and
press
 SET
to display DVD screen.
2
Press 
to select “PLAY MODE,”
and
press 
SET
to display.
3
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : Pan&Scan  4 : 3
PARENTAL LOCK :LEVEL 8PLAY  MODE
Press to select
“RANDOM PLAY,” and
press 
SETto begin random play.
To cancel, press STOPduring play, then pressCLEAR.
4
PLAY  MODE
SELECT :  
SET : SET
END : ACT I ONPROGRAM  PLAY
RANDOM  PLAY
SELECT :              EXIT          : ACTION    SET:SET
                MENU
SET  UP  DVD
SET  UP  VCR
SET  CLOCK
IDIOMA/LANGUE : ENGLISH
VCR’S  OUTPUT  CH:3
*Important:
If a remote control button does not
work when pressed, press the DVD
button on the remote and try the
button again.
SELECT 
STOP
CLEAR
ACTION
SET 
						

							[email protected]
1Press DISPLAY in Play or Stop mode
to display “On-Screen Displays.”
When DISPLAY is pressed, On-Screen Displays show
disc information (title/chapter/track number, elapsed
playing time) and DECK information (Repeat Play, Play
mode).
Each press of 
DISPLAY changes on-screen
display as follows. (Refer to p. 46 or 47.)
Ready Checklist
DECK is in DVD mode, press DVD.
DISPLAY button does not function while DVD
TITLE MENU is displayed.
Note
3
Press 
to select the setting, and
press 
SET.
To make corrections,
press 
 and SET
repeatedly to move to
error, then correct.
 Pressing  is effective
for elapsing time
instead of the above
buttons. Press 
repeatedly to delete
the error, then correct. For some functions the
setting will be registered
immediately without
pressing 
SET.
When numbers are
displayed (e.g. title
number), 
NUMBER keysare also available.
To return to normal
screen,
press 
CLEAR orDISPLAY repeatedly.

SELECT :
SET : SET NEXT : D I SPLAY
T I TLE : 12 DVD
CHAPTER:110:12:34
SELECT :
SET : SET NEXT : D I SPLAY
T I TLE : 12 DVD
CHAPTER:240:12:34
2Press  (or  )
to select 
an item, and
press SET.

SET : SET NEXT : D I SPLAY
TRACK:12V I DEO  CD
PBC : OFF 0 : 12 : 34
SET : SET NEXT : D I SPLAY
TRACK:17V I DEO  CD
PBC : OFF 0 : 12 : 34Notes
When DISPLAY button is
pressed during playback of a
Video CD with Playback control,
NUMBER keys are not available
on the displayed screen. In this
case, press 
DISPLAY again to
remove the displayed screen.
When 
 appears on the screen
while a button is being operated,
it means that the corresponding
operation is prohibited by DECK
or the disc.
SET NUMBER
keys
DISPLAY
SELECT 
DVD Operation using On-Screen Displays
DV D
 Operation
Selected disc information
Selected DECK information
Normal Screen
CLEAR 
						

							46For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
SET : SET NEXT : D I SPLAY
TRACK TRACK:    1
:    1V I DEO  CD
PBC : OFF 1 : 35 : 12
SELECT :  
SET : SET NEXT : D I SPLAY
TITITLETLE:1DVD
CHAPTER : 12 1 : 12 : 55
DVD Operation using On-Screen Displays (continued)
Detailed Descriptions of each On-Screen Display
1. TITLE No.
Change the No. by pressing * or NUMBER keys,
and press SET.
2. Chapter No.
Change the No. by pressing  or NUMBER keys,
and press SET.
3. Disc currently being played
4. Elapsed playing time
The screen may be changed by selecting the elapsed time.
 Change the elapsed time by pressing NUMBER keys, and press SET.
e.g., press 0 - 1 - 2 - 3 - 4 - 5 for 01 : 23 : 45.
 This function does not work with some discs.
1
23
4
Disc information screen (for DVD)
When  appears on the screen while
a button is being operated, it means
that the corresponding operation is
prohibited by DECK or the disc.
Disc information screen (for Video CD/ CD)
Track No. and the elapsed playing
time are not displayed during play
started from menu of Video CDs with
playback control.
A. Track No.
Change the No. by pressing  or NUMBER keys,
and press SET.
B. Playback control ON/OFF
[Video CD with playback control only]
C. Disc currently being played
D. Elapsed playing timeA
B
C
D
Notes
  OFF Video CD menu play is cleared.
  ON Video CD menu play is displayed.
  Video CD             CD
SET NUMBER
keys
SELECT  
						

