Panasonic Dvd Vcr Deck Pv D4743 Operating Instructions

21
Insert a tape with a record tab (p. 6).
1
54 2
3
Press CH , or NUMBER keys
to select the channel.
For “LINE” input, see p. 35.
If channel is over 100, press 100 key then press
the remaining 2 digits.
Press SPEED
to select the record speed (p. 6).
SP = Standard Play            LP = Long Play
SLP = Super Long Play
Press REC
to start recording.
(The VCR REC indicator lights up on Multi Function
Display),
To edit out unwanted scenes, press PAUSE/STILL
to pause, and again to resume recording.
You...

22For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Basic DVD Operation
Ready Checklist
All connections are made. (pp. 12 ~ 15)
DECK is plugged in.
If DECK is connected to an audio amplifier,
turn the stereo system’s power on.
*1Interactive DVD...
May include multiple camera angles,
stories, etc.
*
2Video CD with playback control...
Particular scenes or information can be
interactively selected from a menu that
appears on the screen.
Operation using...

23
Forward/Reverse Scene Search
Press FF/SLOW+ or REW/SLOW-during play.
Press 
PLAY to release.Starting forward/reverse search during play
started from menu on Video CDs may recall menu.
Search speed, slow at first, increases with each
additional press of the button up to 5 levels.
Forward/Reverse Chapter/Track Skip
Press SKIP | or | SKIP during play.
Each press skips a chapter (DVD) or
track (Video CD/CD).
Pressing | SKIP once midway through a
chapter/track returns to the start of that...

24For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
VCR
TIMER
RECHi - FiA
M
Timer Recording
Press PROG*
to display Program.
Press PROG
to end programming.
3 1
DAILY
131
31
12
SELECT     /      
Selection Order
WEEKLY
(SAT)WEEKLY
(MON) WEEKLY
(SUN)
14
Example
Today
2) To set remaining items,
press 
to select and
press SET
to set START/ STOP times,
CH (channel) or LINE
input (p. 35), and tape
speed (SP, LP, SLP).
To Enter More Programs,
press 
to select...

25
To Replace program...
To Clear program...
Review, Replace or Clear Program Contents:
(Recording is not in progress)
or
Important notes when using DSS Receiver
When recording programs via DSS Receiver, DSS Receiver must be left on.
When recording programs via an antenna or cable, DSS Receiver must be turned off.
CANCEL   : ADD / DLT SELECT   1-8 :               
ENTER     : SET
EXIT         : PROG
DT   START     STOP    CH   SPD--  -- : --    -- : --   --   --  8   10 : 00P  12 : 00P    02     SP10...

26For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
MTS Broadcast/  VHS Hi-Fi Stereo System
Equipped with ®-TV
Noise Reduction for
true MTS reproduction.
®-TV Noise
Reduction is required
for good stereo
separation and audio
fidelity. 
® is a
registered trademark,
and is licensed by 
®
Technology Licensing.
Connection
Make the Audio/Video Connection as shown on pp. 12 ~ 15.
 You can use TV connected to a Stereo amplifier and speakers instead of Stereo...

27
Audio Mode for Recording
1
2
Make a recording.
See p. 21.3
Audio Mode for Playback
Start playback.
See p. 20.
Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard
stereo tapes will playback in monaural sound.
To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to
a stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14.)
If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
Hi-Fi and normal audio...

28For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Multi-Brand Control Feature
ModeUnitDVD/VCR
TV
DVD/VCR
TV
All
POWER, INPUT,
NUMBER keys, ENTER,
CH 
/, VOL +/-
EJECT/OPEN/CLOSE  *,
DISPLAY, PLAY, STOP,
FF/SLOW+, REW/SLOW-,
VCR/TV, PAUSE/STILL, SKIP,
AUDIO, CM/ZERO,
TAPE POSITION,
COUNTER RESET, SPEED,
REC After remote is set up, you can select VCR, DVD, or TV for the
desired function.
Press VCR, DVD, or TV on the remote.(Table below shows available...

29
Some manufacturers use several codes for one brand. If the first code entered fails, try the
next one listed.
Some TV brands require you to turn on the power manually.
Panasonic .......................01, 02
Quasar ............................01, 02
RCA ....................................... 03
GE ......................................... 03
Zenith .................................... 04
Magnavox .............................. 05
TV Brand Code Numbers
Sylvania ................................ 05...

30For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Index Search
Note
If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
1
2
Tape Operation
Search System
For each recording, an invisible index mark is placed on the tape. A program index and
information are also included for timer recordings. These marks are used to access or
scan recordings.
1
Program End Search
2
Fig. 1
Fig. 2
Fig. 3
Note
Locates...