Panasonic Dvd Home Theater Sound System Sc Pt760 Operating Instructions

							21
Using on-screen menus
RQTX0105
∫Menu 2 (Video)
∫Menu 3 (Audio)∫Menu 4 (HDMI)
Confirming HDMI informatione.g.
1 Connection status
2 Shows the output signal type.
3 Shows the number of audio channels.
4 (➜ above, VIDEO FORMAT)
5 (➜ above, COLOR SPACE)
[Note]
When “OFF” is selected in “AUDIO OUT” (➜ 24, “HDMI” menu), 
“– – –” will be displayed in “AUDIO STREAM”.
DAT E  DI SP LAY
[JPEG] To select “ON” or “OFF” for picture’s 
date display
ROTATION
To rotate a picture (during pause)
[JPEG] :  0,------. 90,------.180,------.270 
^--------------------------------------------J
PICTURE MODE
NORMAL
CINEMA1:  Mellows images and enhances 
detail in dark scenes.
CINEMA2:Sharpens images and enhances 
detail in dark scenes.
DYNAMIC:Enhances the contrast for powerful 
images.
ANIMATION:Suitable for animation.
ZOOM
To select zoom sizesNORMAL, AUTO ([DVD-VR] [DVD-V] [VCD]), k2, k4
≥[JPEG]: during pause
TRANSFER 
MODE
If you have chosen “480p”/“720p”/“1080p” 
(progressive), “1080i” (interlaced) 
[“VIDEO FORMAT” in Menu 4 (HDMI)] or 
“PROGRESSIVE” under “VIDEO OUT (I/P)” 
(➜ 23, “VIDEO” menu), select the method of 
conversion for progressive output to suit the type 
of material.
≥The setting will return to “AUTO1” when the 
disc tray is opened, the unit is turned off or 
another source is selected.
AUTO1:Automatically detects the film and video 
content, and appropriately converts it.
AUTO2:
In addition to “AUTO1”, automatically 
detects film contents with different frame 
rates and appropriately converts it
.
VIDEO:Select when using “AUTO1” or 
“AUTO2”, and the content is distorted.
DIALOGUE 
ENHANCER
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or higher, 
with the dialogue recorded in the center channel)
OFF, ON
Dolby PL II
OFF, MOVIE, MUSIC 
(➜ 28, Using Dolby Pro LogicII)
JPGDATE
PLII
HDMI STATUS
To show HDMI information.
(➜ below, Confirming HDMI information)
HD ENHANCER
This works when the HDMI connection is being 
used with “VIDEO PRIORITY” (➜ 24, “HDMI” 
menu) set to “ON”.
To sharpen the “720p”, “1080i” and “1080p” 
picture quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection is being 
used with “VIDEO PRIORITY” (➜ 24, “HDMI” 
menu) set to “ON”.
To select suitable picture quality with your TV
(Video recordings will be converted to, and output 
as, high-definition video.)
§480p/720p/1080p (progressive)§480i/1080i (interlaced)
≥If the picture is distorted, press and hold 
[CANCEL] until the picture is displayed 
correctly. (The output will return to “480p”.)
§The numbers displayed depend on the disc 
being played. One of the above numbers is 
displayed.
COLOR SPACE
This works when the HDMI connection is being 
used with “VIDEO PRIORITY” (➜ 24, “HDMI” 
menu) set to “ON”.
To select suitable picture color with your TV
YC
bCr (4:2:2)§
– Luminance and color details is sent 
separately. Most of the picture details are in 
luminance. The color rate is much higher than 
composite video. Compatible for all TV 
models.
YC
bCr (4:4:4)§
– All color details is sent. Luminance and color 
details are in same signal.
RGB
– Component video type of signal.
≥If the setting above is not compatible with your 
TV, it will not be displayed.
§Terms are descriptions of the sample formats 
used in digital video. Y CbCr is a video signal for 
luminance (Y), blue (Cb) and red (Cr) details.
HDMI
HDMI   ---       I N F O R M AT I O N
CONNECTED STAT E
AUDIO STREAM
MAX CHANNEL
VIDEO FORMAT
COLOR SPA C ECONNECTED
PCM
2ch
720p
YCbCr   4:4:4
12345
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 21  Thursday, February 28, 2008  3:38 PM 
						

							22
Changing the player settings
RQTX0105
Changing the player settings
≥The settings remain intact even if you switch the unit to standby.
≥Underlined items are the factory settings in the following table.
