Panasonic Dvd Vcr Deck Pv D4762 Operating Instructions

							21
Insert a tape with a record tab (p. 6).
1• DECK  power  comes  on.
The VCR mode and “VCR” indicator light up
on  Multi  Function  Display.
54 2
3
Press CH , or NUMBER keys
to select the channel.
• For  “LINE”  input,  see  p.  39.
• If  channel  is  over  100,  press  100  key  then  press
the remaining 2 digits.
Press  SPEED
to select the record speed (p. 6).
SP = Standard Play            LP = Long Play
SLP = Super Long Play
Press  REC
to start recording.
(The VCR REC indicator lights up on Multi Function
Display),
• To  edit  out  unwanted  scenes, press  PAUSE/STILL
to  pause,  and  again  to  resume  recording.
• You  cannot  view  another  channel  during  recording.
Press STOP
to  stop  recording.
•It  is  not  possible  to  record  from  DVD/  VideoCD/  CD  to  VHS  tape  using  DECK.
• Watching  one  channel  and  recording  another
is  not  possible  when  using  Cable  Box  or
DSS Receiver.
• After  5  minutes  in  Pause  mode,  DECK  stops  to
protect  a  tape  and  video  heads.
• Speed  appears  on-screen  and  on  Multi  Function  Display.
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Record on a Tape
Remove  loose  or  peeling
labels  from  tapes to  prevent
tape  jam.
Multi  Function  Display
Record using DECK buttons
4
2
Select
Channel.
VCR/TV
Press  REC
to  start
Recording.
Press  STOP/EJECT  to  stop. This  video  recorder,  equipped  with  HQ
(High  Quality)  system,  is  compatible
with  existing VHS  equipment.  Only  use
tapes  with  the 
  mark.  Only  tapes
tested  and  inspected  for  use  in  2,  4,  6,
and  8  hour  machines  are
recommended.
Normal Rec0:301:00
1:302:003:004:00
1Insert  a  tape.
Note
Notes
Basic
Operation
One Touch Recording (recording in progress),➛ ➛➛ ➛
➛Press  REC  repeatedly  to  set  the  recording  length
➛ ➛➛ ➛
➛(30 min. ~ 4 hours).
•  DECK  shuts  off  after  the  preset  record  length.
Record one station, watch another,➛ ➛➛ ➛
➛press VCR/TV
(“VCR”  goes  out  on  Multi  Function  Display),
➛ ➛➛ ➛
➛select  channels  at  TV  (recording  continues).
Select Channels at DECK (In STOP or
REC. PAUSE mode),
➛ ➛➛ ➛
➛press VCR/TV
(“VCR”  lights  up  on  Multi  Function  Display),
➛ ➛➛ ➛
➛select  channels  at  DECK.
Play a disc while recording a tape.➛ ➛➛ ➛
➛insert  a  disc  during  recording,
➛ ➛➛ ➛
➛press DV D, and then press PLAY. 
						

							22For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Basic  DVD  Operation
Ready Checklist
All connections are made. (pp. 12 ~ 15)
DECK is plugged in.
If DECK is connected to an audio amplifier,
turn  the  stereo  system’s  power  on.
*1Interactive  DVD...
May  include  multiple  camera  angles,
stories,  etc.
*
2Video  CD  with  playback  control...
Particular  scenes  or  information  can  be
interactively  selected  from  a  menu  that
appears  on  the  screen.
Operation using DECK buttons
Press  PLAY. Insert  a  disc.
Press
OPEN/CLOSE.
Press  STOP.
6Press
POWER
4
1
33, 7
OPEN/
CLOSE
   10 MENU
SETFF/
SLOW+
STOP
RETURN
POWER
REW/
SLOW-
NUMBER
keys
TITLE PLAYDVD
PAUSE/
STILL
SELECT 
SURROUND
SKIP SKIP 
5Press   orNUMBER  keys (see
below) to select title,
and
press 
SET to play.
1Press POWER* on the remote or DECK.
Press
 DVD to select DVD mode.
Press 
OPEN/CLOSE,
and then place a disc into the disc tray.
2
3• If  a  disc  is  already  inserted,  go  to  step  4.
(Depending  on  the  disc,  playback  may
start  automatically.)
Press PLAY to start playing.
