Panasonic Dvd Vcr Deck Pv D4762 Operating Instructions

11
REC         1 2 : 0 0AM0 : 25CH 02-0 : 1 2 : 3 4 SPSTEREOSAPMONO
VCR Status & Clock DisplaysBlank Tape/ No Video Signal
Indications
Whenever  a  blank  section  of  a  tape
comes  up  in  Play  mode,  or  when  the
selected  channel  has  no  broadcast
signal with Weak Signal Display
Feature  (p.  37)  set  to  OFF,  the  TV
screen will turn solid blue.
Function  Status
Rec  Time  Remaining
(OTR  mode  only,
see  p.  21.)
Current  Time
Channel
Tape  Speed
(See  p.  6.) Broadcast  Audio
Being...

12For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Connections
1  Disconnect  antenna  or  cable  from  TV
and  connect  to  DECK.
WARNING
When  using  “Nut  type”  RF  coaxial  cables,  tighten  with
fingers  only.  Overtightening  may  damage  terminals.
Basic Connections
• Connect DECK and TV with an RF Coaxial Cable a (supplied) or an AV Cable b
(not  supplied)  as  shown  in  the  figure  below.
•If your TV has AUDIO and VIDEO IN terminals,...

13
You CannotYou Can
• record and view
both scrambled
and unscrambled
channels if
additional
equipment is
added.
This connection
requires: two
converter  boxes,
an A/B switch,
and a 2-way
splitter.• view channel
other than the
one selected
for  any  type  of
recording.
• do a Timer
recording of a
channel unless
you  select  it  on
the Cable Box.IN FROM ANT.
OUT
 TO TV
IN 1
VHF/UHF
OUT
IN 2 IN 1
Cable  Box
OUT IN OUT 2 OUT 1
2-Way  Splitter
OUT
A/B  Switch IN
  
      
  Connect With Two Cable Boxes...

15
When  DVDs  recorded  in  Dolby  Digital  or  dts  are  played,  Dolby  Digital  bitstream  or
dts bitstream is output from the DECK OPTICAL digital audio output connector.
When DECK is connected to a Dolby Digital decoder or dts decoder, you can enjoy
theater-quality  audio  in  your  home.  [An  optical  digital  audio  cable  (optional)  is
required  when  an  optional  Dolby  Digital  decoder  or  dts  decoder  is  used.]
Notes on connecting an optical
digital audio cable (optional)
• Firmly...

16For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Before doing Initial Setup
Turn TV on.
See  connections a  RF  Coaxial  Cable  Connection  and b  AV  Cable  Connection  on  p.  12.

  Set TV to channel 3.

Set TV to VIDEO.
[DECK 
➛ ➛➛ ➛
➛ TV]
•  Go to “Doing Initial Setup (Ready to Play).” (See below.)
[Cable Box 
➛ ➛➛ ➛
➛ DECK 
➛ ➛➛ ➛
➛ TV], [DSS 
➛ ➛➛ ➛
➛ DECK 
➛ ➛➛ ➛
➛ TV]
•  Turn on Cable Box and set it to your Public Broadcasting Station (PBS)...

17
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
ACTION
SET
SELECT 
Settings are made automatically.
When setup is done, this screen appears.
If “AUTO CLOCK SET IS INCOMPLETE”
appears, manually set clock. See below.
3
9 / 29 / 20 02 SUN    2 : 20PMDST : ONSETT I NG  :   CH   10
AUTO  CLOCK  SET
    
 COMPLETED
If Auto Clock Set was incomplete.
Press ACTION* on remote to display
CLOCK  screen.
Press 
 to select the month and...

18For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
SELECT :              EXIT          : ACTION    SET:SET
                MENU
SET  UP  VCR
SET  CLOCK
SET  UP  CHANNEL
SET  UP  C
OMMERC I AL  ADV.  
IDIOMA/LANGUE : ENGL I SH
VCR’S  OUTPUT  CH:3
Clock
2)Press  to select
“MANUAL,”  and press  SET.
(For  Auto  Clock  Set,  select
“AUTO  CLOCK  SET.”)
3) Press 
 and  to
select,  then  set  the  date,
time, and DST (Daylight
Saving  Time).
4) Press  ACTION...

19
Add or Delete a Channel
To  add  channel:
Select  channel  with NUMBER  keys
and press  ADD/DLT.
To  delete  channel:
Select  channel  with CH 
/ or
NUMBER  keys  and press  ADD/DLT.
CHANNEL  08  ADDED
CHANNEL  08  DELE TED
Time Zone Adjust
2)Press   to  select
“TIME  ZONE  ADJUST,”
VCR’s  Output
Channel
1) Press  to select
“VCR’S  OUTPUT  CH.,”
and press SET.
SELECT :              EXIT          : ACTION    SET:SET
                MENU
SET  UP  VCR
SET  CLOCK
SET  UP  CHANNEL
SET  UP  C
OMMERC I AL...

20For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Playback/ Record on a Tape
PAUSE/
STILL REW/SLOW-
STOPFF/SLOW+
EJECT
Insert  a  tape.21
Playback using DECK buttons
Press  PLAY.
CH /
SPEED REC
VCR/TV
PLAY
Multi  Function  Display
Press  STOP/EJECT  to  stop
and/ or eject a tape.
DVD
Insert a tape.
• DECK  power  comes  on.
The VCR mode and “VCR” indicator light up
on  Multi  Function  Display.
• If  tape  has  no  rec.  tab  (p.  6),  auto  play...