Home
>
Panasonic
>
DVD System
>
Panasonic Dvd Home Theater Sound System Sc Ht670 Operating Instructions
Panasonic Dvd Home Theater Sound System Sc Ht670 Operating Instructions
Have a look at the manual Panasonic Dvd Home Theater Sound System Sc Ht670 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 RQT7534 10HBI 10HBI 10HBI Radio operations L FM frequency settingsYou can change the FM step. The step is factory-set to 0.2 MHz, but you can change it to receive broadcasts allocated 0.1 MHz steps. 1 Press [TUNER/BAND] to select “FM”. 2 Press and hold [SELECTOR] on the main unit. After a few seconds the display changes to show the current minimum frequency. Continue to hold the button down. The minimum frequency changes and the step is changed. To return to the original step, repeat the above steps. Note Any FM/AM frequencies preset in channels will be changed by this procedure. Preset them again. Preset tuning There are two methods of pre-setting stations. Automatic presetting:All the stations the tuner can receive are preset. Manual presetting:You can select the stations to preset and the order they are preset in. Up to 15 stations can be set in each, the FM and AM bands. Automatic presetting Do the following once For each, FM and AM. Tune to the frequency where pre-setting is to begin. Press and hold [ENTER] until the frequency changes. ¡ Main unit: Press and hold [MEMORY]. The tuner presets all the stations it can receive into the channels in ascending order. “SET OK” is displayed when the stations are set. The last station to be set is then played. L “ERROR” is displayed Presetting was unsuccessful. Preset manually. Manual presetting 1Tune to the station (A see left: “Manual tuning”). 2Press [ENTER]. 3While “PGM” is flashing Press the numbered buttons to select a channel. Alternatively, press [2 CH 1] then press [ENTER]. The station occupying a channel is erased if another station is preset in that channel. Selecting channels 1Press [TUNER/BAND] to select “FM” or “AM”. 2Press the numbered buttons or [4 CH 3] to select the channel. To select a 2-digit number Example: To select channel 12, press [X10] A [1] A [2] Control reference guide TUNER/BAND FM MODE MEMORY 3 TUNING 4 SELECTORVOLUME, DOWN, UP ENTER Numbered buttons ( ) 4CH3 /TUNE MODE VOLUME – + Manual tuning 1Press [SELECTOR] to select “FM” or “AM”.Each time you press the button: DVD/CD→FM→AM→TV→VCR→AUX ¡ Remote control: Press [TUNER/BAND]. 2Press [/TUNE MODE] to select “MANUAL”. Each time you press the button: MANUAL ↔ PRESET 3Press [3 TUNING] or [TUNING 4] to select the frequency of the required station. ¡ Remote control: Press [(] or [)]. TUNED: Displayed when a radio station is tuned. ST: Displayed when a stereo FM broadcast is being received. Press and hold [1 TUNING] or [TUNING 2] until the frequency starts scrolling to start automatic tuning. Tuning stops when a station is found. 4Adjust the volume. L If noise is excessive in FMPress [FM MODE] to display “MONO”. Press [FM MODE] again to cancel the mode. The mode is also canceled when you change the frequency. The radio RQT7534(2)PC(10-11)11/2/04, 2:19 pm 11
RQT7534 12 Before Before Before Before Before Before Disc operations 3Press [OPEN/CLOSE c] to close the drawer. The disc indicator lights orange to show the tray is in the play position. 4Press [:] (play). Play begins. (CD text only) ¡Press [SUBTITLE] to turn the display on or off. ¡You can also use the navigation menus to control play (A page 18). 