							[email protected]
SELECT : 
SET : SET END : D I SPLAY
PLAY
CHAPTER REPEAT CHAPTER REPEAT 
SET : SET END  : D I SPLAY
PLAY
DIDISC  REPEATSC  REPEATRANDOM  PLAY
*Important:If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
continued)
TITLEchapterchapter
chapter
CHAPTER REPEAT
TITLE REPEAT
NORMAL PLAY
CURRENT PLAYBACK POSITION
tracktrack
track
TRACK REPEAT
DISK REPEAT
NORMAL PLAY
CURRENT PLAYBACK POSITION
 CHAPTER/TITLE REPEAT PLAY (DVD) TRACK/DISC REPEAT PLAY (Video CD/CD)
For your reference a. Repeat Play
Detailed Descriptions of each On-Screen Display
DECK information screen
  Change the desired mode during play by pressing , and press SET.
  Video CD/CD    TRACK REPEAT        DISC REPEAT    REPEAT OFF
         DVD         CHAPTER REPEAT    TITLE REPEAT    REPEAT OFF
For repeat play in VCR mode, see p. 36.
b. Play mode [Video CD/ CD only] (See p. 43 or 44.)
PROGRAM  PLAY     program play
RANDOM  PLAY     random play
                
-      normal play
a
b
Note
DV D
 Operation 
						

							48For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1
DVD Lock  (DVD only)
LEVEL 0 : LOCK ALL, Playback of all DVDs, CDs and
Video CDs is prohibited.
(Use to prohibit play of mature theme DVDs not
encoded with rating level.)
LEVEL 1 : mature theme DVDs
LEVEL 2 : DVDs expressly for children can be played back.
LEVEL 3 to 7 : DVDs for general audiences/children can be
played back. (DVDs with mature content
are prohibited.)
LEVEL 8 : NO LIMIT: (Factory preset)
All DVDs can be played back.
You can prevent playback of DVDs in a specific rating level which may be unsuitable
for children.
Some DVDs are encoded with a rating level. If the disc rating is higher (stricter) than the one
you preset, playback will be prohibited.

After DVD Lock is set and a blocked
DVD is played, this message will
appear.
The message may differ depending on
the disc.
To continue viewing a blocked
program for now,
Press  to select “YES” and SET.
Then, enter your 4-digit secret code.
When “NO” is selected, blocked
programs cannot be viewed.
DVD Lock Feature
SELECT : 
SET : SET END : D I SPLAY,
YOUR  SELECT I ON  EXCEEDS  THE
PLAYER  S  RAT I NG  L I M I T.
DO  YOU  WANT  TO  CHANGE  THE
LIMIT?
YES
YESNO
Discs not encoded with rating
level will play even if the jacket
states it is for mature audiences.
For these discs, the DVD Lock
Ratings will not work.
Caution
2
5Press  to select rating level, and
press SETto select “LOCKED” or
“UNLOCKED.”
LEVEL 8LEVEL 8LEVEL 7
LEVEL 6
LEVEL 5LEVEL 4 
LEVEL 3
LEVEL 2      
LEVEL 1
LEVEL 0     
PARENTAL LOCK
SELECT 
      :              SET               :SET
END              : ACTION 
NO LIMIT
6
Press ACTION three times
to end setup.
A 4-digit code must be entered to view a blocked
program or change rating settings.
Press ACTION*
to display MENU.
SELECT :              EXIT          : ACTION    SET:SET
                MENU
SET  UP  DVD
SET  UP  VCR
SET  CLOCK
IDIOMA/LANGUE : ENGLISH
VCR’S  OUTPUT  CH:3
Press to select “PARENTAL LOCK,”
and
press 
SET to display.
3
1)Press NUMBER keysto enter your secret code.
2) Enter same secret code
again for confirmation.
3)Press 
SET to display.
Step 2) not necessary when
changing rating or secret
code.
Take care that you are not
observed entering the
secret code.To Make CorrectionsPress  repeatedly
to move the cursor.
Press 
NUMBER keysto make the correction.
Change your secret codeYou will need your current code.
Do step 1 ~ 3 left.
Enter current secret code.
Press 
CLEAR to clear the code.
Do step 4 to enter new code.
DO NOT forget your secret code.
Note
ENTER  : 0 - 9  
END       : ACT I ON    
           LOCK   ENTER  4-D I G I T   CODE----  
Press to select “SET UP DVD,”
and
press 
SETto display DVD screen.
4
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : Pan&Scan  4 : 3
PARENTAL LOCK   : LEVEL 8
PARENTAL LOCK   : LEVEL 8
*Important:If a remote control button does not work when
pressed, press the DVD button on the remote
and try the button again. 
						