∫“DISC” menu
§1The original language designated on the disc is selected.§2Input the appropriate code from the language code list (➜ 25).§3If the language selected for “AUDIO” is not available, subtitles appear in that language (if available on the disc).
SOUND
-SLEEP-CH SELECTW.S.FL DISPLAYPLAYLISTMENURETURN
ONE TOUCH PLAYSETUP
VOL
VOL
1
PA USE
23
56
89
0
10
4
7
DISC
DV D-2ND SELECTFM/AMiPod
TVTV / VIDEO
PL
SELECT
SUBWOOFERLEVEL MUTING
START
SKIP
SLOW / SEARCH
FUNCTIONSTOP MENU
-CD MODE
SETUP
RETURN
OK
-PLAY MODE-REPEATCANCEL
STOPPLAY
OK&+4%60#8+)#614
1Show the setup menu.
2Select the menu.
≥To return to the previous screen, 
press [RETURN].
3Select the item.
4Make the settings.
5Exit.
SETUP
SET
MAINDISC
VIDEO
AUD I O
DISPLAY
HDMI
OTHERS
EXIT : SETUP
RETURN
Menu
SET
RETURN
DISC
EXIT : SETUP SETTING STAT E
AUD I O
SUBTITLE
MENUS
RATINGS
PASSWORDENGLISH
AUTO
ENGLISH
8 NO LIMIT
Display the current 
setting of the items below
ItemSetting
SETUP
QUICK SETUP enables successive settings of the items in the shaded area.
AU D IOChoose the audio language.≥ENGLISH≥FRENCH≥SPANISH≥ORIGINAL§1≥OTHER – – – –§2
SUBTITLEChoose the subtitle language.≥AUTO
§3≥ENGLISH≥FRENCH≥SPANISH≥OTHER – – – –§2
MENUSChoose the language for disc menus.
Changing the menu language in 
QUICK SETUP also changes this 
setting.≥ENGLISH≥FRENCH≥SPANISH≥OTHER – – – –§2
RATINGSSet a rating level to limit DVD-Video 
play.Setting ratings (When level 8 is selected)
≥0 LOCK ALL: To prevent play of discs without rating levels.
≥1 to 7
≥8 NO LIMIT
When you select your ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video disc exceeding the rating level is inserted in the unit.
Follow the on-screen instructions.
PA S S W O R DChange the password for “RATINGS”.≥SETTINGTo change ratings (When level 0 to 7 is selected)
≥CHANGE: Follow the on-screen instructions.
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 22  Thursday, February 28, 2008  3:38 PM 
						

							23
Changing the player settings
RQTX0105
∫“VIDEO” menu
∫“AUDIO” menu
§4Refer to “Frame still and field still” (➜ 37, Glossary).§5 When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend 
on the performance of this connected equipment.
(Continued on next page)
QUICK SETUP enables successive settings of the items in the shaded area.
TV ASPECTChoose the setting to suit your TV and 
preference.≥4:3PAN&SCAN: Regular aspect TV (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless 
prohibited by the disc).
≥4:3LETTERBOX: Regular aspect TV (4:3)
Widescreen picture is shown in the letterbox style.
≥4:3ZOOM: Regular aspect TV (4:3)
The picture zooms in and out.
≥16:9NORMAL: Widescreen TV (16:9)
Laterally stretches image.
≥16:9SHRINK: Widescreen TV (16:9)
Images appear at the center of the screen.
≥16:9ZOOM: Widescreen TV (16:9)
Expands to 4:3 aspect ratio.
TV TYPESelect to suit the type of TV.≥STANDARD≥CRT≥LCD
≥PROJECTION≥PLASMA
TIME DELAYWhen connected with a Plasma display, 
adjust if you notice the audio is out of 
sync with the video.≥0 ms/AUTO
≥20 ms≥40 ms≥60 ms≥80 ms≥100 ms
When using VIERA Link “HDAVI Control” with “HDAVI Control 3” compatible TV (➜ 26), select “0 ms/AUTO”. 
Audio and video will automatically be set in sync.
STILL MODESpecify the type of picture shown when 
paused.≥AUTO≥FIELD§4: The picture is not blurred, but picture quality is lower. 
≥FRAME§4: Overall quality is high, but the picture may appear blurred. 
BLACK LEVELChange the black level of the picture.≥LIGHTER≥DARKER
VIDEO OUT (I/P)Select “PROGRESSIVE” only if 
connecting to a progressive output 
compatible TV.≥INTERLACE≥PROGRESSIVE: A message screen will appear. Follow the on-screen instructions.
