Home > Panasonic > Video Recorder > Panasonic Dvd Vcr Deck Pv D4762 Operating Instructions

Panasonic Dvd Vcr Deck Pv D4762 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Dvd Vcr Deck Pv D4762 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							41
    When   appears  on  the  screen  while
    a button is being operated, it means
    that  the  corresponding  operation  is
    prohibited  by  DECK  or  the  disc.
    • The  ANGLE  Indicator  lights  up  on
    DECK  when  a  scene  recorded
    at  different  angles  is  detected.
    • The  angle  number  can  be  set
    beforehand so that the angle is
    switched  whenever  the  ANGLE
    Indicator  lights  up.ANGLE  Indicator
    • DVD Karaoke (1 vocal)   VOCAL ON     VOCAL OFF
    • DVD Karaoke (2 vocals) VOCAL V1 +
     V2    VOCAL V1    VOCAL V2    VOCAL OFF 
    • Video CD                        LR     L     R
    1Press AUDIO  in  Play  mode
    to  display  the  audio  screen.
    Vocal Selection for Karaoke Discs (DVD/Video CD)
    DVDs  may  contain  scenes  shot  from  multiple  camera
    angles  allowing  the  same  scene  to  be  viewed  at  different
    angles. You can view these angles, if available, using the
    ANGLE  button.
    1
    Press ANGLE
    in Play mode to display the
    angle  selection  on-screen.
    • Display  disappears  after
    5  seconds.
    Multiple Angle Viewing (DVD only)
    2Press 
    to select the desired
    angle.
    2
    Press  (or  )
    to select as shown below,
    and
    press 
     (or ) to set.
    (DVD  only)
    Number  of  angle  being  played  back.
    ANGLE : 1ANGLE : 1
    SELECTSELECT:  :  SESET:T:SETSET
    SELECT :   SET : SET
    AUDIO:2 ENG VOCAL ONVOCAL ON
    You  can  enlarge  specific  portions  of  a  picture  and
    select  the  zoom  ratio  using  the  ZOOM  button  during
    DVD  playback.
    Press ZOOM  repeatedly  to  change  display
    as  follows.
    Picture Zoom (DVD only)
    • You can enlarge the center portion of the image
    to one of 2 magnifications.
    • The  subtitle  cannot  be  enlarged  nor
    can  it’s  position  be  changed.
    • The  picture  zoom  feature  does  not
    work with a Video CD.
    • During  picture  zoom,  “ZOOM1”  or
    “ZOOM2”  is  displayed  on-screen.
    • Zooming,  on  some  discs,  may  result
    in  poor  picture  quality,  or  may  not
    operate at all.
    Use the , ,  and   buttons to move the position
    up, down, left and right.
    Notes
    Notes*Important: if a remote control button does not work when pressed,
    press the DVD button on the remote and try the button again.
    AUDIO SET
    ANGLE SUB TITLE
    ZOOM
    SELECT DV D
      Operation 
    						
    							42For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
    Some  DVDs  have  more  than  one  title,  e.g.  movies.
    If  the  disc  offers  a  title  menu,  you  can  select  the  desired
    title  number. (Operation  may  vary  according  to  the  disc.)
    1
    Press TITLE*
    in  Play  mode
    to display the title screen.
    Title Menu (DVD only)
    DVDs  may  offer  a  special  menu.  This  menu  may  include
    guides  to  unique  contents,  audio/subtitle  languages,  etc.
    Although  contents  and  operation  may  vary,  the  following
    steps  show  basic  steps  for  using  the  menu.
    1
    2Press MENUin  Play  mode  to  display
    DVD  MENU.
    Press 
      or
    NUMBER  keysto select an item, and
    press 
    SET or PLAY
    to perform.
    DVD Menu (DVD only)
    2Press   orNUMBER  keys
    to select a title, and
    press 
    SET or PLAYto start playing.
    Disc  Operation  (continued)
    • “Pressing SET or PLAY” is
    not  necessary  when  using
    NUMBER  keys.
      