5Adjust the volume. L To pause play Press [J] during play. Press [ : :: : :] (play) to restart play. L To stop play Press [ L LL L L ] (A page 13, Resume function). L To select a disc Press [SHIFT] + disc button ([DISC 1]–[DISC 5]). L To prevent damage Do not; ¡ load more than one disc per tray. ¡ close the drawer by hand. Note ¡ If “ ” appears on the television The operation is prohibited by the unit or disc. ¡ It may take some time for play to start but this is normal. When a menu appears on the television Press the numbered buttons to select an item.To select a 2-digit number Example: To select item 23, press [X10] A [2] A [3]. ¡ When playing DVDs, you can also use [8, 9, ;, :] to select items. Press [ENTER] to confirm your selection. To return to the menu screen [TOP MENU]: Shows the first menu screen. [MENU]: Shows the menu screen. [RETURN]: Shows the menu screen. Note The disc continues to rotate while the menu is displayed even after you finish playing an item. Press [L] when you finish to preserve the unit’s motor and your television screen. Sequential play (CD Mode) The unit usually plays the disc in the play position and then stops. Turn CD Mode on to play all loaded discs, except for DVDs and JPEG discs. While stopped Press [CD /TUNE MODE].¡ Remote control: Press [CD MODE]. Each time you press the button: CD(on) ↔ CD(off) Note ¡ HighMAT menus and video CD playback control are disabled. ¡ Only audio tracks can be played on HighMAT discs. ¡ You cannot change the mode during play. ¡ CD Mode turns off when you switch the unit to standby. Preparation¡Press [f] to turn on the unit. ¡Turn on the television and select the appropriate video input on the television to suit the connections for the unit. 1Press [DVD/CD] to select “DVD/CD” as the source. To enjoy progressive video Press [PROGRESSIVE]. The television will be disrupted for a moment but this is normal. ¡Output from this unit is interlace if you have connected to the television through the VIDEO OUT or S-VIDEO OUT or are playing PAL discs, even if “PROG.” is on the display. ¡When progressive output is on, closed captions will not be displayed. 2Press [OPEN/CLOSE c] to open the drawer and place a disc on the disc tray. To load discs onto the other trays, refer to “Changing the disc”. (A page 13) If the disc contains both audio data (WMA and MP3) and JPEG, press [TOP MENU] to select “All” (JPEG/WMA/MP3), “Audio” (WMA/MP3) or “Picture” (JPEG) in the Playback Menu. ¡Remove TYPE 2 and 4 discs from their cartridges before use. ¡Label-up (With double-sided discs, load so the label for the side you want to play is facing up.) OPEN/CLOSE cL f 89; :ENTER SKIP g f g/( )/f SLOW/SEARCH ( ) Numbered buttonsDISC 1– DISC 5 DISC CHECK VOLUME : PROGRESSIVE DISC CHANGE c DVD/CD J: L MENU RETURN SUBTITLE CD MODE TOP MENU POSITION MEMORYQUICK REPLAYSHIFTPAG E DISC 1–DISC 5 /TUNE MODE VOLUME – + Discs—Basic play Do not push the tray with your hand. Do not pull the tray. RQT7534(2)PC(12-13)10/2/04, 4:46 pm 12
13 RQT7534 10HBI 10HBI 10HBI 10HBI Disc operations Starting play from a selected item Press the numbered buttons to select the item.Play starts from the selected item. To select a 2-digit number Example: To select item 23, press [ X10] A [2] A [3]. [2] A [3] A [ENTER]. Note ¡This works only when stopped with some discs. ¡When playing DVD-Audio and you want to start play from a track in a different group, select the group first (A page 14). Selecting still pictures—Page skip During play or while paused Press [SHIFT]+[PAGE]. The page changes each time you press the button. ¡ Press [RETURN] to go back to page 1. Skipping items During play or while paused Press [g] or [f] on the remote control. ¡ Press [g/(] or [)/f] on the main unit. Press [8] or [9] for group skip. ¡Each press increases the number of skips. Example Fast forward and rewind—SEARCH During play Press [(] or [)]. ¡Press and hold [g/(] or [)/f] on the main unit. ¡Audio will be heard during search for most discs. You can turn this audio off if you want to (A page 28, Audio—Audio during Search). ¡ You can slow down or speed up play (A page 20). Slow-motion play (Motion picture parts only) While paused Press [(] or [)]. ¡Press and hold [g/(] or [)/f] on the main unit. Frame-by-frame viewing (Motion picture parts only) While paused Press [;] or [:].The frame changes each time you press the button. ¡The frames change in succession if you press and hold the button. ¡Pressing [J] also activates forward frame-by-frame. Notes ¡The speed of search and slow-motion increases up to 5 steps. ¡Press [:] (play) to restart play. ¡You cannot move backwards with Video CD during frame-by- frame and slow-motion. When playing Video CDs with playback control Pressing buttons to perform skip, search or slow-motion may take you to a menu screen. Changing the disc You can change the other discs without interrupting play.Main unit only 1Press [DISC CHANGE c]. 