DOLBY DIGITAL§5≥BITSTREAM≥PCMSelect to suit the type of equipment you connected to the HDMI AV OUT 
terminal.
Select “BITSTREAM” when the equipment can decode the bitstream (digital 
form of 5.1 channel data). Otherwise, select “PCM”.
(If the bitstream is output to the equipment without a decoder, high levels of 
noise can be output and may damage your speakers and hearing.)
DTS§5≥BITSTREAM≥PCM
DYNAMIC RANGE≥ON: Adjusts for clarity even when the volume is low. Convenient for late night viewing. (Only works with 
Dolby Digital)
≥OFF
SPEAKER SETTINGSMake settings for your speakers.≥SETTINGS:
≥C DELAY: 0ms, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker (➜ 25, Selecting the delay time of the speakers).
≥SL/SR DELAY: 0ms
, 5ms, 10ms, 15ms
Select the delay time for your surround speakers (➜ 25, Selecting the delay time of the speakers).
≥TEST TONE: SETTING
Use the test tone for speaker level adjustments (➜ 29, Adjusting the speaker level).
≥CENTER, SURROUND RIGHT, SURROUND LEFT: `6dB to i6 dB (Factory preset: 0 dB
)
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 23  Thursday, February 28, 2008  3:38 PM 
						

							24
Changing the player settings
RQTX0105
Changing the player settings
∫“DISPLAY” menu
∫“HDMI” menu
∫“OTHE RS” menu
QUICK SETUP enables successive settings of the items in the shaded area.
LANGUAGEChoose the language for the 
on-screen messages.≥ENGLISH≥FRANÇAIS≥ESPAÑOL
VIDEO PRIORITY≥ON: When using the HDMI AV OUT terminal for video output. The resolution of the video output from the 
HDMI AV OUT terminal is optimized according to the capability of the connected equipment (e.g. TV).
≥OFF: When not using the HDMI AV OUT terminal for video output. Video output will not depend on the 
connected equipment, but on this unit.
AUDIO OUT≥ON: When audio output is from the HDMI AV OUT terminal. (Depending on the capabilities of the 
connected equipment, audio output may differ from the audio settings of the main unit.)
≥OFF
: When audio output is not from the HDMI AV OUT terminal. (The audio is output using the settings of 
the main unit.)
RGB RANGEThis works only when “COLOR SPACE” 
in Menu 4 (HDMI) is set to RGB (➜ 21).≥STANDARD≥ENHANCED: When the black and white images are not distinct.
VIERA Link≥ON: The VIERA Link “HDAVI Control” function is available (➜ 26).
≥OFF
JPEG TIME Set the speed of the slideshow.
Factory preset: 3 SEC≥1 SEC to 15 SEC (in 1-unit steps)
≥15 SEC to 60 SEC (in 5-unit steps)
≥60 SEC to 180 SEC (in 30-unit steps)
FL DIMMERChange the brightness of the unit’s 
display.≥BRIGHT
≥DIM
≥AUTO: The display is dimmed, but brightens when you perform some operations.
QUICK SETUP≥SET
Follow the on-screen instructions.
DVD -VR/ DATA Select to play only DVD-VR or DATA 
for mat.≥DV D - V R: To play the video programs on DVD-RAM or DVD-R/-RW.
≥DATA: To play the data files on DVD-RAM or DVD-R/-RW.
DEFAULTS This returns all values in the MAIN 
menu to the default settings.≥RESET
The password screen is shown if “RATINGS” (➜ 22) is set. Please enter the same password, then turn 
the unit off and on again.
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 24  Thursday, February 28, 2008  3:38 PM 
						

							25
Changing the player settings
RQTX0105
(Effective when playing 5.1-channel sound)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, except for 
the subwoofer, should be the same distance from the seating position.
If you have to place the center or surround speakers closer to the seating 
position, adjust the delay time to make up for the difference.
If either distance a or b is less than c, find the difference in the table 
and change to the recommended setting.To make the delay time settings
Select “C DELAY” (Center Delay) or “SL/SR DELAY” (Surround Left/
Surround Right Delay) from “SPEAKER SETTINGS” in “AUDIO” menu 
(➜ 23).