    T I TLE  MENU
    Cas t l es
    Love
     r s
    Dogs
    B
     i r ds
    T I TLE  MENU
    Cas t l es
    Love
     r s
    Dogs
    B
     i r ds
    DVD MENU
    3 . ANGLE
    1 . SUBT I TLE
    2 . AUD
     I O
    DVD MENU
    3 . ANGLE
    1 . SUBT I TLE
    2 . AUD
     I O
    B i rds
    of  the  world
    
    Repeat  step  2  if  there  is
    more  than  one  menu. • “Pressing SET or PLAY” is
    not  necessary  when  using
    NUMBER  keys.
    MENU
    SET STOP PLAY
    NUMBER
    keys
    TITLE
    CLEAR
    ACTION
    SELECT  
    						
    							43
    You  can  program  specific  tracks  and  order  of  play.
    Program Play (Video CD/CD)Ready  Checklist
    DECK  is  in  DVD  mode,  press  DVD.
    Video  CD  or  CD  is  inserted.
    1Press ACTION
    to display MENU.
    2Press to select
    “PLAY MODE,” and
    press 
    SETto  display.
    3
    Press to select
    “PROGRAM PLAY,”
    and
    press 
    SET to display.
    5
    Press  
    to select “START,” and
    press SET to start play
    of programs in the
    sequence  selected.
    • To  cancel, press STOPduring  play,  then pressCLEAR.
    4Press  
    to select a track
    number  (Track
    numbers  on  disc  are
    displayed.),  and
    press 
    SET.
    • Repeat  step  4  to  select  another  track.
    • The  selected  track  is  added  on  the  right  side.
    DVD  MA I N  MENU
    SELECT :  
    SET : SET
    END : ACT I OND I SC  LANGUAGES
    AUD I O  OUTPUT
    ST I L L   MODE : FIELD
    TV  MODE : Letterbox 4:3
    PARENTAL LOCK :LEVEL 8PLAY  MODE
    PLAY  MODE
    SELECT :  
    SET : SET
    END : ACT I ONPROGRAM  PLAY
    RANDOM  PLAY
    SELECT :  
    SET : SET
    END : ACT I ON
    D I SC PROGRAM
    161116 5 8
    2 7 12 17 15 6
    3 8 13 18 1 13
    4 91419 3 2
    5101520 2
         
    CLEAR  LAST
    CLEAR  ALLSTART PROGRAM  PLAY
    PROGRAM  PLAY
    SELECT :  
    SET : SET
    END : ACT I OND I SC PROGRAM
    161116 5 8
    2 7 12 17 15 6
    3 8 13 18 1 13
    4     9  14 19 3 2
    5101520 2
          
    CLEAR  LAST
    CLEAR  ALL START
    Notes
    Program Repeat Play
    (Video  CD/CD)
    4Press SET to enter Select mode.
    “REPEAT OFF” will flash.
    5Press  to select “DISC
    REPEAT.”
    (DECK  Information  Screen) (DECK  Information  Screen)
    1Do  operation  steps 1  through 5
    at left on this page.
    2Press DISPLAY  to  display  Disc
    Information  screen.
    (Disc  Information  Screen)
    3Press DISPLAY  to  display
    DECK  Information  screen.
    6Press SET to set mode. (“DISC
    REPEAT”  will  stop  flashing.)
    To cancel, select “REPEAT
    OFF” in step 5, then press SET.
    SELECT : 
    SET : SET END : D I SPLAY
    PLAY
    DISC REPEATDISC REPEATPROGRAM PLAY 
    SET : SET END  : D I SPLAY
    PLAY
    REPEAT  OFFREPEAT  OFFPROGRAM  PLAY
    SET : SET NEXT : D I SPLAY
    TRACKTRACK:    1V I DEO  CD
    PBC : OFF 1 : 35 : 12
    *Important: if a remote control button does not work when pressed,
    press the DVD button on the remote and try the button again.
    • Up  to  15  tracks  can  be  programmed.
    •“
      ”  or  “ ”  (depending  on  disc)  indicates  additional
    PROGRAM  PLAY  screen.
    Press 
       for  next  or  previous  screen.
    • To  clear  the  last  program  one  by  one
    Press 
       to  move  to  “CLEAR  LAST”  and
    press SET.  (Pressing CLEAR  on  remote  control
    also  clears  last  program.)
    • To  clear  all  programs
    Press 
       to  move  to  “CLEAR  ALL”  and  pressSET. (Programs  are  also  cleared  when  the  power
    is  turned  off  or  the  disc  is  removed.)
    DV D
      Operation 
    						
