Panasonic Dvd Home Theater Sound System Sc Pt760 Operating Instructions

							11
Simple Setup
Digital transmitter connection / AC cord connections / Preparing the remote control
11
RQTX0105
Conserving power
The main unit and the wireless system consume a small amount of 
power when they are turned off (\U.S.A.\and\Canada] main unit: approx. 
0.3 W, wireless system: approx. 0.2 W, \Others] main unit: approx. 0.4 W, 
wireless system: approx. 0.3 W). To save power when they are not to be 
used for a long time, unplug them from the household AC outlet.
You will need to reset some memory items after plugging in the main unit.
[Note]
The included AC power supply cords are for use with the main unit and 
wireless system only. Do not use them with other equipment. Also, do 
not use cords for other equipment with the main unit or wireless system.
∫Batteries≥Do not use rechargeable type batteries.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct 
sunlight for a long period of time with doors and windows closed.
Do not:≥mix old and new batteries.
≥use different types at the same time.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can 
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a 
long period of time. Store in a cool, dark place.
∫Use
Aim at the remote control signal sensor (➜ 15), avoiding obstacles, 
at a maximum range of 7.0 m (23 ft) directly in front of the unit.
step
4Digital transmitter connection
TRANSMITTERDIGITALDo not insert or remove while 
the main unit is on.
Digital transmitter
Insert fully until you hear a click.
Main unit
step
5AC cord connections
AC INAC IN
110 127V 220 240V
VOLT ADJ
To  
household 
AC outletMain unit Wireless system
AC power 
supply cord
(included)[For\areas\except\U.S.A.[and\Canada]
Before connecting the AC power 
supply cord
Set the voltage.
Use a flat-head screwdriver to move the 
voltage selector to the appropriate position 
for the area in which this system is used.
Ferrite core≥If the power plug does not fit your 
AC  ou tle t
Use the power plug adaptor (included).
If it still does not fit, contact an electrical 
parts distributor for assistance.
AC power 
supply cord
(included)To  
household 
AC outlet
step
6Preparing the remote control
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only 
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
R6/LR6, AA
Insert so the poles (i and j) match those in the remote control.
Press in and lift up.
Replace the cover.
SC-PT760-960P-PC_Body2_Eng (PX).fm  Page 11  Friday, February 29, 2008  8:49 AM 
						

							12
Simple Setup
Performing QUICK SETUP
RQTX0105
The QUICK SETUP screen assists you to make necessary settings.
Preparation
Turn on your TV and select the appropriate 
video input mode (e.g. VIDEO 1, AV 1, HDMI, 
etc.).
≥To change your TV’s video input mode, refer 
to its operating instructions.
≥This remote control can perform some basic 
TV operations (➜ 14).
∫Details of settings
≥Underlined items are the factory settings in the above table.
step
7Perfor ming QUICK SETUP
SOUND
-SLEEP-CH SELECTW.S.FL DISPLAYPLAYLISTMENURETURN
ONE TOUCH PLAYSETUP
VOL
VOL
1
PA USE
23
56
89
0
10
4
7
DISC
DV D-2ND SELECTFM/AMiPod
TVTV / VIDEO
PL
SELECT
SUBWOOFERLEVEL MUTING
START
SKIP
SLOW / SEARCH
FUNCTIONSTOP MENU
-CD MODE
SETUP
DVD
RETURN
OK
-PLAY MODE-REPEATCANCEL
STOPPLAY
OK&+4%60#8+)#614
1Turn on the unit.
2Select “DVD/CD”.
3Show the setup menu.
4Select “OTHERS”.
5Select “QUICK SETUP”.
6Select “SET”.
7Select “Yes”.
8Follow the messages and 
make the settings.
≥MENU LANGUAGE
≥TV TYPE
≥TV ASPECT
To return to the previous screen, 
press [RETURN].
9Finish QUICK SETUP.
10Exit.
DV D
SETUP
SET
MAINDISC
VIDEO
AUD I O
DISPLAY
HDMI
OTHERS
EXIT : SETUP RETURN
OTHERSQUICK  SETUPSELECT  THE  MENU  LANGUAGE.
