Panasonic Dvd Vcr Deck Pv D4762 Operating Instructions

31
  Playback
When  playing  back  recording  which  have  been
marked using  feature, you can
either  set  VCR  to  automatically  advance  through
marked commercial blocks, or set it so that
commercials  are  only  skipped  on  your  command.
AUTO :VCR  will  automatically  advance  through
marked  commercial  blocks  recorded  on  the
tape  and  then  resume  playback.
MANUAL :VCR  will  advance  through  commercials  only
when  CA/ZERO  is  pressed.  Playback  will
resume  when  the  end  mark  of  a...

32For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tape Operation (continued)
The  most  commonly  asked  questions  about   are  answered  below.
Question
How  fast  does  the  VCR  advance
through  commercials?
Are  commercials  advanced  through  only
when  I  playback  a  recording?
Are  commercials  still  recorded  on  the
tape  in  case  I  choose  to  view  them
sometime?
Does 
  work  in
all  recording  speeds?
Does  the  VCR  advance...

33
  helps  you  locate  certain
parts  of  prerecorded  movies  (rented  or
purchased). The feature works in two ways.
• You can go to the beginning of the movie.
•  You  can  skip  from  one  preview  to  the  next.
 works only on tapes
recorded in SP speed with the record tab
removed.
Insert a tape
without record tab.
Press SEARCH/ M/A SKIP* three times to
display MOVIE ADVANCE.
Select “GO TO START MOVIE,” if you want
to  advance  directly  to  beginning  of  the
movie.
➛ ➛➛ ➛
➛continue with step 4....

34For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Index Search
Note
• If  Index  Search  is  started  very  close  to  an
index  mark,  that  index  mark  may  not  be
counted  in  the  search.
1
2
Tape  Operation
Search  System
For  each  recording,  an  invisible  index  mark  is  placed  on  the  tape.  A  program  index  and
information are also included for timer recordings. These marks are used to access or
scan  recordings.
1
Program End...

35
 Auto Play
Insert a tape ➛ Power comes on,
➛ Play starts if no record tab
(see p. 6).
 Auto Rewind
Play
Fast Forward
 Play Auto Eject
(Repeat Play must be off)
Play 
➛  ➛ ➛  ➛ 
➛ Tape end ➛  ➛ ➛  ➛ 
➛ Rewind
➛  ➛ ➛  ➛ 
➛ Tape ejects if no record tab
Auto  Operation  Functions
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
REW/SLOW-
FF/SLOW+ PLAY
SEARCH/
M/A SKIP
NUMBER
keys
CA/ZERO
STOP
VCR
  Operation
➛ Tape end ➛ Rewind...

36For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tape Operation (continued)
Repeat Play
Set  to  playback  a  recording  over  and  over.
32 1
SELECT :              EXIT          : ACTION    SET:SET
                MENU
SET  UP  VCR
SET  CLOCK
SET  UP  CHANNEL
SET  UP  C
OMMERC I AL  ADV.  
IDIOMA/LANGUE : ENGL I SH
VCR’S  OUTPUT  CH:3
Press  ACTION*
to display MENU.
Press 
to select “SET UP VCR,” and
press SET.
• Play  repeats  at  tape  end  or  if...

37
SELECT :              EXIT          : ACTION    SET:SET
                MENU
SET  UP  VCR
SET  CLOCK
SET  UP  CHANNEL
SET  UP  C
OMMERC I AL  ADV.  
IDIOMA/LANGUE : ENGL I SH
VCR’S  OUTPUT  CH:3
ACTION
SET
Special VCR  Features
SELECT 
*Important:If a remote control button does not work
when pressed,  press the VCR button
on the remote and try the button again.
When  set  to  ON,  all  operations
except  for  timer  record  and  tape
eject  are  prohibited.  Useful  for
households  with  small...

38For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Special VCR  Features  (continued)
INPUT
ACTION
SET
TAPE
POSITION
SELECT 
If  Multi-brand  feature  is  used  (p.  28),  and  this  feature  is
set  to  on,  a  warning  appears  whenever  an  invalid  key
is  pressed  in  TV,  DSS  or  CABLE  mode.
4 31
• If  “OFF,”  remote  warning  will  not  appear
when  invalid  key  is  pressed.
Press  ACTION*
to display MENU.
Press 
to select
“REMOTE WARNING,”...

39
Copying Your Tapes (Dubbing)
1Insert a pre-recorded tape.
2
Insert a blank tape with record tab.
Press REC, then PAUSE/STILL
immediately  to  enter  REC/PAUSE
mode.
3
Press INPUT to set DECK Input mode to
LINE for Video Input.
(See  “Selecting  the  Input  Mode”  below.)
4
Press PLAY to start dubbing.
Playing  VCR  starts  playback.Press PAUSE/STILL to start dubbing.
DECK  starts  recording.
Press STOP to stop dubbing.
Caution:• Unauthorized  exchanging  and/or  copying  of  copyrighted  recordings...

40For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
AUDIO:3  ESP
Dolby  Digital  3/2.1ch
SELECT:  SET:SET
Hola
AUDIO:1  ENG
Dolby  Digital  3/2.1ch
SELECT
:  SET:
T:SET
Hello
ESPESP
Te amoTe amo
• If  after  several  presses  of  the  button  the  language  does  not
change,  language  selection  is  not  offered  on  the  disc.
• When  power  is  turned  on again  or  disc  is removed,  subtitles
revert to initial setting language. If the initial...