    							44For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
    Tracks  are  played  in  a  random  order.
    Random Play (Video CD/CD)
    Press  ACTION*
    to display MENU.1
    Disc  Operation  (continued)
    Pess to select “PLAY MODE,”
    and
    press 
    SETto  display.
    2
    DVD  MA I N  MENU
    SELECT :  
    SET : SET
    END : ACT I OND I SC  LANGUAGES
    AUD I O  OUTPUT
    ST I L L   MODE : FIELD
    TV  MODE : Letterbox 4:3
    PARENTAL LOCK :LEVEL 8PLAY  MODE
    Press 
    to select
    “RANDOM  PLAY,”  and
    press 
    SET
    to  begin  random  play.
    • To  cancel, press STOPduring play, then pressCLEAR.
    3
    PLAY  MODE
    SELECT :  
    SET : SET
    END : ACT I ONPROGRAM  PLAY
    RANDOM  PLAYRANDOM  PLAY
    *Important:
    If a remote control button does not
    work  when  pressed,  press  the
    DVD button on the remote and try
    the  button  again.
    SELECT 
    STOP
    CLEAR
    ACTION
    SET
    AUDIO
    CONTROL
    Ready  Checklist
    DECK  is  in  DVD  mode,  press  DVD.
    Setting the Sound Output Level
    Press AUDIO CONTROL repeatedly to change “ON” 
    ↔ ↔↔ ↔
    ↔ “OFF.”
    • “ON”  or  “OFF”  lights  up  on  Multi  Function  Display  (about  3  seconds)  when
    press  AUDIO  CONTROL.
    DVD /Video CD
    Music  CDAudio Control “OFF”
    Volume  level  is  low.
    Audio Control “ON”
    Volume  level  is  increased
    automatically  when  played  back.
    • “ON” is set ..... When  a  DVD  or Video  CD  is  played  back,  the  average  volume  is  increased.
    • “OFF” is set .... The volume level recorded on the disc is played back just as it is.
    • When  audio  equipment  is  connected,  setting  the  Sound  Output  level  to  “OFF”  is  recommended.
    • If  the  sound  becomes  abnormal  while  playing  a  disc,  set  the  Sound  Output  level  to  “OFF.”
    Notes
    Audio  recorded  on  a  DVD  or Video  CD  often  incorporates
    a  dynamic  range  of  sound.
    This  means  that,  when  compared  to  a  music  CD,  etc.,
    the  average  volume  is  generally  lower  and  the  peaks
    may  be  higher. This  unit  can  be  set  so  that  the  average
    volume  is  increased  automatically. 
    						
    							45
    SET : SET NEXT : D I SPLAY
    TRACK:12V I DEO  CD
    PBC : OFF 0 : 12 : 34
    SELECT :
    SET : SET NEXT : D I SPLAY
    T I TLE : 12 DVD
    CHAPTER:110:12:34
    1Press DISPLAY in Play or Stop mode
    to  display  “On-Screen  Displays.”
    When DISPLAY  is  pressed,  On-Screen  Displays  show
    disc  information  (title/chapter/track  number,  elapsed
    playing  time)  and  DECK  information  (repeat  play,  play
    mode).
    • Each press  of 
    DISPLAY  changes  the  on-screen
    display  as  follows.  (refer  to  p.  46.)
    DISPLAY button does not function while DVD
    TITLE  MENU  is  displayed.
    Note
    3
    Press 
    to select the setting, and
    press 
    SET.
    To make corrections,
    press 
     and SET
    repeatedly to move to
    the error, then correct.
    •  Pressing   is  effective
    for elapsing time
    instead  of  the  above
    buttons. Press 
    repeatedly  to  delete  the
    error,  then  correct. • For  some  functions  the
    setting  will  be  registered
    immediately without
    pressing 
    SET.
    • When  numbers  are
    displayed (e.g. title
    number), 
    NUMBER  keysare also available.
    To return to normal
    screen,
    press 
    CLEAR orDISPLAY  repeatedly.
    