ENGLISH
FRANÇAIS 
ESPAÑOL
SET
RETURN
SETUP
MENU LANGUAGEChoose the language for the 
on-screen messages.≥ENGLISH≥FRANÇAIS≥ESPAÑOL
TV TYPESelect to suit the type of TV.≥STANDARD≥CRT≥LCD
≥PROJECTION≥PLASMA
TV ASPECTChoose the setting to suit your TV 
and preference.≥4:3PAN&SCAN≥4:3LETTERBOX≥4:3ZOOM
≥16:9NORMAL≥16:9SHRINK≥16:9ZOOM
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 12  Thursday, February 28, 2008  3:38 PM 
						

							13
Simple Setup
Presetting the radio stations
RQTX0105
Up to 30 stations can be set in each band, FM and AM.
≥“SET OK” is displayed when the stations are set, and the radio tunes 
to the last preset station.
≥“ERROR” is displayed when automatic presetting is unsuccessful. 
Preset the channels manually (➜ 29).≥The FM/AM setting is also shown on the TV display.
∫If noise is excessive
When “FM” is selected
Press and hold [-PLAY MODE] (main unit: [—FM MODE]) to 
display “MONO”.
Press and hold the button again to cancel the mode.
≥The mode is also canceled when you change the frequency.
When “AM” is selected
Press [FUNCTIONS]
 on the remote control.Each time you press the button: BP 2()BP 1
step
8Presetting the radio stations
Presetting stations automatically
1Select “FM” or “AM”.
≥Main unit:
Press [SELECTOR].
2Release the button when 
“FM AUTO” or “AM AUTO” is displayed.
e.g.
≥Main unit:
Press and hold [MEMORY].
The tuner tunes to the lowest frequency 
and starts to preset all the stations it can 
receive into the channels in ascending 
order.
FM/AM
,
SOUND
-SLEEP-CH SELECTW.S.FL DISPLAYPLAYLISTMENURETURN
ONE TOUCH PLAYSETUP
VOL
VOL
1
PA USE
23
56
89
0
10
4
7
DISC
DV D-2ND SELECTFM/AMiPod
TVTV / VIDEO
PL
SELECT
SUBWOOFERLEVEL MUTING
START
SKIP
SLOW / SEARCH
FUNCTIONSTOP MENU
-CD MODE
-PLAY MODE-PLAY MODE-REPEATCANCEL
STOPPLAY
OKFUNCTIONS&+4%60#8+)#614
OK
Numbered
buttons
SELECTOR
TUNE
MEMORY
-TUNE MODE
/—FM MODE
FM/AM
(press and hold)
W
P
Confirming the preset channels
1Select “FM” or “AM”.≥Main unit:
Press [SELECTOR].
2Select the channel.≥To select a 2-digit number
e.g. 12: [S10] ➜ [1] ➜ [2]
Alternatively, press [X,W].
≥Main unit:
Press [-TUNE MODE] to select 
“PRESET” on the display, and then press 
[XTUNEW] to select the channel.
When a stereo FM broadcast is being 
received, “ST” lights in the display.
FM/AM
123
56
89
0
10
4
7
ST
MONO
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 13  Thursday, February 28, 2008  3:38 PM 
						

							14
Control reference guide
RQTX0105
Other Panasonic audio/video equipment may start functioning when you 
operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote control 
operating mode to “REMOTE 2”.
The main unit and remote control must be set to the same mode.
1 Press and hold [9/5] on the main unit and [2] on the remote 
control until the main units display shows “REMOTE 2”. 
2 Press and hold [OK] and [2] on the remote control for at least 2 
seconds.
To change the mode back to “REMOTE 1”, repeat both steps above by 
replacing [2] with [1].
A[DVD]: Select disc as the source (➜ 12): DVD/CD
[FM/AM]: Select FM/AM tuner (➜ 13, 29)
[N,OSELECT]: Select FM/AM tuner or external audio as the 
source (➜ 30)
DVD/CD#FM#AM#AUX#D-IN#IPOD
^--------------------------------------------------------------}
The below function is available only when using the optional 
Panasonic wireless sound system SH-FX85.
[—2ND SELECT]
: Press and hold the button to change the source 
for the second room;
MAIN SOURCE (follows the selected source for the main room)# 
(FM#AM)
§#IPOD# Return to MAIN SOURCE
§If the main room is in FM/AM mode, you can only select the same 
mode for the FM/AM tuner of the second room.