Disc  tray  closes  automatically.
4
12
If  an  interactive  DVD*1 or
a  Video  CD  with  playback
control*
2  is  used  and  TITLE
MENU  appears,  go  to  step  5.• You  may  also  close  tray  by
pressing 
OPEN/CLOSE.
• Data reading time differs with
each  disc.
Using  NUMBER  keys  starts  playing  automatically.
 1 digit number 1  •••  1
2 digit number 12 •••    10 1 2
3 digit number 123  •••100 1 2 3
Press 
SKIP |  or  |  to  go  to  next  or  previous
menu  screen.
• SKIP  function  not  available  with  all  discs.
Please  refer  to  disc  jacket  for  operation  information.


To return to menu (play stops)Press TITLE, MENU,  or RETURN.  (DVD)
Press RETURN.  (Video  CD)
Press STOP to stop playing.6
7Press OPEN/CLOSE to eject the disc.
• Hold  disc  by  its  edges
only  (p.  4)  with  printed
side  up  and  use  guides  to
place  into  tray.
Use     3”(8  cm)
or      5” (12  cm)  disc.
2
1
CLOSE
READING
T I TLE  MENU
Cas t l es
Love
 r s
Dogs
B
 i r ds
T I TLE  MENU
Cas t l es
Love
 r s
Dogs
B
 i r dsDogs
of  the  world 
						

							23
• Please  read  the  disc  jacket  for  operation
information.
• If a single sided disc is placed in upside
down,  “PLEASE  CHECK  THE  DISC,  AND
FOR  STAINS  OR  SCRATCHES  ON
DISC”  is  displayed.
• Remove  disc  and  press  DECK  POWER
off when not in use.
• Disc  continues  to  rotate  with  menu
displayed  even  after  play  is  done.
Press  STOP  to  clear  menu  display  when
finished with menu.
Forward/Reverse Scene Search
Press FF/SLOW+ or REW/SLOW-during  play.
Press 
PLAY to release.
• Starting  forward/reverse  search  during  play
started  from  menu  on  Video  CDs  may  recall
menu.
• Search  speed,  slow  at  first,  increases  with  each
additional  press  of  the  button  up  to  5  levels.
Forward/Reverse Chapter/Track Skip
Press SKIP | or | SKIP during play.
Each press skips a chapter (DVD) or
track  (Video  CD/CD).
•Pressing  |  SKIP once  midway  through  a
chapter/track  returns  to  the  start  of  that
chapter/track.  Each  additional  press  skips
back  one  chapter/track.
•Pressing SKIP |  or |  during  play  started
from  menu  on  Video  CDs  may  recall  menu.
Still Picture or Pause
Press PAUSE/STILL during play.
Press 
PLAY to release.
•DVD/Video  CD :DECK will enter still picture
mode.
•CD : DECK will enter pause mode.
Frame by Frame Picture
(DVD/Video CD)
Press 
PAUSE/STILL in still mode.
Press 
PLAY to release.• Each  press  advances  picture  one  frame.
• Hold  button  down  for  consecutive  frame  advance.
• Whether  pictures  are  advanced  by  “FRAME”  or
“FIELD”  is  selected  automatically.  (See  p.  51)
Slow Motion Picture (DVD/Video CD)
Press 
FF/SLOW+ or REW/SLOW-
in  still  mode.
Press 
PLAY to release.
• Slow  motion  speed,  slow  at  first,  is  increased
with each additional press of the button up to
5  levels.
• Reverse  slow  motion  is  not  available  for  Video
CDs.
• When 
  appears  on  the  screen  while  a  button
is being operated, it means that the
corresponding  operation  is  prohibited  by  DECK
or  the  disc.DECK  memorizes  the  point  where  STOP  is
pressed  ( 
  flashes  on  screen).
Press 
PLAY  to  resume  play  from  this  point.
Pressing STOP  again  or  opening  the  tray
cancels  RESUME,  however,  RESUME  is  not
canceled  when  power  is  turned  off  and  on.
• RESUME  works  only  with  discs  for  which
elapsed play time is displayed during play.
Resume Function
Notes
Power  turns  off  after  DECK  has  been  in
Stop  mode  (DVD)  for  about  5  minutes.