Selecting the delay time of the speakers
L
LS
R
SW
C
RS
C
RSLS

 


Approximate room dimensions
Circle of constant primary listening distance: Actual speaker position
: Ideal speaker position
: Primary listening distance
a Center speakerb Surround speaker
Difference (Approx.)SettingDifference (Approx.)Setting
30 cm (1 foot) 1ms 150 cm (5 feet) 5ms
60 cm (2 feet) 2ms 300 cm (10 feet) 10ms
90 cm (3 feet) 3ms 450 cm (15 feet) 15ms
120 cm (4 feet) 4ms
150 cm (5 feet) 5ms
Language code list
Abkhazian: 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Ameharic: 6577
Arabic: 6582
Armenian: 7289
Assamese: 6583
Aymara: 6589
Azerbaijani: 6590
Bashkir: 6665
Basque: 6985
Bengali, Bangla: 6678
Bhutani: 6890
Bihari: 6672
Breton: 6682
Bulgarian: 6671
Burmese: 7789
Byelorussian: 6669
Cambodian: 7577
Catalan: 6765
Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech: 6783Danish: 6865
Dutch: 7876
English: 6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji: 7074
Finnish: 7073
French: 7082
Frisian: 7089
Galician: 7176
Georgian: 7565
German: 6869
Greek: 6976
Greenlandic: 7576
Guarani: 7178
Gujarati: 7185
Hausa: 7265
Hebrew: 7387
Hindi: 7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish: 7165Italian: 7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583
Kazakh: 7575
Kirghiz: 7589
Korean: 7579
Kurdish: 7585
Laotian: 7679
Latin: 7665
Latvian, Lettish: 7686
Lingala: 7678
Lithuanian: 7684
Macedonian: 7775
Malagasy: 7771
Malay: 7783
Malayalam: 7776
Maltese: 7784
Maori: 7773
Marathi: 7782
Moldavian: 7779
Mongolian: 7778
Nauru: 7865
Nepali: 7869Norwegian: 7879
Oriya: 7982
Pashto, Pushto: 8083
Persian: 7065
Polish: 8076
Por tuguese: 8084
Punjabi: 8065
Quechua: 8185
Rhaeto-Romance:8277
Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona: 8378
Sindhi: 8368
Singhalese: 8373
Slovak: 8375
Slovenian: 8376
Somali: 8379
Spanish: 6983
Sundanese: 8385
Swahili: 8387Swedish: 8386
Tagalog: 8476
Tajik: 8471
Tamil: 8465
Tatar: 8484
Telugu: 8469
Thai: 8472
Tibetan: 6679
Tigrinya: 8473
Tonga: 8479
Turkish: 8482
Turkmen: 8475
Twi: 8487
Ukrainian: 8575
Urdu: 8582
Uzbek: 8590
Vietnamese: 8673
Volapük: 8679
Welsh: 6789
Wolof: 8779
Xhosa: 8872
Yiddish: 7473
Yoruba: 8979
Zulu: 9085
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 25  Thursday, February 28, 2008  3:38 PM 
						

							26
RQTX0105
Using the VIERA Link
TM “HDAVI Control
TM”
Using the VIERA LinkTM “HDAVI ControlTM”
VIERA Link “HDAVI Control”
VIERA LinkTM is a new name for EZ SyncTM. 
VIERA Link “HDAVI Control” is a convenient function that offers linked 
operations of this unit, and a Panasonic TV (VIERA) under “HDAVI 
Control”. You can use this function by connecting the equipment with the 
HDMI cable. See the operating instructions for connected equipment for 
operational details.
≥VIERA Link “HDAVI Control”, based on the control functions provided by 
HDMI which is an industry standard known as HDMI CEC (Consumer 
Electronics Control), is a unique function that we have developed and 
added. As such, its operation with other manufacturers’ equipment that 
supports HDMI CEC cannot be guaranteed.
≥This unit suppor ts “HDAVI Control 3” function.
“HDAVI Control 3” is the newest standard (current as of December, 
2007) for Panasonic’s HDAVI Control compatible equipment. This 
standard is compatible with Panasonic’s conventional HDAVI 
equipment.
≥Please refer to individual manuals for other manufacturers’ equipment 
supporting VIERA Link function.
The TV with “HDAVI Control 2 (or later)” function enables the following 
operation: VIERA Link Control only with TV’s remote control [for 
“HDAVI Control 2 (or later)”] (➜ 27).
Preparation
≥Confirm that the HDMI connection has been made (➜ 8).
≥Set “VIERA Link” to “ON” (➜ 24, “HDMI” menu).