    2Press  (or  )
    to select 
    an item, and
    press SET.
    
    Notes
    • When DISPLAY  button  is
    pressed  during  playback  of  a
    Video  CD  with  Playback  control,
    NUMBER  keys  are  not  available
    on  the  displayed  screen.  In  this
    case,  press 
    DISPLAY  again  to
    remove  the  displayed  screen.
    • When 
      appears  on  the  screen
    while a button is being operated,
    it  means  that  the  corresponding
    operation is prohibited by DECK
    or  the  disc.
    SET NUMBER
    keys
    DISPLAY
    SELECT 
    DVD  Operation  using  On-Screen  Displays
    Selected  disc  information
    Selected  DECK  information
    Normal  Screen
    CLEAR
    SELECT :
    SET : SET NEXT : D I SPLAY
    T I TLE : 12 DVD
    CHAPTERCHAPTER:24240:12:34
    SET : SET NEXT : D I SPLAY
    TRACK:17V I DEO  CD
    PBC : OFF 0 : 12 : 34
    Ready  Checklist
    DECK  is  in  DVD  mode,  press  DVD.
    DV D
      Operation 
    						
    							46For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
    SELECT :  
    SET : SET NEXT : D I SPLAY
    TITLE:1DVD
    CHAPTER : 12 1 : 12 : 55
    eoeIupPrg12m7Iyf27.Iu7nAbrPP7Ie2fpvgFfILbm7127yPjT
    eP1g2vPjIePfbr2p12m7fImNIPgb4Iu7nAbrPP7Ie2fpvgF
      
    Disc information screen (for DVD)1. TITLE No.• Change  the  No.  by pressing * or NUMBER  keys,  and press SET.2. Chapter No.• Change  the  No.  by pressing  or NUMBER  keys,  and press SET.3. Disc currently being played
    4. Elapsed playing time
    The  screen  may  be  changed  by  selecting  the  elapsed  time.
    • Change  the  elapsed  time  by pressing NUMBER  keys.
    e.g., press 0 - 1 - 2 - 3 - 4 - 5 for 01 : 23 : 45.
    • This  function  does  not  work  with  some  discs.
    4 1
    23
      
     Disc information screen (for Video CD/ CD)A. Track No.• Change  the  No.  by pressing  or NUMBER  keys,  and press SET.B. Playback control ON/OFF[Video  CD  with  playback  control  only]
    C. Disc currently being played
    D. Elapsed playing time
    • Track  No.  and  the  elapsed  playing  time  are  not  displayed  during  play  started  from  menu  of  Video
    CDs  with  playback  control.
    • When 
     appears on the screen while a button is being operated, it means that  the  corresponding
    operation  is  prohibited  by  DECK  or  the  disc.
    O F F Video  CD  menu  play  is  cleared.  ON Video CD menu play is displayed.
    Video CD    CD
    Note
    SET : SET NEXT : D I SPLAY
    TRACK:    1V I DEO  CD
    PBC : OFF 1 : 35 : 12A
    BC
    D
    a. Repeat Play
      
     DECK information screen (for DECK)• Change  the  desired  mode  during  play  by pressing ,  and press SET.
    b. Play mode [Video CD/ CD only] (See p. 43 or 44.)
    Video  CD/CD TRACK  REPEAT DISC  REPEAT REPEAT  OFFDVD CHAPTER  REPEAT TITLE  REPEAT REPEAT  OFF
    PROGRAM  PLAY program  play
    RANDOM  PLAY random  play
              
     ----normal  play
    SELECT : 
    SET : SET END : D I SPLAY
    PLAY
    CHAPTER REPEAT 
    SET : SET END  : D I SPLAY
    PLAY
    DISC  REPEAT
    RANDOM  PLAY
    a
    b
    TITLEchapterchapter
    chapterCHAPTER REPEAT
    TITLE REPEAT
    NORMAL PLAY
    CURRENT PLAYBACK POSITION
    tracktrack
    track
    TRACK REPEAT
    DISK REPEAT
    NORMAL PLAY
    CURRENT PLAYBACK POSITION
    •  CHAPTER/TITLE  REPEAT  PLAY  (DVD)• TRACK/DISC  REPEAT  PLAY  (Video  CD/CD)
    For  your  reference
    • For repeat play in VCR mode, see p. 36.
    Note 
    						
