Panasonic Dvd Vcr Deck Pv D4743 Operating Instructions

41
1Press DISPLAY in Play or Stop mode
to display “On-Screen Displays.”
When DISPLAY is pressed, On-Screen Displays show
disc information (title/chapter/track number, elapsed
playing time) and DECK information (repeat play, play
mode).
Each press of 
DISPLAY changes the on-screen
display as follows. (Refer to p. 42.)
DISPLAY button does not function while DVD
TITLE MENU is displayed.
Note
3
Press  or NUMBER keys
to select the setting, and
press 
SET.

2Press  (or  )
to select 
an item, and
press SET....

42For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
DVD Operation using On-Screen Displays (continued)
Detailed Descriptions of each On-Screen Display
  
 Disc information screen (for Video CD/ CD)A. TRACK No.
Select “TRACK”, and press SET.
Change the No. by pressing  or NUMBER keys, and press SET.
B. Playback control ON/OFF
[Video CD with playback control only]
C. Disc currently being played
D. Elapsed playing time
TITLEchapterchapter...

43
DV D
 Operation
MP3/WMA/JPEG Playback Operation
ROOT
VA
TECHNO
  
POPS
JAZZ
END_WALTZ
DD_CUB I C 
N
OCTURNE
NORNOnly File (not Folder) area
operation is possible.
Files are displayed in the
following order:
(!...0,1....9,A,B......Z).
Notes
4
5
 Select file (During STOP mode)
1)Press  to select an MP3/WMA file ( / ).
➡ MP3/WMA Playback (see right)
2)Press 
 to select a JPEG file ().
➡ JPEG Playback (see p.44)
3)Press 
SKIP | (next) or | SKIP(previous) to skip a file/folder page (7files)
in the File...

44For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
MP3/WMA/JPEG Playback Operation (continued)
Select PLAY MODE [JPEG Slide-show]
(During STOP mode) (See p.43)
1)Press 
  to move cursor to
PLAY MODE.
2)Press 
 to select the desired PLAY
MODE (see below).

REW/SLOW-
ROOT
AAA
DDD
TTT
UUU
VVV
WWW
ZZZ
01 PIC
FF/SLOW+ Operation can be done when files are in
order, such as in the diagram below.
REW/SLOW-
FF/SLOW+ [PLAY MODE]
NORMAL:
All JPEG files are...

45
DV D
 Operation
ANGLE ZOOM
SELECT 
SETPLAY
STOP
STILL REW/
SLOW-
FF/
SLOW+SKIP 
SKIP 
ACTION
 1st press  2nd press  3rd press
 4th press You can enlarge specific portions of a JPEG picture
and select the zoom ratio using the ZOOM button
on the remote during JPEG Playback screen.
Set Zoom size.Press ZOOM repeatedly to change display as
follows.
➡
Press STOP to return the MP3/WMA/JPEG MENU.
You can enlarge the center portion of the image to
one of 2 magnifications.
Operation can be done during...

46For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1
DVD Lock (DVD only)
LEVEL 0 : LOCK ALL, Playback of  all DVDs, CDs, Video
CDs, MP3, WMA and JPEG is prohibited.
(Use to prohibit play of mature theme DVDs not
encoded with rating level.)
LEVEL 1 : mature  theme DVDs
LEVEL 2 : DVDs expressly for children can be played back.
LEVEL 3 to 7 : DVDs for general audiences/children can be
played back. (DVDs with mature content
are prohibited.)
LEVEL 8 : NO...

47
Disc Languages (DVD only)
To select and set the language of the audio
soundtrack, subtitles, or title/DVD menus for all discs
to be played.
“AUDIO” selections(Factory preset: English)To select the audio soundtrack language.English/Spanish/French/Japanese
Original: Original disc language
OTHER ✱✱✱✱: Other language selection*
1
“SUBTITLE” selections(Factory preset: AUTO)To select the subtitle language.AUTO:Same language selected
for “AUDIO”
If language set for “AUDIO” is used in
playback, subtitles...

48For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Make settings according to amplifier
connected to optical audio output as shown
in above table.
*1 When connecting an amplifier (with an
optical digital input connector) which does
not contain the Dolby Digital or DTS
decoder, be sure to select “PCM”.
If “Bitstream” is selected, starting DVD play
may cause such a high level of noise as to
be harmful to your ears and damage the
speakers.
*2 When a DTS...

49
Still Mode
1
Press to select “STILL MODE,”
and
press 
SET repeatedly
for mode. (See below.)
2
AUTO :“FIELD” (Field still) or “FRAME” (Frame still) is
automatically selected during the still mode.
(Factory preset)
FIELD:“FIELD” (Field still) is always selected.
This setting will reduce jitter when compared
with “AUTO” on some discs.
FRAME:“FRAME” (Frame still) is always selected.
Some texts and fine patterns will be seen clearly
when compared with “AU TO” on some discs.
TV Mode
1
Press to select “TV...

50For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Language Code List
Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or
“MENUS” (see p. 47).
   CodeLanguage
7079Faroese
7082French
7089Frisian
7165Irish
7168Scots Gaelic
7176Galician
7178Guarani
7185Gujarati
7265Hausa
7273Hindi
7282Croatian
7285Hungarian
7289Armenian
7365Interlingua
7378Indonesian
7383Icelandic
7384Italian
7387Hebrew
7465Japanese
7473Yiddish...