2Within about 10 secondsPress [DISC 1] – [DISC 5] to open the tray and change the disc. Press [DISC CHANGE c cc c c] again to close the tray. Repeat steps 1 and 2 to change other discs. You can load up to 5 discs. Checking the disc trays You can check whether a 12 cm disc is in a tray without interrupting play. Main unit only Press [DISC CHECK]. If the player is stopped, all trays will open. If a disc is being played, the corresponding tray will not open. Press [DISC CHECK] again to close the trays. ¡ Do not remove or insert discs during a disc check. ¡ Do not pull out the trays during a disc check. Position Memory function (Only when the elapsed play time can be displayed.) : Works with all JPEG content. During play Press [POSITION MEMORY] to memorize a position. Position memorized Press again to replace the position. This position is saved even if you turn the unit off, change the source or change discs. When you turn the unit on, reselect “DVD/ CD” or reinsert the disc whose position you memorized, “RESUME” lights on the display. Press [:] (play) to start play from the memorized position. The position is cleared. ¡After changing the source or selecting another disc, re-selecting the disc tray with the memorized position automatically starts playback. ¡You can memorize positions on up to five different discs at a time. When you memorize another position, the earliest position is replaced. ¡You cannot recall the position in CD Mode. Resume function “RESUME” lights on the display when the unit has recorded the position at which you stopped play. Press [:] (play) to start play from that position. ¡ The position is cleared when you: – Turn the unit off. – Select another source or change discs. ¡Press [L] to clear the position. Chapter Preview The following message appears immediately after you press [:] (play) when “RESUME” is displayed. Press [:] (play) while the message is displayed and the beginning portions of each chapter up to the current one are played. Full play resumes from the point where you pressed [L] or [POSITION MEMORY]. (This feature works only within a title.) If you do not press [:] (play), the message disappears and play starts from where you pressed [L] or [POSITION MEMORY]. Replaying a scene—QUICK REPLAY (Only when the elapsed play time can be displayed) Skip back a few seconds. During play Press [QUICK REPLAY]. Note This feature may not work while playing some parts of a disc or at all with some discs. Press PLAY to preview chapters PAGE 1 Play position Mar ker Program/SceneProgram/Scene Program/Scene Once Once twice three times twice RQT7534(2)PC(12-13)10/2/04, 4:46 pm 13
RQT7534 14 Before Before Before Before Before Before Disc operations Discs—Convenient functions Selecting groups to play 1Press [GROUP]. Example 2Press the numbered buttons to select the group and press [ENTER]. ¡ ¡¡ ¡ ¡Playing all the groups in succession (A Page 15, All group play) ¡Playing bonus groups Some discs contain bonus groups. If a password screen appears after selecting a group, enter the password with the numbered buttons. Refer also to the disc’s jacket. Repeat play (Only when the elapsed play time can be displayed.) : Works with all JPEG content. During play Press [SHIFT]+[REPEAT]. Each time you press the button: PG REPEAT→ALL REPEAT (Entire disc)→REPEAT OFF ¡During play list play SCENE REPEAT→PL REPEAT→REPEAT OFF CHAPTER REPEAT→TITLE REPEAT →REPEAT OFF (There is no on-screen display.) TRACK REPEAT→ALL REPEAT (Entire disc)→REPEAT OFF TRACK REPEAT→GROUP REPEAT →REPEAT OFF (There is no on-screen display.) CONTENT REPEAT→GROUP REPEAT →REPEAT OFF (There is no on-screen display.) GROUP REPEAT →REPEAT OFF During all group (), program and random play “ALL REPEAT” is displayed. ¡You can also repeat play of content and group on HighMAT discs. ¡When CD Mode is on, you can only select “ALL RPT” (All Repeat) and “RPT OFF” (Repeat Off). LTo repeat only your favorite tracks/chapters Start program play (A page 15) and press [SHIFT]+[REPEAT] to select the repeat mode. A-B repeat play (Only when the elapsed play time can be displayed.) (Except still picture part) You can repeat a section between points A and B within a program, title or track/content. 