    							47
    DV D
      Operation
    MP3 Playback Operation
    *Important:If a remote control button does not work
    when pressed, press the DVD button on
    the remote and try the button again.
    1Press POWER on the remote or DECK.
    Press 
    OPEN/CLOSE,
    and then place a MP3 disc into the disc tray.
    Press 
    OPEN/CLOSE to close.
    2
    3
    MP3 Playback
    MP3  MENU  is  displayed  and  playback  is
    started  automatically. (The  MP3  CD  directory  is
    displayed.) You can use this unit to play MP3 format audio recorded for
    personal  use  with  a  computer  etc.  onto  a  CD-R  or  CD-RW.
    Play  may  not  be  possible  in  some  cases  due  to  the
    condition  of  the  recording.
    PLAY
       PLAY   MODE : NORMAL
    00 :  00  :  00           MP3  MENU  ROOT                   . .               
      VAVA                       END_WALTZ
      TECHNO             DD_CUB I C
      POPS                  NOCTURNE 
      JAZZ                   NORN
     
    ROOT
    VA
    TECHNO
      
    POPS
    JAZZ
    END_WALTZ
    DD_CUB I C 
    N
    OCTURNE
    NORN
    Function
    StatusCounter
    PLAY  MODE
    Folder  area
    File  area
    Parent
    folder
    (The currently
    displayed folder
    turns green)(The selected
    MP3 file/folder
    is displayed
    with a cursor.)
    (The  MP3  CD  directory  structure
    displayed  in  the  above  example  OSD
    is shown in the diagram at left.)
    
    :MP3  file
    :Folder
    :Parent  folder
    4
    Forward/Reverse  Search
    Press FF/SLOW+  or REW/SLOW-  during  play.
    Press PLAY to  release.
    • Search  speed,  slow  at  first,  increases  with  each
    additional press of the button up to 4 levels.
    Forward/Reverse  Track  Skip
    Press 
    SKIP | or | SKIP during play.
    Each  press  skips  a  track.
    • If  pressed  within  first  3  seconds  of  playback,  skips
    to  the  previous  track.  If  over  3  seconds,  returns  to
    first  of  that  track.  (|
      SKIP  only.)
    • Only the SKIP | or | SKIP button can be used
    for  track  skip  selection  during  playback.
    Place unit into Stop mode before performing folder/
    file  selection  (see  above  right.)
    Press STOP to stop playing.
    5
    Press OPEN/CLOSE to eject the disc.The  MP3  MENU  is  closed  automatically.
    [PLAY MODE]
    NORMAL:
    All  MP3  files  are  selected  and
    played  back  one  time  only.
    SINGLE REPEAT:
    The selected MP3 file is
    played  back  repeatedly.
    FOLDER REPEAT:
    The MP3 files contained in
    the  selected  folder  are  played
    back  repeatedly.
    However,  folders  below  the
    selected  folder  are  not  played
    back.
    DISC REPEAT:
    All  MP3  files  are  played  back
    repeatedly. MP3 playback (During STOP mode)
    1)Press 
     to select an MP3 file ().
    2)Press 
    SET or PLAY to start playback.
    Select folder (During STOP mode)
    1)Press 
     to select a folder ().
    2)Press 
    SET to display files/folders
    contained  in  the  folder.
    Select parent folder (During STOP
    mode)
    1)Press 
     to select a folder ().
    2)Press 
    SET to make changes to
    the  previous  directory  display.
    Select PLAY MODE (During STOP
    mode)
    1)Press 
      to move cursor to PLAY
    MODE.
    2)Press 
      to  select  the  desired
    PLAY MODE (see below).
    • Folder  area  operation  cannot  be  done.
    Only  file  area  operation  is  possible.
    Note 
    						