For details, refer to the operating instructions for the optional 
Panasonic wireless sound system SH-FX85.
Avoiding interference with other Panasonic 
equipment
-PLAY MODE-REPEATSOUND
-SLEEP-CH SELECT
W.S.
FL DISPLAY
CANCEL
PLAYLIST
MENURETURN
OK
ONE TOUCH PLAYSETUP
VOL
VOL
STOP
1
PA USEPLAY
23
56
89
0
10
4
7
DISC
-2ND SELECT
iPod
TVTV/VIDEO
PL
SUBWOOFERLEVEL MUTING
START
SKIP
SLOW / SEARCH
FUNCTIONSTOP MENU
&+4%60#8+)#614
-CD MODE3
5
618
7
9
12
10
2
11
13
20
8
21
24
2223
25
14
16
15
19
1
A
417
DV DFM/AM
SELECT
1Turn the main unit on/off (➜ 12)
2Select channels and title numbers etc. / Enter numbers
(➜ 13, 17)
3Select a disc / Play all loaded CDs sequentially (➜ 17, 18)
4Select preset radio stations (➜ 29)
5Basic operations for play (➜ 16, 17)
6Show setup menu (➜ 12)
7Show a disc top menu or program list (➜ 17, 19)
8Select or confirm menu items / Frame-by-frame  (➜ 17)
9Show a disc menu or play list (➜ 17, 19)
:Select sound mode (➜ 28)
;Turn Dolby Pro LogicII on/off (➜ 28)
TV operations Aim the remote control at the Panasonic TV and press the button.
[ÍTV]: Turn the TV on/off
[TV/VIDEO]: Change the TV’s video input mode
[r, s]: Adjust the TV volume
This may not work properly with some models.
?Select iPod as the source (➜ 30)
@Adjust the volume of the main unit
ASelect radio stations manually (➜ 29)
BStart up and play a disc automatically (➜ 17, 26)
CShow START menu (➜ 15)
DShow on-screen menu (➜ 20)
EReturn to previous screen (➜ 17)
FSwitch information on the main unit’s display (➜ 17)
GSelect the play mode / Set the repeat mode (➜ 18)
HMute the sound
≥“MUTING” flashes on the main unit’s display while the function is 
on.
≥To cancel, press the button again or adjust the volume.
≥Muting is canceled when you switch the unit to standby.
IAdjust the subwoofer level or select speaker channel 
(➜ 29)
AUT
O OPERA
TION
 ON
/OF
FP
O
W
E
R
AUTO OPERATION ON/OFF indicator
The indicator lights red when the wireless system is turned on and 
lights green when the wireless link is activated.
When the wireless link is inactive for a long time, it turns red.
Unit on/off button
[POWER CI, BÍ]
Use this button to turn the 
wireless system on and off.
CI:  This unit is on.
BÍ:This unit is off.
Control reference guide
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 14  Thursday, February 28, 2008  3:38 PM 
						

							15
Control reference guide / Utilizing the START menu
15
RQTX0105
You can select desired source or access playback/menus by using the 
START menu.
When “Input select” is selectedYou can select a desired source from the menu.
≥DVD/CD (➜ 12), FM (➜ 13), AM (➜ 13), AUX§ (➜ 30), 
DIGITAL IN§ (➜ 30), iPod (➜ 30)§ “(TV)” will appear beside “AUX” or “DIGITAL IN”, indicating the TV audio 
setting for VIERA Link “HDAVI Control” (➜ 26).
Press [3,4], then press [OK] to make the settings.When a disc is loaded, you can also access playback or menus from the 
START menu.
e.g. [DVD-V]
When the on-screen control panel appears
e.g. [DVD-V] (when “Playback Disc” is selected from the START menu)
You can operate the playback with the indicated controls.