≥To complete and activate the connection correctly, turn on all VIERA 
Link “HDAVI Control” compatible equipment and set the TV to the 
corresponding HDMI input mode for this unit.
Setting the TV audio for VIERA Link “HDAVI Control”
Select between “
AUX” and “D-IN” to work with the linked operations.
Confirm the audio connection to the AUX terminal (for “AUX”) (➜ 8) or 
OPTICAL IN terminal (for “D-IN”) (➜ 9).
1 Press [N,OSELECT] to select 
“AUX” or “D-IN”.
2 Press [SETUP] to select “TV AUDIO”, then press [3,4] to switch 
“
AUX” or “D-IN”.
Whenever the connection or settings are changed, reconfirm the points 
above.
∫Auto setup
The settings for “TV ASPECT”§1 (➜ 23, “VIDEO” menu) and 
“LANGUAGE”§2 (➜ 24, “DISPLAY” menu) will automatically follow to 
the settings of the TV.
(This may not work if the corresponding setting you have made for 
your TV is not available on this unit.)
§1 When using VIERA Link “HDAVI Control” with “HDAVI Control 3” 
compatible TV
§2 When using VIERA Link “HDAVI Control” with “HDAVI Control 2 
(or later)” compatible TV
∫Auto lip sync
(Available when using VIERA Link “HDAVI Control” with 
“HDAVI Control 3” compatible TV)
This function automatically provides synchronised audio and video 
output. (This works only when the source is “DVD/CD”, “
AUX” or 
“D-IN”.)
≥When using “DVD/CD” as the source, set “TIME DELAY” in 
“VIDEO” menu to “0 ms/AUTO” (➜ 23).
You can turn on this unit and the TV, and start playing the disc with a 
single press of a button.
This function also works if you press [1PLAY] on this unit’s remote 
control when this unit is in standby mode.
[Note]
Playback may not be immediately displayed on the TV. If you miss the 
beginning portion of playback, press [:] or [6] to go back to where 
playback started.
≥When you switch the TV input to TV tuner mode, this unit will 
automatically switch to 
“AUX”§ or “D-IN”§. (This does not work when this 
unit is in “IPOD” mode.)
≥When you start disc play, the TV will automatically switch its input mode 
for this unit.
When the TV is turned off, this unit goes into standby mode automatically.
≥This function works only when “DVD/CD”, 
“AUX”§ or “D-IN”§ is selected 
as the source on this unit.
≥When the TV is turned on, this unit does not turn on automatically. 
(Power on link is not available.)
[Note]
When you press [Í], only this unit turns off. Other connected equipment 
compatible with VIERA Link “HDAVI Control” stays on.
§“AUX” or “D-IN” (“DIGITAL IN”) works depending on the “TV AUDIO” 
setting (➜above, Setting the TV audio for VIERA Link “HDAVI 
Control”).
PLAY SKIPSLOW/SEARCH
SOUND
-SLEEP-CH SELECTW.S.FL DISPLAYPLAYLISTMENURETURN
ONE TOUCH PLAYSETUP
VOL
VOL
1
PA USE
23
56
89
0
10
4
7
DISC
DV D-2ND SELECTFM/AMiPod
TVTV / VIDEO
PL
SELECT
SUBWOOFERLEVEL MUTING
START
SKIP
SLOW / SEARCH
FUNCTIONS
-CD MODE
-PLAY MODE-REPEATCANCEL
STOPPLAY
OKTOP MENU
SETUP ONE TOUCH  PLAY
&+4%60#8+)#614
SELECT,
One touch play
To start disc playback.≥This unit’s speakers will be automatically 
activated (➜ 27).
Auto input switching
Power off link
ONE TOUCH  PLAY
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 26  Thursday, February 28, 2008  3:38 PM 
						

							27
RQTX0105
Using the VIERA Link
TM “HDAVI Control
TM”
You can select whether audio is output from this unit’s speakers or the TV 
speakers by using the TV menu settings. For details, refer to the operating 
instructions of your TV.
Home theater
This unit’s speakers are active.
≥When this unit is in standby mode, changing the TV speakers to this 
unit’s speakers in the TV menu will automatically turn this unit on and 
select 
“AUX”§ or “D-IN”§ as the source.
≥The TV speakers are automatically muted.
≥You can control the volume setting using the volume or mute button on 
the TV’s remote control. (The volume level is displayed on the main 
unit’s FL display.)