							[email protected]
Disc Languages (DVD only)
To select and set the language of the audio soundtrack,
subtitles, or title/DVD menus for all discs to be played.“AUDIO” selections 
(Factor y preset: English)To select the audio soundtrack language.English/ Spanish/ French
Original: Original disc language
OTHER ✱✱✱✱: Other language selection*
1
“SUBTITLE” selections(Factory preset: AUTO)To select the subtitle language.AUTO:Same language selected
for “AUDIO”
If language set for “AUDIO” is used in
playback,  subtitles will not appear.
If another language is used during
playback, the subtitles will appear
in the language selected at “AUDIO”
setup.
English/ Spanish/ French
OTHER ✱✱✱✱: Other language selection*
1
“MENUS” selections (Factory preset: English)To select the language used in title
menus or DVD menus.
English/ Spanish/ FrenchOTHER ✱✱✱✱: Other language selection*1
To enter OTHER ✱✱✱✱
      
 code number,Press NUMBER keys (Please refer to
language codes on p. 52).
To make corrections, press 
repeatedly to delete language code
number, and correct.
Settings for DVD Operation
1
3
Once initial settings are done, they
remain in memory (even after power off)
until changed. This means DECK will
always operate under the same
conditions (especially DVDs) each time.
DISC LANGUAGES (See below)All languages offered on the disc can be set.
If the language not offered is set, the original disc
language will be selected.
AUDIO OUTPUT (See p. 50.)You can set the audio output that comes from the
digital audio output terminal.
STILL MODE (See p. 51.)To select “FIELD” (Field still) or “FRAME” (Frame
still) to prevent jitter or make small text or fine
patterns clearly visible in a still picture. When
“AUTO” is set “FIELD” or “FRAME” is selected
automatically.
TV MODE (See p. 51.)To select whether the video material for a wide-
screen will be played back in the Pan & Scan style,
Letterbox style or 16 : 9 style.
Ready ChecklistDECK is in DVD mode, press DVD.
4
Press 
to select
“DISC LANGUAGES,”
and
press 
SET
to display screen. Press 
ACTION in Stop mode
to display MENU.
Press 
to select an item, and
press SET.
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I ONDIDISC  LANGUAGESSC  LANGUAGESAUD I O  OUTPUT
ST I LL  MODE : AUTOTV  MODE : Pan&Scan  4 : 3PARENTAL LOCK :LEVEL 8
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I ONDIDISC  LANGUAGESSC  LANGUAGESAUD I O  OUTPUT
ST I LL  MODE : AUTOTV  MODE : Pan&Scan  4 : 3PARENTAL LOCK :LEVEL 8
2Press 
to select “SET UP DVD,”
and
press 
SET
to display screen.
Press 
to select an item, and
press 
SET repeatedly
for desired language.
(Please refer right.)5
D I SC  LANGUAGES
SELECT :  
SET : SET
END : ACT I ONAUAUDIDIO: : EnglishEnglishSUBT I TLE : AUTO
MENUS : E n g l i s h
6
Press ACTION to redisplay DVD menu
and go to step 3 to setup another item.
Or, press 
ACTION three times to exit.
*1If the selected language is not offered,
the original disc language is selected.
SELECT :              EXIT          : ACTION    SET:SET
                MENU
SET  UP  DVD
SET  UP  VCR
SET  CLOCK
IDIOMA/LANGUE : ENGLISH
VCR’S  OUTPUT  CH:3
SET ACTION
SELECT 
NUMBER
keys
DV D
 Operation
CLEAR 
						