Utilizing the START menu
VOLUME
POWERSELECTOR TUNEMEMORYTUNE MODE FM MODESW
BOOSTOPEN CLOSE5 DISC
SELECTOREXCHANGE12345
131514
143689
1112
SW
BOOST
O
P
E
NC
L
O
S
E
10
572
1Standby/on switch [POWER Í/I]
Press to switch the unit from on to standby mode or vice 
versa. In standby mode, the unit is still consuming a small 
amount of power. (➜ 16)
25 DISC SELECTOR
Select a disc directly (➜ 16)
3Disc exchange
Open the disc tray to exchange the disc. (➜ 16)
4Open/Close the disc tray (➜ 16)
5Turn Subwoofer Boost on/off (➜ 29)
6Select the source
DVD/CD#FM#AM#AU X#D-IN#IPOD
^--------------------------------------------------------------}
7Skip or slow-search play  / Select the radio stations 
(➜ 13, 16)
8Stop playing  /  Select the tuning mode / Adjust the FM 
reception condition (➜ 13, 16)9Play discs  /  Memorize the receiving radio stations
(➜ 16, 29)
:Connect iPod (➜ 30)
;Remote control signal sensor

[PT960] Jog LEDLights when the unit is turned on.
?Connect headphones (not included)Headphone plug type: ‰3.5 mm (1/8z) stereo mini plug
≥Reduce the volume before connecting.
≥Audio is automatically switched to 2-channel stereo.
≥To prevent hearing damage, avoid listening for prolonged periods 
of time.
Excessive sound pressure from earphones and headphones can 
cause hearing loss.
1Show the START menu.e.g.
2Select an item.
≥To exit press [START].
DVD/CD Home theater
OK
RETURN
Input select
DVD/CD Home theater
OK
RETURN
Input select Playback Disc
TOP  MENU (DVD)
MENU (DVD)
Playback/menu 
access
SEARCHRETURN SEARCH
PLAYPAUSE
STOP
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 15  Thursday, February 28, 2008  3:38 PM 
						

							16
Basic play
RQTX0105
Basic play
Preparation
To display the picture, turn on your TV and change its video input mode.
[Note]
≥DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED. To preserve the unit’s motor and your TV screen, press [∫] (Stop) when you are 
finished with the menus.
≥Total title number may not be displayed properly on iR/iRW.
Using the main unit
VOLUME
OPENCLOSE
SELECTOR12
3
4
MEMORY5
, +  VOLUME EXCHANGE
5 DISC
SELECTOR12345
POWER
TUNE
Start play.
≥Tu r n  [`, i VOLUME] to 
adjust the volume.
≥You can enjoy surround 
sound when you press 
[ÎPLII] on the remote 
control to turn on Dolby Pro 
LogicII (➜ 28).
(Stop)
Select “DVD/CD”. Turn on the unit.
Press to skip.
Press and hold to
– search during play
– start slow-motion play during pause
≥Press [1] (Play) to start normal play.
Open all the disc trays.
≥To select a desired tray (➜ below, Selecting the desired tray).
≥Press [
						

							17
Basic play
RQTX0105
If you are experiencing problems, refer to troubleshooting (➜34 to 36).
Using the remote control
One touch 
playThe main unit automatically turns 
on and starts playing the disc in 
the tray.
Stop
The position is memorized while 
“RESUME STOP” is on the screen.
≥Press [1PLAY] to resume.
≥Press [∫STOP] again to clear 
the position.
Pa us e
≥Press [1PLAY] to restart play.
Skip
Search(during play)
≥Up to 5 steps.
≥Press [1PLAY] to start normal 
play.
Slow-motion(during pause)
≥[VCD] Slow-motion: Forward 
direction only.
Frame-by-
frame
(during pause)
[DVD-VR] [DVD-V] [VCD]
≥[DVD-VR] [VCD] Forward direction 
only.
On-screen 
item select
,SKIP
STOP,     PAUSESLOW/SEARCH,
OK
SOUND
-SLEEP-CH SELECTW.S.FL DISPLAYPLAYLISTMENURETURN
ONE TOUCH PLAYSETUP
VOL
VOL
1
PA USE
23
56
89
0
10
4
7
DISC
DV D-2ND SELECTFM/AMiPod
TVTV / VIDEO
PL
SELECT
SUBWOOFERLEVEL MUTING
START
SKIP
SLOW / SEARCH
FUNCTIONSTOP MENU
-CD MODE
MENU, PLAY LIST
TOP MENU,
DIRECT NAVIGATOR
RETURN
FL DISPLAY
ONE TOUCH  PLAY
5
-PLAY MODE-REPEATCANCEL
STOPPLAY
OK
DISC
1
2
&+4%60#8+)#614
Numbered
buttons
ONE TOUCH  PLAY
STOP
PA USE
SKIP—
SLOW / SEARCH
OK
Select
Confirm
OK—
Selecting a 
disc
Disc information screen is 
displayed.