Auto-Power  Off  Function
1. Do  steps  1-4  (previous  page).
When  menu  appears, press STOP.
2.Press 
NUMBER  keys  to  select  desired
track  (play  begins).
• Check  disc  for  track  numbers.
• Press  “1”  to  start  at  beginning  of  disc.
To Resume Menu use,
Press STOP  and press  PLAY,  then  the
menu will be displayed.
Now,  go  to  step  5  (previous  page).
Enjoy Video CDs featuring
playback control without using
menus (Video CDs only)
*Important:If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
Surround Sound System
Press SURROUNDto  set  Surround  sound.
To  cancel,
press 
SURROUND.
• Surround  sound  effects  is  available  in
DVD mode only.
Note
SURROUND ON
SURROUND OFF
Reverse  Skip                  Forward Skip Current  playback  position
Chapter/Track Chapter/Track Chapter/TrackChapter/Track
Basic
Operation 
						

							24For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Timer  Recording
ADD/DLT
Press  PROG*
to  display  Program.
Press  PROG
to  end  programming.
3 1
DAILY
131
31
12
SELECT     /      
Selection Order
WEEKLY
(SAT)WEEKLY
(MON) WEEKLY
(SUN)
14
Example
Today
2) To set remaining items,
press 
to select and
press SET
to set START/ STOP times,
CH(channel)  or  LINE  input
(p. 39), and tape speed
(SP, LP, SLP).
To Enter More Programs,
press 
to select and
press SET
to set an unused program
number,  and  then  repeat
step 2.
Or
Press  PROG
to exit.1) To set record DATE,
press 
 to select:
1~31= one time, or
DAILY= MON~ FRI, or
WEEKLY= same time
each  week  and
press SET.
• See  selection  order  left.
SELE CT  START  DATE
13  SUN  SUN --:--  --:--   --TODAY DATE START ST
OPCH
SLP
SELE
CT :         SET       : SET    END       :  PROG   
- - - - - - - - -- - - - - - - -- - - - - - - 
DT   START     STOP    CH   SPD13   1013   10 : 0000 P  1212 : 0000 P   02         SP--  -- : --     -- : --  --    --
--  -- : --     -- : --  --    --
--  -- : --     -- : --  --    --CANCEL         : ADD / DLT  SELECT 1-8 :         ENTER          : SET    EXIT             : PROG  
POWER
SET
PROG
SELECT 
Ready Checklist
All connections are made (pp. 12 ~ 15).TV and DECK are plugged in.Clock  set  correctly.Tape  has  rec.tab.  (p.  6)Remote  is  in VCR  mode.  (Press VCR.)Sufficient tape remaining for rec time.
• The  “Timer”  Indicator  lights  up  on  DECK.
• You  can  do Timer  Recording  with  the  power  on  or  off.
• “TIMER  REC  WILL  START  SOON” appears  on-screen  for  2  minutes
before Timer  Recording  starts.  If  DECK  is  in  DVD  mode,  no  message
appears, but  the VCR  REC  Indicator,  the VCR  mode  indicator  and
“REC”  will  flash  on  Multi  function  Display.VCR  REC  Indicator
VCR  mode  Indicator
A
M VCR
VCR RECDVD
ANGLEVCR
Hi-FiTIMER• 
• • 
• 
,yv12I Uy7b12m7I e2fpvgF
TIMER  Indicator
2 
						

							25
To Replace program...
To Clear program...
Review,  Replace  or  Clear  Program  Contents:
(Recording is not in progress)
or
Important notes when using DSS Receiver
• When  recording  programs  via  DSS  Receiver,  DSS  Receiver  must  be  left  on.
• When  recording  programs  via  an  antenna  or  cable,  DSS  Receiver  must  be  turned  off.
CANCEL   : ADD / DLT SELECT   1-8 :               
ENTER     : SET
EXIT         : PROG
DT   START     STOP    CH   SPD  7     9  7     9 : 0000A  12  12 : 0000A   0808      SP  8   10 : 00P  12 : 00P    02     SP10     8 : 00P    9 : 00P   10     SP
SU     9 : 00P  10 : 00P    L1     LP
CANCEL   : ADD / DLT SELECT   1-8 :               
ENTER     : SET
EXIT         : PROG
DT   START     STOP    CH   SPD--  -- : --    -- : --   --   --  8   10 : 00P  12 : 00P    02     SP10     8 : 00P    9 : 00P   10     SP
SU     9 : 00P  10 : 00P    L1     LP
Press  ADD/DLT. *Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
1
2
3
Press to  select  number  and
press SET
to  display.