    							48For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
    1
    DVD Lock (DVD only)
    LEVEL 0 : LOCK  ALL,  Playback  of  all  DVDs, CDs  and
    Video CDs is prohibited.
    (Use  to  prohibit  play  of mature  theme DVDs  not
    encoded  with  rating  level.)
    LEVEL 1 : mature  theme DVDs
    LEVEL 2 : DVDs  expressly  for  children  can  be  played  back.
    LEVEL  3  to  7  : DVDs  for  general  audiences/children  can  be
    played  back.  (DVDs with  mature  content
    are  prohibited.)
    LEVEL 8 : NO  LIMIT:  (Factory  preset)
    All  DVDs  can  be  played  back.
    You can prevent playback of DVDs of a specific
    rating  level  which  may  be  unsuitable  for  children.
    • Some  DVDs  are  encoded  with  a  rating  level.  If  the  disc
    rating  is  higher  (stricter)  than  the  one  you  preset,
    playback will be prohibited.
    
    After DVD Lock is set and a
    blocked  DVD  is  played,  this
    message  will  appear.
    The message may differ
    depending  on  the  disc.
    To continue viewing a blocked
    program for now,
    Press 
     to select “YES” and
    SET. Then, enter your 4 digit
    secret code. When “NO” is
    selected,  blocked  programs
    cannot  be  viewed.
    DVD Lock Feature
    SELECT : 
    SET : SET END : D I SPLAY,
    YOUR  SELECT I ON  EXCEEDS  THE
    PLAYER  S  RAT I NG  L I M I T.
    DO  YOU  WANT  TO  CHANGE  THE
    LIMIT?
    YES
    YESNO
    Discs not encoded with rating
    level will play even if the jacket
    states it is for mature
    audiences. For these discs, the
    DVD Lock Ratings will not work.
    Caution
    4
    Press  
    to select rating level, and
    press SET
    to select “LOCKED” or
    “UNLOCKED.”
    5Press ACTION  twice
    to end setup.
    A  4-digit  code  must  be  entered  to  view  a  blocked
    program  or  change  rating  settings.
    Press ACTION*
    to display MENU.
    Press 
    to select “PARENTAL LOCK,”
    and
    press 
    SET to display.
    2
    1)Press NUMBER  keys
    to enter your secret code.
    2) Enter same secret code
    again  for  confirmation.
    3)Press 
    SET to display.
    • Step  2)  not  necessary  when
    changing  rating  or  secret
    code.
    • Take  care  that  you  are  not
    observed  entering  the
    secret  code.To Make CorrectionsPress  repeatedly to
    move  the  cursor.
    Press 
    NUMBER keys to
    make  the  correction.
    Change your secret code• You  will  need  your  current  code.
    Do step 1 ~ 2 left.
    Enter  current  secret  code.
    Press 
    CLEAR  to  clear  the  code.
    Do  step  4  to  enter  new  code.
    • DO  NOT  forget  your  secret  code.
    Note
    END       : ACT I ONENTER  : 0 - 9 
    ENTER  4-D I G I T   CODE----  3
    DVD  MA I N  MENU
    SELECT :  
    SET : SET
    END : ACT I OND I SC  LANGUAGES
    AUD I O  OUTPUT
    STILL  MODE : FIELD
    TV  MODE : L e t terbox 4:3
    PARENTAL LOCK   : LEVEL 8
    PARENTAL LOCK   : LEVEL 8
    *Important:If  a  remote  control  button  does  not  work  when
    pressed,  press  the  DVD  button  on  the  remote
    and  try  the  button  again.
    Ready  Checklist
    DECK  is  in  DVD  mode,  press  DVD. 
    						
    							49
    Disc Languages (DVD only)
    To select and set the language of the audio
    soundtrack,  subtitles,  or  title/DVD  menus  for  all  discs
    to be played.
    “AUDIO” selections(Factory  preset:  English)To  select  the  audio  soundtrack  language.English/Spanish/French/Japanese
    Original:  Original  disc  language
    OTHER ✱✱✱✱:  Other  language  selection*
    1
    “SUBTITLE” selections(Factory  preset:  AUTO)To  select  the  subtitle  language.AUTO:Same  language  selected
    for “AUDIO”
    •If  language  set  for  “AUDIO”  is  used  in
    playback,  subtitles will  not  appear.
    •If  another  language  is  used  during
    playback,  the  subtitles  will  appear
    in  the  language  selected  at  “AUDIO”
    setup.
    English/Spanish/French/Japanese
    OTHER ✱✱✱✱: Other  language  selection*
    1
    “MENUS” selections(factory  preset:  English)
    To select the language used in title
    menus  or  DVD  menus.
    English/Spanish/French/JapaneseOTHER ✱✱✱✱: Other language selection*1
    To enter OTHER ✱✱✱✱
          