≥To exit the screen, press [DISC].
e.g. [DVD-V]
Enter 
number
[DVD-VR] [DVD-V] [VCD] [CD]
e.g. To select 12:
[S10] ➜ [1] ➜ [2]
[VCD] with playback control
Press [∫STOP] to cancel the PBC 
function, and then press the 
numbered buttons.
[DVD-V]
Shows a disc top menu.
[DVD-VR]
Press the button to show the 
programs (➜ 19).
Disc menu
[DVD-V]
Shows a disc menu.
[DVD-VR]
Press the button to show a play list 
(➜ 19).
[VCD] with playback control
Shows a disc menu.
Return to 
previous 
screen
Main unit 
display
[DVD-VR] [DVD-V] [WMA] [MP3] 
Time display
,-. Information display
(e.g. [DVD-VR] Program 
number)
[JPEG]
SLIDE
,-.Contents number
OK
DISC
123
5
4
Select
Confirm
orDISC CHANGE
CD
DATA-DISC
UNCHECKED
NO DISC DVD-VIDEO 12345
Not yet read Empty tray
123
56
89
0
10
4
7
DIRECTNAVIGATOR
MENU
PLAY
LIST
RETURN
RETURN—
FL DISPLAY
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 17  Thursday, February 28, 2008  3:38 PM 
						

							18
Other playback functions
RQTX0105
Other playback functions
This feature allows you to play all loaded CDs sequentially. Select an 
applicable disc before playing (➜ 17, Selecting a disc).
≥If all loaded discs are DVDs, CD Mode does not work.
≥Video CD playback control are disabled.
≥You cannot turn CD Mode on or off during program or random mode.
≥If you want to play a DVD, press and hold [—CD MODE] again while 
stopped to cancel CD Mode. (CD Mode is also canceled when you 
switch the unit to standby, select another source, or when the disc tray is 
opened.)
This works only when the elapsed play time can be displayed. It also 
works with all JPEG content.
Items shown differ depending on the type of disc and playback mode.
To enjoy program or random play with:
– 1 disc : ensure CD Mode (➜ above) is off
– all discs: ensure CD Mode is on
≥[DVD-VR] Select “DATA” in “DVD-VR/DATA” (➜ 24, “OTHERS” menu) to 
play WMA, MP3 or JPEG contents.
≥[DVD-V] Some items cannot be played even if you have programmed 
them.
∫All-Disc program (when CD Mode is on)[VCD] [CD] You can program all the items on all the discs.
1Press [3,4], and then press [OK] to select the disc.
2Press [3,4], and then press [OK] to select the track.
3Repeat step 1 and 2 to program other items.
≥To return to the previous menu, press [RETURN].
4Press [1PLAY].
To select all the items
Press [3,4] to select “ALL” and press [OK].
To clear the selected program
1 Press [1] and then press [3,4] to select the program.
2 Press [CANCEL].
To clear the whole program
Press [1] several times to select “CLEAR ALL”, and then press [OK]. 
The whole program is also cleared when the disc tray is opened, the unit 
is turned off or another source is selected.
∫All-Disc random (when CD Mode is on)[VCD] [CD] You can playback all the 
items on all the discs in random order.
Press [1PLAY].
Playing CDs sequentially (CD Mode)
[VCD] [CD] [WMA] [MP3]
While stopped
Repeat play
1During playShow the repeat mode.
2While the repeat 
mode is displayedSelect an item to be repeated.
e.g. [DVD-V]
`TITLE ---. `CHAP. ---. `OFF
^------------------------------------------------------b
≥To cancel, select “OFF”.
Program and Random play
While stoppedSelect the play mode.Program and random playback screens 
appear sequentially.
Program ------------------------------------------) Random
^--- Exit program and random screens (}
SOUND
-SLEEP-CH SELECTW.S.FL DISPLAYPLAYLISTMENURETURN
ONE TOUCH PLAYSETUP
VOL
PA USE
010DISC
PLSUBWOOFERLEVEL MUTING
START
SKIP
SLOW / SEARCH
FUNCTIONSTOP MENU
-CD MODE
CANCEL
STOP
– CD  MODE
PLAY
PLAY MODE
REPEAT
RETURN
OK
-PLAY MODE-REPEATCANCEL
STOPPLAY
OK&+4%60#8+)#614
DISC
-CD MODE
PLAY
(press and hold)W1 W2CDP.MODE
-REPEAT-PLAY MODE
(press and hold)
-REPEAT-PLAY MODE
-REPEAT-PLAY MODE
Program play (up to 30 items)
∫1-Disc program
[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] You can program all the items on a 
disc in the selected tray.