To cancel a Timer
Recording in progress...
Repeat Step 2 (p. 24)
to set new programs.
Press  PROG
to  end  the  programming.Hold down STOP on VCR mode for
a few seconds to cancel the Timer
Recording.
 (The “TIMER” Indicator goes out
on  Multi  Function  Display.)
• Any  future  daily  or  weekly  recording
will  be  performed  as  programmed.
7  SUN   9:00A00A  12: 00A  08 08 TODAY----------------------------------------
DATE       START       STOP       CH
SPSESELE CT  START  DATE
SELECT     :         SET           : SET            BACK :END            : PROG   
Notes
• If  you  are  using  a  Cable  Box,  the VCR’s  channel  for Timer  Recording  must  be  set  to
the  Cable  Box  input  channel  and  Cable  Box  must  be  manually  set  to  the  desired
channel.  Cable  Box  power  must  be  left  on.
•2  minutes  before  Timer  Recording  is  performed, “PLEASE  PREPARE  FOR TIMER
REC”  appears  and Timer  Indicator  flashes.
Be  sure  a  cassette  with  record  tab  is  loaded  and  DECK  is  in  Stop  mode.
• If  a  power  interruption  occurs  while  programming  the  timer,  the  timer  program(s)  may  be
canceled.  If  “TIMER  PROGRAMS  WERE  LOST  DUE  TO  POWER  INTERRUPTION”
appears  on-screen,  please  re-enter  the  timer  programs.
• If  the  star t  time  for Timer  Recording  comes  up  during  recording  and  playing  back,
Timer  Recording  will  not  be  performed.
Press  PROG
to display Program List.
4
VCR
  Operation 
						

							26For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
MONO broadcast
Normal  monaural  sound  broadcast.
SAP broadcast
Secondary  Audio  Program  (sub
language)  broadcast.  Select  SAP
audio  mode  for  the  sub  language.
MTS Stereo broadcast
Multi-channel  Television  Sound
Stereo broadcast. Select STEREO
audio  mode.
• If  stereo  broadcast  is  weak  and
display  flickers,  select  MONO  audio
mode  for  possible  better  results.
MTS Stereo and SAP broadcast
Multi-channel  Television  Sound
Stereo  (main  language)  and
Secondary  Audio  Program  (sub
language)  broadcasts  are  being
received  simultaneously.
Select STEREO or SAP audio mode. The  following  are  possible  audio  broadcast  types  and  on-
screen  displays.
The  signal  being  received  is  indicated  with  an  “
”  mark
while  the  selected  audio  mode  is  indicated  with  an  arrow.
Receivable Broadcast Types
MTS Broadcast/  VHS Hi-Fi Stereo System
Equipped  with ®-TV
Noise  Reduction  for
true  MTS  reproduction.
®-TV Noise
Reduction  is  required
for good stereo
separation  and  audio
fidelity. 
® is a
registered  trademark,
and is licensed by 
®
Technology  Licensing.
Connection
Make the Audio/Video Connection as shown on pp. 12 ~ 15.
•  You  can  use  TV  connected  to  a  Stereo  amplifier  and  speakers  instead  of  Stereo  TV.
To  display  the  broadcast  signal  being  received,
➛ ➛➛ ➛
➛ press DISPLAY*.
AUDIO
(SAP/Hi-Fi)
DISPLAY
STOP       1 2 : 0 0AMCH  02   0 : 0 0 : 0 0 SPSTEREOSAPMONO
STOP       1 2 : 0 0AMCH  02   0 : 0 0 : 0 0 SPSTEREOSAPMONO
STOP       1 2 : 0 0AMCH  02   0 : 0 0 : 0 0 SPSTEREOSAPMONO
STOP       1 2 : 0 0AMCH  02   0 : 0 0 : 0 0 SPSTEREOSAPMONO 
						

							27
Audio Mode for Recording
1
2
Do a recording.