≥To cancel muting, you can also use this unit’s remote control (➜ 14).
≥If you turn off this unit, TV speakers will be automatically activated.
TV
TV speakers are active.
≥The volume of this unit is set to “0”.
–
This function works only when “DVD/CD”, “AUX”§ or “D-IN”§ is selected 
as the source on this unit.
≥Audio output is 2-channel audio.
When switching between this unit speakers and TV speakers, the TV 
screen may be blank for several seconds.You can control the playback menus of this unit with the TV’s remote 
control. When operating the TV’s remote control, refer to the below 
illustration for operation buttons.
1 Select this unit’s operation menu by using the TV menu settings.
(For details, refer to the operating instructions of your TV.)
The START menu will be shown.
e.g. [DVD-V]
≥The START menu can also be shown by using a button on the TV’s 
remote control (e.g. [SUB MENU]).
– When 
“DVD/CD” is selected as the source, this works only during 
stop mode.
– This does not work while iPod music playback screen is displayed 
on the TV.
2 Select the desired item on the START menu (➜ 15).
When the on-screen control panel appears
e.g. [DVD-V] (when “Playback Disc” is selected from the START menu.)
You can operate the playback with the indicated controls.
≥The on-screen control panel can also be shown by using a button on the 
TV’s remote control (e.g. [SUB MENU]). 
– This works only during 
“DVD/CD” playback and resume modes or, 
while iPod music playback screen is displayed on the TV.
[Note]
≥Depending on the menu, some button operations cannot be performed 
from the TV’s remote control.
≥You cannot input numbers with the numbered buttons on the TV’s 
remote control ([0] to [9]). Use this unit’s remote control to select the 
play list etc.
Speaker controlVIERA Link Control only with TV’s remote 
control [for “HDAVI Control 2 (or later)”]
DVD/CD Home theater
OK
RETURN
Input select Playback Disc
TOP  MENU (DVD)
MENU (DVD)
Playback/menu 
access
SEARCHRETURN SEARCH
PLAYPAUSE
STOP
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 27  Thursday, February 28, 2008  3:38 PM 
						

							28
RQTX0105
Using sound effects
Using sound effects
[Note]
≥The following sound effects may not be available or have no effect with 
some sources, or when headphones are used (➜ 15).
≥You may experience a reduction in sound quality when these sound 
effects are used with some sources. If this occurs, turn the sound effects 
off.
Preparation
To display the picture, turn on the TV and select the appropriate video 
input mode.
∫Equalizer
You can select sound quality settings.
Each time you press [3,4]:
HEAVY:Adds punch to rock.
CLEAR:Clarifies higher sounds.
SOFT:For background music.
FLAT:Cancel (no effect is added).
∫H.Bass [PT960]
You can enhance low-frequency sound so that heavy bass sound 
can be heard clearly, even if the acoustics of your room are not 
optimal.
H.BASS ON,------.H.BASS OFF
≥The setting you make is retained, and recalled every time you play 
from the same type of source.
∫Real Center Focus
(Effective when playing audio containing center channel sound 
or when Dolby Pro Logic II is on.)
You can make the sound of the center speaker seem like it is coming 
from within the TV.
R.C.FCS ON,------.R.C.FCS OFF
∫Surround Enhancer
Automatically adjusts each speaker to enhance the surround sound 
effect of 5.1-channel audio. When playing two-channel audio, the 
audio of the L/R front speakers is also output through the rest of the 
speakers creating a surround sound effect.
SRD ENH ON,------.SRD ENH OFF
∫Surround Music
The sound fills the room, and comes from all directions with equal 
intensity.
S.MUSIC ON,------.S.MUSIC OFF
Dolby Pro LogicII is an advanced decoder that derives 5-channel 
surround from stereo sound sources, whether or not it has been 
specifically Dolby Surround encoded.
≥“ÎPLII” lights when there is effect.
≥This does not work when audio is output from HDMI AV OUT terminal.
≥You can adjust the volume of the surround speakers to get the best 
surround effect (➜ 29, Adjusting the speaker level).
You can enhance the surround effect for low volume 5.1-channel sound. 
(Convenient for late night viewing.)
Setting the sound effects
1Select a sound mode.
Each time you press the button:
EQ:Equalizer
H.BASS [PT960]: Harmonic Bass
R.C. FCS:Real Center Focus
SRD ENH:Surround Enhancer
S.MUSIC:Surround Music
2While the selected 
mode is displayedMake settings.Refer to the followings for setting details of 
each sound effect.