1Select an item.
e.g. [DVD-V]
≥Repeat this step to program other items.
≥To return to the previous menu, press 
[RETURN].
2Start play.
Random play
∫1-Disc random
[VCD] [CD] You can playback all the items on a disc in the selected tray in 
random order.
[DVD-V] [WMA] [MP3] [JPEG] You can playback selected item(s) on a disc in 
the selected tray in random order.
1(Only when the disc has groups or multiple titles.)
Select a group or title.
≥“¢” represents 
selected. To 
deselect, press 
[OK] again.
2Start play.
DVD-V  PROGRAM
SELECT TITLETITLE CHAP.
TITLE  1
TITLE  2
TITLE  3
TITLE  41
2
3
4
5
6
7
8
9
10
START:PLAY
CLEAR ALL
PLAY
DVD-V  RANDOM
SELECT  TITLE
TITLE  1
TITLE  2
TITLE  3
PRESS PLAY TO STARTe.g. [DVD-V]
PLAY
ALL DISC RANDOM
PRESS PLAY TO STA R T
e.g. [CD]
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 18  Thursday, February 28, 2008  3:38 PM 
						

							19
Using navigation menus
RQTX0105
Using navigation menus
[DVD-VR] Select “DATA” in “DVD-VR/DATA” (➜ 24, “OTHERS” menu) to 
play WMA, MP3 or JPEG contents.
You can select to play from your desired item while the “DATA-DISC” 
screen is displayed.
e.g.
≥To display/exit the screen, press [MENU].
Play starts from the selected content.
∫Selecting the picture in Thumbnail menu
[JPEG]
To go to other group
1 Press [3] to select the group name.
2 Press [2,1] to select the group and press [OK].
≥Titles appear only if the titles are recorded on the disc.
≥You cannot edit programs, play lists and disc titles.
This works only when the disc contains a play list.
Playing data discs[WMA] [MP3] [JPEG]
Playing from the selected item
Select an item.≥To return to the previous screen, press 
[RETURN]. 
≥Maximum: 12 characters for file/folder name.
SOUND
-SLEEP-CH SELECTW.S.FL DISPLAYPLAYLISTMENURETURN
ONE TOUCH PLAYSETUP
VOL
1
PA USE
23
56
89
0
10
4
7
DISC
-2ND SELECT
PL
SELECT
SUBWOOFERLEVEL MUTING
START
SKIP
SLOW / SEARCH
FUNCTIONS
-CD MODE
-PLAY MODE-REPEATCANCEL
STOPPLAY
OKTOP MENU&+4%60#8+)#614
,SKIP
MENU,
PLAY LIST
STOP
OK
DIRECT NAVIGATORTOP MENU
RETURN
DATA-DISC
ROOT
Perfume
My favorite1
My favorite2
My favorite3
Underwater
Fantasy planet
City of cascade
Infinite unitLady Starfish
Metal Glue
Life on Jupiter
Starpersons1
Starpersons2
OK
Group (Folder):
Content (File):
: WMA/MP3
: JPEG
1While picture is 
displayede.g.
2Select a picture.≥Press [:,9SKIP] to skip page by 
page.
Playing RAM and DVD-R / -RW (DVD-VR) discs
[DVD-VR]
Playing the programs
1While stopped
≥To exit the screen, press [DIRECT 
NAVIGATOR].
2Select the program.≥Press [2,1] to skip page by page.
Playing a play list
1While stopped
≥To exit the screen, press
 [PLAY LIST].
2Select the play list.≥Press [2,1] to skip page by page.
TOPMENUDIRECTNAVIGATOR
JPEG  imagesG 1/  1:C 3/ 9
Group nameGroup and content 
number
TOPMENUDIRECTNAVIGATORPG
DATELENGTH
TITLE
1
0:16:02 10/11
LIVE CONCERT
02:15
2
0:38:25 12/05
AUTO ACTION
3
1:16:05 04/03
CINEMA
02:10 01:30
OK
RETURNe.g.