See p. 21.3
• Only  tapes  recorded  in  Hi-Fi  stereo  will  playback  with  true  stereo  sound.  Standard
stereo  tapes  will  playback  in  monaural  sound.
• To  listen  to  Hi-Fi  stereo  playback, the  DECK  AUDIO  (L/R)  jacks  must  be  connected  to
a  stereo  TV  or  an  external  stereo  amplifier  and  speakers.  (See  pp.  12,  14,  15.)
• If  tracking  is  adjusted  during  playback,  Hi-Fi  audio  may  revert  to  normal  audio.
• Hi-Fi  and  normal  audio  playback  volume  level  may  differ.• Refer  to  “Receivable  Broadcast  Types”  on  p.  26.
• Arrow  indicates  selection.
Press AUDIO (SAP/Hi-Fi)
to display  audio  mode.
(Display  disappears  after  5  seconds.)
Press AUDIO (SAP/Hi-Fi) repeatedly
to  select  desired  mode.
STEREOSAPMONO
Notes*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
VCR
  OperationAudio Mode for Playback
Start playback.
See p. 20.
• Arrow  indicates
selection.• Select  “HIFI  (L/R)”  or  “HIFI  (L)”  or  “HIFI  (R)”  to  listen  to  stereo
recordings  in  stereo  sound.
Select  “NORMAL”  for  monaural  sound.
• Display  disappears  after  5  seconds.
Press AUDIO (SAP/Hi-Fi)
to  display  audio  mode.
Press AUDIO (SAP/Hi-Fi) repeatedly
to  select  desired  mode.
1
2
3
H I F I : L / RH I F I : L H I F I : RNORMAL 
						

							28For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Multi-Brand  Control  Feature
The  Remote  Control  can  be  set  to  control  some  TV  and
Cable  Box/DSS  functions.
Find your TV and Cable Box/DSS Receiver
Brand Code Number on the following page.
Setup for TV control,➛ ➛➛ ➛
➛hold  down  TV  button,
➛ ➛➛ ➛
➛enter  code  with  NUMBER  keys.
Multi-Brand  Control  Setup
Confirm code entry,
➛press  POWER  to  turn  selected  unit  on  or  off.
• See table below for controllable functions in each mode.
Setup for Cable or DSS control,➛ ➛➛ ➛
➛hold  down  DSS/CABLE  button,
➛ ➛➛ ➛
➛enter  code  with  NUMBER  keys.
• If  code  number  is  100  or  greater,
➛e.g.,  press  1  -  0  -  2  for  102.
3 1
• Repeat  setup  after  remote  battery  replacement.
• Remote  will  not  control  every  TV,  Cable  Box,  or
DSS  made  by  the  manufacturer  listed.  If  you  get
no  response,  your  particular  unit  cannot  be
controlled.  There  are  NO  additional  codes  for  the
products  listed.  If  your  product  is  not  listed,  then
the  remote  is  not  compatible  with  that  product.Notes
2
ModeUnitDVD/VCR TV
DVD/VCR
TV
All
POWER,  INPUT,
NUMBER  keys,
ENTER,
CH 
/,
VOL +/-
EJECT/OPEN/CLOSE  *,DISPLAY, PLAY, STOP,
FF/SLOW+, REW/SLOW-,
VCR/TV, PAUSE
/STILL, SKIP,AUDIO, CA/ZERO,
TAPE  POSITION,
COUNTER  RESET , SPEED,
REC After  remote  is  set  up,  you  can  select  VCR,  DVD,  TV,  or
DSS/CABLE  for  the  desired  function.
Press VCR, DVD, TV, or DSS/CABLE on the remote.(Table  below  shows  available  remote  buttons  for  each  mode.)
CABLE/ DSS
Using  Multi-Brand  Control
CABLE/
DSSPOWER,  ENTER,
NUMBER  keys
(except  100key),
CH 
/
• Not  all  functions  listed  may  be  controllable.
• In  TV  or  DSS/CABLE  mode,  it  may  be  necessary  to  press  ENTER  after  pressing
NUMBER  keys  for  channel  selection.