SUBWOOFER LEVEL—CH SELECT
SETUP
SOUND
-SLEEP-CH SELECTW.S.FL DISPLAYPLAYLISTMENURETURN
ONE TOUCH PLAYSETUP
VOL
VOL
1
PA USE
23
56
89
0
10
4
7
DISC
DV D-2ND SELECTFM/AMiPod
TVTV / VIDEO
PL
SELECT
SUBWOOFERLEVELMUTING
START
SKIP
SLOW / SEARCH
FUNCTIONS
-CD MODE
-PLAY MODE-REPEATCANCEL
STOPPLAY
OKTOP MENU
OK
SOUND
W.S.
&+4%60#8+)#614
PLII
+,    VOL
SW BOOST
SOUND
Using Dolby Pro LogicII
Each time you press the button:
MOVIE: Movie software
MUSIC: Stereo sources
OFF:  Cancel
Using Whisper-mode Surround
≥“(( ))” lights when there is effect.
Each time you press the button:
WHISPER-MODE SRD ON
↕
WHISPER-MODE SRD OFF
PL
PL
W.S.
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 28  Thursday, February 28, 2008  3:38 PM 
						

							Using sound effects / Enjoying the FM/AM radio
29
RQTX0105
You can adjust the amount of bass. The unit automatically selects the 
most suitable setting according to the type of playback source.
≥To check the current setting, press [SUBWOOFER LEVEL].
≥The setting you make is retained, and recalled every time you play the 
same type of source.
Main unit only
You can enhance the subwoofer effect with strong bass.
You can adjust the surround sound levels.
Preparation
≥Press [i,`VOL] to adjust the volume to normal listening level.
≥Select “TEST TONE” from “SPEAKER SETTINGS” in “AUDIO” menu 
(➜ 23).
∫To adjust speaker level during play
(Effective when playing 5.1-channel sound or when Dolby Pro 
LogicII is on.)
1Press and hold [—CH SELECT] to select the speaker.
While the speaker channel is displayed, press [—CH SELECT].
L #C #R #RS #LS #SW
^---------------------------------------------}
≥You can adjust SW (Subwoofer) only if the disc includes a 
subwoofer channel and “ÎPLII” is not lit.
2Press [3] (increase) or [4] (decrease) to adjust the speaker 
level for each speaker. 
C, RS, LS, SW: `6dB to i6dB 
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers, while “L” or “R” is selected, 
press [2,1].
∫Presetting stations manually
Up to 30 stations can be set in each band, FM and AM.
1While listening to the radio broadcast
Press [OK].
2While the frequency is flashing on the display
Press the numbered buttons to select a channel.
≥To select a 2-digit number
e.g. 12: [S10] ➜ [1] ➜ [2]
Alternatively, press [X,W], 
and then press [OK].
Main unit:
1While listening to the radio broadcast
Press [MEMORY] twice.
2While a channel no. is flashing on the display
Press [XTUNEW], and then press [MEMORY].
A station previously stored is overwritten when another station is 
stored in the same channel preset.
FM frequency step
Main unit only
The step is factory-set to 0.2-MHz, but you can change it to receive 
broadcasts allocated in 0.1-MHz steps.
1Press [SELECTOR] to select “FM”.
2Press and hold [SELECTOR].
After a few seconds the display changes to show the current minimum 
frequency. Continue to hold the button down. The minimum frequency 
changes and the step is changed.
To return to the original step, repeat steps 1 and 2.
[Note]
After changing the setting, previously preset frequencies will be cleared. 
Preset them again.
Adjusting the subwoofer level
SUB W 1#SUB W 2#SUB W 3
^---------------------------------------------------}
Using Subwoofer Boost
BST ON,------.BST OFF
The SW BOOST indicator lights when 
Subwoofer Boost is turned on.
Adjusting the speaker level
1Enter test tone mode.
Test tone will be output to each channel in the 
following order.
LEFT, CENTER, RIGHT,
SURROUND RIGHT, SURROUND LEFT
2Adjust the speaker level for each 
speaker. (CENTER, SURROUND 
RIGHT, SURROUND LEFT)
`6dB to i6dB
≥To exit the screen, press [SETUP].
SUBWOOFER
-CH SELECTLEVEL
SW
BOOSTSW BOOST indicator
e.g.