							50For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Make settings according to amplifier
connected to optical audio output as shown
in above table.
When a dts decoder is not connected, to
enjoy dts DVD, please select audio output
other than dts at the dts DVD menu screen.
Otherwise, there will be no sound.
*1 Audio Output 2 from DECK is converted to
48 KHz/16 bit in addition to audio from digital
audio output.
To enjoy high quality sound at 48 KHz/20 bit
/24 bit or 96 KHz, connect the amplifier or
decoder directly to the Audio Output 2
connectors, not to the Digital Audio Output
connector. [Select “OFF” at the “LPCM (DVD)”.]
*2 When connecting an amplifier (with an
optical digital input connector) which does
not contain the Dolby Digital or dts decoder,
be sure to select “OFF”.
If “Bitstream” is selected, starting DVD play
may cause such a high level of noise as to
be harmful to your ears and damage the
speakers.
*3 When a dts decoder is connected, please
select “Bitstream” in “dts”. If “OFF” is
selected, there will be no sound.
Audio Output
Select the digital output to be output from the optical
digital audio output connector of DECK.
Do steps 1 and 2 on p. 49.

 

 


 “LPCM (DVD)” selections
OFF:Linear PCM of less than 48 KHz/16 bit is
output. When playing DVDs recorded in
linear PCM of over 48 KHz/20 bit or 96 KHz,
no digital audio is output. (Factor y preset)
PCM:When playing DVDs recorded in linear PCM
of 48 KHz/20 bit/24 bit or 96 KHz, digital
audio converted to 48 KHz/16 bit is output.
(Digital output of PCM audio is restricted to
48 KHz/16 bit or below for copyright
protection.)

 

 


 “Dolby Digital” selectionsBitstream:Dolby Digital bitstream (1ch-5.1ch)
is output. (Factor y preset)
OFF:No output.

 

 


 “dts” selectionsBitstream:dts bitstream is output. (Factory preset)
OFF:No output.

 

 


 “DRC (Dynamic Range Compression)” selectionsOFF:Nor mal audio range is selected. (Factor y
preset)
ON:For dynamic sound even at low volume, this
is useful for late-night listening. [Dolby Digital
DVDs only].

 

 


 “SURROUND” selectionsSurround Sound creates the effect of sound
coming from non-existent rear speakers even
when only connected to a 2-channel stereo system.
OFF:No Surround Sound effect. (Factor y preset)
ON:Surround Sound effect.
Press to select an item, and
press 
SET
repeatedly for output.
(See below.)
Press *
to select
“AUDIO OUTPUT,”
and
press 
SET
to display screen.
1
Settings for DVD Operation (continued)
3 2
4
Turn off other surround effects when using
this surround effect.
For optimum effect, the distance between
DECK and the listener should be about 3 or 4
times the distance between the right and left
front speakers.
Notes
Recommended setting
LPCM
(DVD)
OFF
PCM*
1
PCM*1
PCM*1
Dolby
Digital
OFF
OFF*
2
Bitstream
Bitstreamdts
OFF
OFF*
2
OFF
Bitstream
No amplifier is connected
AV amplifier (with digital
audio input connector)
without Dolby Digital/dts
decoder
AV amplifier including
Dolby Digital decoder
AV amplifier including
Dolby Digital/dts decoder
*3
   Type of amplifier
   to be connected
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUDIO  OUTPUTST I L L   MODE : AUTO
TV  MODE : Pan&Scan 4 : 3PARENTAL LOCK :LEVEL 8
AUD I O  OUTPUT
SELECT :  
SET : SET
END : ACT I ONLPCM(DVD): OFFDolby  Digital : Bitstream
dts : Bitstream
DRC : OFF
SURROUND : OFF
Press ACTION to redisplay DVD menu
and go to step 2 to setup another item.
Or, press 
ACTION three times to exit.