MENU
PLAY
LISTPL
DATELENGTH
TITLE
1
0:00:10 11/11
CITY PENGUIN
00:01
2
0:01:20 12/01
FOOTBALL
3
1:10:04 01/02
SPECIAL
01:10 01:20
OK
RETURNe.g.
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 19  Thursday, February 28, 2008  3:38 PM 
						

							20
Using on-screen menus
RQTX0105
Using on-screen menus
∫Menu 1 (Disc/Play)
SOUND
-SLEEP-CH SELECTW.S.FL DISPLAYPLAYLISTMENURETURN
ONE TOUCH PLAYSETUP
VOL
VOL
1
PA USE
23
56
89
0
10
4
7
DISC
DV D-2ND SELECTFM/AMiPod
TVTV / VIDEO
PL
SELECT
SUBWOOFERLEVEL MUTING
START
SKIP
SLOW / SEARCH
FUNCTIONS
-CD MODE
-PLAY MODE-REPEATCANCEL
STOPPLAY
OKTOP MENU
PLAY
FUNCTIONS
RETURN
CANCEL
&+4%60#8+)#614
OK
Numbered
buttons
1Show the on-screen 
menu.
Each time you press the button:
Menu 1 (Disc/Play)
Menu 2 (Video)
Menu 3 (Audio)
Menu 4 (HDMI)
Exit
e.g. Menu 1 (Disc/Play) [DVD-V]
2Select the item.e.g. Menu 1 (Disc/Play) [DVD-V] 
3Make the settings.
4Exit.
T1C1
1:ENG
3/2.1 :EOFF
TITLE  SEARCH
Current item
Item name
T1C1
1:ENG
3/21 : OFF
CHAPTER  SEARCH
Current setting
RETURN
Items shown differ depending on the type of disc.
TRACK SEARCH
TITLE SEARCH
CONTENT SEARCH
CHAPTER SEARCH
PG SEARCH
(Program Search)
PL SEARCH
(Playlist Search)To start from a specific item
≥[VCD] This does not work when using playback 
control.
e.g. [DVD-V] : T2 C5
To select numbers for data disc
e.g. 123: [S10] ➜ [1] ➜ [2] ➜ [3] ➜ [OK]
AU D IO
[DVD-V] (with multiple soundtracks)
To select audio soundtrack
[DVD-VR] [VCD] 
To select “L”, “R”, “L+R” or “L R”
[DVD-V] (Karaoke disc)
To select “ON” or “OFF” for vocals
To select “OFF”, “V1”, “V2” or “V1+V2” for 
vocal selections
Actual operations depend on the disc. Read the 
disc’s instructions for details.
Signal type/data
LPCM/PPCM/ÎD/DTS/MP3/MPEG: Signal type
kHz (Sampling frequency)/bit/ch (Number of 
channels)
3/2 .1ch
.0: No surround
.1: Mono surround
.2: Stereo surround (left/right).1: Low frequency effect(not displayed if there is no signal)
.1: Center
.2: Front leftiFront right
.3: Front leftiFront rightiCenter e.g.
PLAY SPEED
[DVD-VR] [DVD-V]
To change play speed
– from “k0.6” to “k1.4” (in 0.1-unit steps)
≥Press [1PLAY] to return to normal play.
≥After you change the speed
– Dolby Pro Logic II has no effect.
– Audio output switches to 2-channel stereo.
– Sampling frequency of 96 kHz is converted to 
48 kHz.
≥This function may not work depending on the 
disc’s recording.
REPEAT MODE
(➜ 18, Repeat play)
A-B Repeat (To repeat a specified section)Except [JPEG] [DVD-VR] (Still picture part)
[VCD] (SVCD)
Press [OK] at the starting and ending points.
≥Select “OFF” to cancel.
SUBTITLE
[DVD-V] (with multiple subtitles) 
[VCD] (SVCD only)
To select subtitle language
≥On iR/iRW, a subtitle number may be shown 
for subtitles that are not displayed.
[DVD-VR] (with subtitle on/off information)
To select “ON” or “OFF”
≥This may not work depending on the disc.
ANGLE
[DVD-V] (with multiple angles)
To select a video angle
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book  Page 20  Thursday, February 28, 2008  3:38 PM