Notes
VOL +/-
VOL +/-
*
  Bold:  VCR  FunctionBold  Italic:  VCR  and  DVD  Functions
   Italic: DVD FunctionNormal:  TV,  Cable  Box  or  DSS  Receiver
DSS/
CABLE POWER
ENTERNUMBER
keys
TV
VCR
DVD 
						

							29
• Due  to  changes  in  infra-red  commands  used  by  manufacturers,  some  brands  have  several
codes.  If  your  unit  does  not  respond  to  the  first  code,  please  try  the  next  one.
• Some  TV,  Cable  Box  and  DSS  Receiver  brands  require  you  to  turn  on  the  power  manually.
Cable Box Brand Code Numbers
Panasonic ....................... 01,  02
Quasar ............................ 01,  02
RCA ....................................... 03
GE ......................................... 03
Zenith .................................... 04
Magnavox .............................. 05
TV Brand Code Numbers
Sylvania ................................ 05
Sharp...............................06, 07
Sony ...................................... 08
Toshiba ................................. 09
Sanyo.................................... 10
Fisher .................................... 10JVC ........................................ 11
Hitachi................................... 12
Mitsubishi ........................ 07,  13
Samsung ............................... 14
Gold Star...................15, 16, 17
DSS Brand Code Numbers
Important Notes
Archer ......................... 44, 06, 01, 120, 05, 63, 126
Cableview................29, 09, 01, 63, 120, 44, 42, 30
                                                52, 04, 124, 126
Citizen...................44, 52, 30, 63, 42, 04, 124, 126
Curtis.....................................08, 09, 25, 61, 53, 87
Century ......................................44, 51, 75, 59, 126
Cabletenna .................. 29, 09, 01, 63, 120, 44, 126
Cable Cinema.............. 29, 09, 01, 63, 120, 44, 126
Diamond...................... 29, 09, 01, 63, 120, 44, 126
Eagle.......................62, 40, 22, 13, 58, 20, 26, 107
Eastern...................................................28, 29, 130
Explorer ..................................08, 09, 25, 61, 53, 87
Gemini.....................................................30, 04, 124
General Electric......................................01, 57, 120
General Instruments . 01, 84, 83, 34, 03, 02, 04, 55
   65, 66, 67, 68, 120, 106, 121, 122, 115, 117, 118, 124
Gerrard ...............................................44, 51, 75, 59
GC Electronics ...............44, 42, 63, 29, 30, 52, 04
                                                           124, 126
Hamlin...............41, 14, 15, 28, 102, 104, 103, 130
Hitachi................................................................... 31
Jerrold..........01, 84, 83, 34, 03, 02, 04, 55, 65, 66
       67, 68, 120, 106, 121, 122, 115, 117, 118, 124
Jasco......................................................30, 04, 124
Macom................................................................... 31
Magnavox ......................................................26, 112
Matsushita.................................17, 16, 08, 87, 109
Movietime ......................32, 39, 42, 44, 126, 38, 40
Maestro ...........................................................74, 35
NEC ....................................................40, 19, 38, 32
NSC ....................................................40, 19, 38, 32
Novavision .............................08, 09, 25, 61, 53, 87
Next Level........... 01,  84,  83,  34,  03,  02,  04,  55,  65
                             66, 67, 68, 120, 106, 121, 122
Oak .................................................46, 11, 129, 101Oak Sigma.....................................46, 11, 129, 101
Panasonic ..................................17, 16, 08, 87, 109
Philips ...................23, 24, 20, 13, 07, 50, 128, 129
Pioneer ......................................................06, 05, 12
Pulsar ....................04, 42, 63, 44, 30, 52, 124, 126
Quest ........................................................06, 05, 12
Radio Shack...............................44, 51, 75, 59, 126
RCA ............................................17, 16, 08, 87, 109
Realistic .....................................44, 51, 75, 59, 126
Recoton ......................................44, 51, 75, 59, 126
Regal.................41, 14, 15, 28, 102, 104, 103, 130
Regency ..................................................28, 29, 130
Rembrandt.......44, 42, 63, 29, 01, 32, 39, 120, 126
Samsung ......................................42, 06, 32, 05, 40
Scientific  Atlanta...................08, 09, 25, 61, 53, 87
Sheritech ............................................................... 27
Signal ............................................................26, 112