     code
    number,
    Press NUMBER  keys  (Please  refer  to
    language  codes  on  p.  52).
    To  make  corrections, press 
    repeatedly  to  delete  language  code
    number,  and  correct.
    Settings for DVD Operation
    1
    2
    Once  initial  settings  are  done,  they
    remain  in  memory  (even  after  power  off)
    until changed. This means DECK will
    operate  under  the  same  conditions
    (especially  DVDs)  each  time.
    DISC LANGUAGES (See below)All  languages  offered  on  the  disc  can  be  set.
    If the language not offered is set, the original disc
    language will be selected.
    AUDIO OUTPUT (See p. 50.)You  can  set  the  audio  output  that  comes  from  the
    digital audio output terminal.
    STILL MODE (See p. 51.)To  select  “FIELD”  (Field  still)  or  “FRAME”  (Frame
    still)  to  prevent  jitter  or  make  small  text  or  fine
    patterns clearly visible in a still picture. When
    “AUTO”  is  set  “FIELD”  or  “FRAME”  is  selected
    automatically.
    TV MODE (See p. 51.)To  select  whether  the  video  material  for  a  wide-
    screen  will  be  played  back  in  the  Pan  &  Scan  style,
    Letterbox  style  or  16  :  9  style.
    3
    Press 
    to select
    “DISC LANGUAGES,”
    and
    press 
    SETto  display  screen. Press 
    ACTION
    to  display  MENU.
    Press 
    to select an item, and
    press 
    SET.
    DVD  MA I N  MENU
    SELECT :  
    SET : SET
    END : ACT I ONDIDISC  LANGUAGESSC  LANGUAGESAUD I O  OUTPUT
    ST I L L   MODE : AUTOTV  MODE : L e t t e rbox 4:3PARENTAL LOCK :LEVEL 8
    DVD  MA I N  MENU
    SELECT :  
    SET : SET
    END : ACT I ONDIDISC  LANGUAGESSC  LANGUAGESAUD I O  OUTPUT
    ST I L L   MODE : AUTOTV  MODE : L e t t e rbox 4:3PARENTAL LOCK :LEVEL 8
    Press 
    to select an item, and
    press 
    SET  repeatedly
    for  desired  language.
    (Please  refer  right.)4
    D I SC  LANGUAGES
    SELECT :  
    SET : SET
    END : ACT I ONAUAUDIDIO: : EnglishEnglishSUBT I TLE : AUTO
    MENUS : English
    5
    Press ACTION  to  redisplay  DVD  menu
    and go to step 2 to setup another item.
    Or, press 
    ACTION twice to exit.
    *1If  the  selected  language  is  not  offered,
    the  original  disc  language  is  selected.
    SET ACTION
    SELECT 
    NUMBER
    keys
    CLEAR
    Ready  Checklist
    DECK  is  in  DVD  mode,  press  DVD.
    DV D
      Operation 
    						
    							50For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
    • Make  settings  according  to  amplifier
    connected  to  optical  audio  output  as  shown
    in  above  table.
    • When  a  dts  decoder  is  not  connected,  to
    enjoy  dts  DVD,  please  select  audio  output
    other  than  dts  at  the  dts  DVD  menu  screen.
    Otherwise,  there  will  be  no  sound.
    *1 Audio  Output  2  from  DECK  is  converted  to
    48 kHz/16 bit in addition to audio from
    digital audio output.
    To  enjoy  high  quality  sound  at  48  kHz/20
    bit  /24  bit  or  96  kHz,  connect  the  amplifier
    or  decoder  directly  to  the  Audio  Output  2
    connectors,  not  to  the  Digital  Audio  Output
    connector.  [Select  “OFF”  at  the  “LPCM
    (DVD)”.]
    *2 When connecting an amplifier (with an
    optical  digital  input  connector)  which  does
    not contain the Dolby Digital or dts
    decoder,  be  sure  to  select  “OFF”.
    If  “Bitstream”  is  selected,  starting  DVD  play
    may  cause  such  a  high  level  of  noise  as  to
    be  harmful  to  your  ears  and  damage  the
    speakers.
    *3 When  a  dts  decoder  is  connected,  please
    select  “Bitstream”  in  “dts”.  If  “OFF”  is
    selected,  there  will  be  no  sound.
    Audio  Output
    Select the digital output to be output from the optical
    digital audio output connector of DECK.
      