SET
RETURN
AUD I O -  SPEAKER SETTINGS - TEST TONESPEAKER
LEFT
CENTER
RIGHT
SURROUND RIGHT
SURROUND LEFTTRIM LEVEL
  
0dB
  
0dB
0dB
EXIT : SETUP
Manual tuning
1Select “FM” or “AM”.≥Main unit:
Press [SELECTOR].
2Select the frequency.
≥Main unit:
Press [-TUNE MODE] to select 
“MANUAL” on the display, and then press 
[XTUNEW] to select the frequency.
≥To start automatic tuning, press and hold 
[6, 5] (main unit: [XTUNEW]) until 
the frequency starts scrolling. Tuning 
stops when a station is found.
FM/AM
,,
MENURETURN
ONE TOUCH PLAYSETUP
VOL
VOL
1
PA USE
23
56
89
0
10
4
7
DISC
DV D-2ND SELECTFM/AMiPod
SELECT
START
SKIP
SLOW / SEARCH
FUNCTIONSTOP MENU
-CD MODE
OK
STOPPLAY
OK&+4%60#8+)#614
Numbered
buttons
SELECTOR
TUNE
MEMORY
–TUNE MODE
FM/AM
Enjoying the FM/AM radio
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 29  Thursday, February 28, 2008  3:38 PM 
						

							30
RQTX0105
Operating other equipment
You can play an external source through your home theater system.
Preparation
Confirm the audio connection to the AUX terminal on the main unit (➜ 8).
≥Reduce the volume on the TV to its minimum, and then adjust the 
volume of the main unit.
≥You can enjoy surround sound effect when you press [ÎPLII] to turn 
on Dolby Pro Logic II (➜ 28).
Preparation
Confirm the audio connection to the OPTICAL IN terminal on the main 
unit (➜ 9).Select to suit the type of audio from the OPTICAL IN terminal on the main 
unit.
1 While in “D-IN” mode
Press [SETUP] to select “MAIN/SAP”, “DRC” or “PCM FIX”.
2 While the selected mode is displayed
Press [3,4] to make the setting.
MAIN/SAP mode
 (Only works with Dolby Dual Mono)
MAIN, SAP§, MAIN+SAP§ (stereo audio)§ “SAP” = Secondary Audio Program
Dynamic Range Compression
DRC ON: Adjust for clarity even when the volume is low by compressing 
the range of the lowest sound level and the highest sound level. 
Convenient for late night viewing. (Only works with Dolby 
Digital)
DRC OFF 
PCM FIX mode
PCM ON: Select when receiving only PCM signals.
PCM OFF: Select when receiving Dolby Digital and PCM signals.
[Note]
Audio that is input through the OPTICAL IN terminal cannot be output 
through the HDMI terminal.
Preparation
≥To view photos/videos from the iPod
– Ensure the video connection to the VIDEO OUT terminal on this unit 
(➜ 8).
– Operate the iPod menu to make the appropriate photo/video output 
settings for your TV. (Refer to operating instructions of your iPod.)
≥To display the picture, turn on the TV and select the appropriate video 
input mode.
≥Before connecting/disconnecting the iPod, turn the main unit off or 
reduce the volume of the main unit to its minimum.
Connect the iPod (not included) firmly.Recharging starts when the iPod is inserted.
≥Hold the dock when connecting/disconnecting the iPod.
≥Attach the dock adapter which should be supplied with your iPod to the 
dock for the stable use of the iPod. 
If you need an adapter, consult your iPod dealer.
Enjoying TV audio
Select “AUX”.
Enjoying digital audio
Select “D-IN” (Digital In).
,
RETURN FUNCTIONS PLAY iPodSOUND
-SLEEP-CH SELECTW.S.FL DISPLAYPLAYLISTMENURETURN
ONE TOUCH PLAYSETUP
VOL
VOL
1
PA USE
23
56
89
0
10
4
7
DISC
DV D-2ND SELECTFM/AMiPod
TVTV / VIDEO
PL
SELECT
SUBWOOFERLEVEL MUTING
START
SKIP
SLOW / SEARCH
FUNCTIONSTOP MENU
-CD MODE
SELECT
-PLAY MODE-REPEATCANCEL
STOPPLAY
OK&+4%60#8+)#614
,
PLII
OK
STOP,     PAUSE
SETUP
PLAY MODEREPEAT
SELECT
SELECT
Making settings for digital audio input
Using the iPod
Main unitiPod
Dock for iPod e.g.
Dock adapter 
(not included)
Operating other equipment
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 30  Thursday, February 28, 2008  3:38 PM