SL Marx.............42, 06, 32, 40, 43, 44, 52, 63, 126
Sprucer ......................................17, 16, 08, 87, 109
Standard Components ............... 32, 39, 42, 44, 126
Stargate .............. 04, 42, 32, 40, 63, 44, 30, 52, 06
                                                          124, 126
Sylvania .......................................................... 19,  18
Teknika ...........................................................74, 35
Telecaption ....................................................77, 127
Teleview.................................40, 19, 38, 32, 42, 06
Texscan .......................................................... 19,  18
Tocom...................................34, 33, 01, 42, 66, 120
Toshiba ................................................................. 36
Unika........................... 44, 42, 63, 29, 01, 126, 120
Universal ..............................52, 43, 44, 63, 42, 126
Viewstar ..................62, 40, 22, 13, 58, 20, 26, 107
Videoway ..........................................07, 23, 50, 129
Vidtek.................................................................... 64
Zenith ...............................................07, 23, 50, 129
Toshiba....................................................... 90
Hitachi/  Hughes....................................91,  99
Primestar.................................................... 92
Drake.......................................................... 93
Magnavox.............................................94,  95
Uniden...................................................94,  95Optimus................................................94,  95
Panasonic................................................... 96
ProScan...................................................... 97
RCA ............................................................. 97
SONY..................................................98,  105
VCR
  Operation 
						

							30For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
  Marking
When C/A RECORD: ON, VCR automatically rewinds
the tape after a recording has been made and marks the
beginning  and  end  of  any  detected  commercial  blocks.
After marking is done, the tape is returned to the end of
recording.  Commercials  are  not  erased  from  the  tape.
Press 
to select “SET UP
COMMERCIAL ADV.,”
and press SET to
display.
Press 
to select “C/A RECORD,”
and press SET to set
“ON” or “OFF”.
ONTimer  Recording  and  One  Touch  recordings  are  marked  automatically.
When  STOP  is  pressed  during  normal  recording,  Select  One  of  a)
or  b)  or  c).
a) Press  1  key  to  mark  the  recording 
now.
“NOW  MARKING  COMMERCIALS”  appears.
b) Press  2  key  to  mark  the  recording 
later  (after  the  power  has
been  turned  off).
• If  the  tape  is  rewound  and  another  recording  started  before  the
power  is  turned  off,  commercials  may  not  be  marked  correctly.
c ) Press  ACTION  to 
cancel  the  marking  of  this  recording.• When  using  the  timer  to  record  two
adjacent  shows  on  the  same
channel,  better  accuracy  can  be
obtained  by  programming  each
shows  separately.
  detects  and  marks  the
beginning  and  end  points  of  commercials  on  your  tape
for  recordings  over  15  minutes  in  length.
When 
 marked tape is played
back,  the  VCR  automatically  advances  through  the
commercial  segments  at  high  speed.  You  can  also  set
this  feature  to  Manual  so  as  to  have  more  control  over
the  advance  process.  The  effectiveness  of  this  system
can  vary  due  to  differences  in  the  way  television  stations
broadcast.  See  page  32  for  answers  to  the  most
commonly  asked  questions  about  this  feature.
OFFThe  VCR  will  not  mark  commercials.
When you are editing or dubbing a tape, or when you do not wish to use this feature,
OFF  should  be  selected.
2
31
4
Press ACTION twice
to return to normal screen.
Tape  Operation
Note
Ready Checklist
All  connections  are  made.
One  time  Setup  completed.
VCR is plugged in.
TV  is  turned  on  and  set  to  CH3,  4
or Video on TV.
SELECT :              EXIT          : ACTION    SET:SET
                MENU
SET  UP  VCR
SET  CLOCK
SET  UP  CHANNEL
SET  UP  C
OMMERC I AL  ADV.  
IDIOMA/LANGUE : ENGL I SH
VCR’S  OUTPUT  CH:3
SELECT :              SET : SET 
EXIT      : ACT I ON     
  SET  UP  COMMERCIAL  ADV.
C/A  RECORD            :ON
C/A  PLAYBACK        :AUTO
THE  VCR  IS  WAITING  TO
MARK  COMMERCIALS  IN  THE
PROGRAM  YOU  RECORDED.
MARKING
NOW          : PRESS  1
LATER      
  : PRESS  2
CANCEL    : PRESS  ACTION
SETNUMBER
keys
SELECT 
ACTION
Press  ACTION*
to display MENU.