     “LPCM (DVD)” selectionsOFF:Linear  PCM  of  less  than  48  kHz/16  bit  is
    output. When  playing  DVDs  recorded  in
    linear  PCM  of  over  48  kHz/20  bit  or  96  kHz,
    no  digital  audio  is  output.  (Factory  preset)
    PCM:When  playing  DVDs  recorded  in  linear  PCM
    of 48 kHz/20 bit/24 bit or 96 kHz, digital
    audio  converted  to  48  kHz/16  bit  is  output.
    (Digital  output  of  PCM  audio  is  restricted  to
    48  kHz/16  bit  or  below  for  copyright
    protection.)
      
     “Dolby Digital” selectionsBitstream:Dolby  Digital  bitstream  (1ch-5.1ch)  is
    output.  (Factory  preset)
    OFF:No output.
      
     “dts” selectionsBitstream:dts  bitstream  is  output.  (Factory preset)
    OFF:No  output.
      
     “DRC (Dynamic Range Compression)” selectionsOFF:Nor mal  audio  range  is  selected.  (Factor y
    preset)
    ON:For  dynamic  sound  even  at  low  volume,  this
    is useful for late-night listening. [Dolby Digital
    DVDs  only].
      
     “SURROUND” selectionsSurround  Sound  creates  the  effect  of  sound  coming
    from  non-existent  rear  speakers  even  when  only
    connected  to  a  2-channel  stereo  system.
    OFF:No  Surround  Sound  effect.  (Factory  preset)
    ON:Surround  Sound  effect.
    Press 
    to select an item,
    and
    press 
    SET
    repeatedly  for
    output.  (See  below.)
    Press to select
    “AUDIO OUTPUT,”
    and
    press 
    SET
    to  display  screen.
    1
    Settings for DVD Operation (continued)
    3 2
    4
    • Turn  off  other  surround  effects  when  using
    this  surround  effect.
    • For  optimum  effect,  the  distance  between
    DECK and the listener should be about 3 or 4
    times  the  distance  between  the  right  and  left
    front  speakers.
    Notes
    Recommended  setting
    LPCM
    (DVD)
    OFF
    PCM*
    1
    PCM*1
    PCM*1
    Dolby
    Digital
    OFF
    OFF*
    2
    Bitstream
    Bitstreamdts
    OFF
    OFF*
    2
    OFF
    Bitstream
    No amplifier is connected
    AV amplifier (with digital
    audio input connector)
    without Dolby Digital/dts
    decoder
    AV amplifier including
    Dolby Digital decoder
    AV amplifier including
    Dolby Digital/dts decoder
    *3
         Type  of  amplifier
          to  be  connected
    DVD  MA I N  MENU
    SELECT :  
    SET : SET
    END : ACT I OND I SC  LANGUAGES
    AUDIO  OUTPUT
    ST I L L   MODE : F I LED
    TV  MODE : Letterbox 4:3PARENTAL LOCK :LEVEL 8
    AUD I O  OUTPUT
    SELECT :  
    SET : SET
    END : ACT I ONLPCM(DVD)LPCM(DVD): OFF: OFFDolby  Digital : Bitstream
    d t s : OFF
    DRC : OFF
    SURROUND : OFF
    Press ACTION  to  redisplay  DVD  menu
    and go to step 2 to setup another item.
    Or, press 
    ACTION twice to exit. Press 
    ACTION*
    to  display  MENU.
    Ready  Checklist
    DECK  is  in  DVD  mode,  press  DVD. 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Dvd Vcr Deck Pv D4762 Operating Instructions