1During playPress [DISPLAY] (A page 21).2Press [8, 9] to select “Other Settings” and press [ENTER]. 3Press [8, 9] to select “Play Menu” and press [ENTER]. Example 4Press [8, 9] to select “A-B Repeat” and1 11 1 1 Press [ENTER] at the starting point (A). 2 22 2 2 Press [ENTER] at the finishing point (B). A-B repeat starts. To return to normal play Press [ENTER] again. To clear the menus Press [RETURN] until the menus disappear. Note A-B repeat is canceled when you press [QUICK REPLAY]. Audio “ – ”, “– –” or “– – –” is displayed instead of the language number in circumstances such as when no language is recorded on the disc. (SVCD only) Soundtrack and subtitle numbers may change even if corresponding soundtracks are not recorded. (Discs with multiple soundtracks) During play Press [AUDIO]. The number changes each time you press the button. Example ¡You can also use this button to turn the vocals on and off on karaoke discs. Read the disc’s instructions for details. ¡Play restarts from the beginning of the soundtrack when changing soundtracks that are accompanied by still pictures. ¡Even if a second soundtrack isn’t recorded, two soundtrack numbers will normally be shown when you press [AUDIO]. The soundtrack currently playing is number 1. Signal type/data LPCM/PPCM/pDigital/DTS: Signal type (kHz): Sampling frequency (bit): Number of bits (ch): Number of channels Example: 3/2 .1ch .1: Low frequency effect (not displayed if there is no signal) 0: No surround 1: Mono surround 2: Stereo surround (left/right) 1: Center 2: Front left+Front right 3: Front left+Front right+Center Menu Audio L R L R L R Menu Audio 1(1) 1 LPCM 48kHz 24bit 2ch 2 89; :ENTERNumbered buttons REPEAT PLAY MODERETURN : L AUDIO SUBTITLE DISPLAY CANCEL DISC 1– DISC 5 SHIFT PAG E GROUPQUICK REPLAY Menu Audio 1 1 English pDigital 3/2.1ch Signal type/data (A below) Number of channels (A below) Audio language Menu Repeat Chapter A–B Repeat Marker * * Menu Group Search 2 Group number RQT7534-3P PC(14)16/3/04, 5:59 pm 14
15 RQT7534 10HBI 10HBI 10HBI 10HBI Disc operations Note Disable HighMAT disc play to use random and program play. In the SETUP menu, set “HighMAT” to “Disable” (A page 28) and perform the necessary operations (A above). To exit all group, program and random mode Press [PLAY MODE] several times while stopped.¡To select a 2-digit number Example: To select item 25, press [X10] A [2] A [5]. [2] A [5] A [ENTER] ¡Repeat this step to program other items. ¡ Step 1 is unnecessary when programming tracks on the same disc. ¡ To select an item using the cursor buttons Press [ENTER] and [ 8 88 8 8, 9 99 9 9] to select an item, then press [ENTER] again to register the number. All the items on the disc, title or group are selected when you select “ALL”. 3Press [:] (play). To add or change the program (Add only) Repeat steps 1 and 2. Press [8, 9] to select an available item, then repeat step 2. ¡Press [SHIFT]+[PAGE] to skip 8 lines at a time. To clear an item Press [CANCEL]. 1. Select the item you want to clear with [ 8 88 8 8, 9 99 9 9]. 2. Press [CANCEL], or select “Clear” with [ 8 88 8 8, 9 99 9 9, ; ; ; ; ;, : :: : :] and press [ENTER]. To clear the whole program Press [L] so “CLEAR” is displayed. Select “Clear all” with [ 8 88 8 8, 9 99 9 9, ; ; ; ; ;, : :: : :] and press [ENTER]. Note ¡ Times are not displayed while programming. ¡ Items the unit cannot find can be programmed but are canceled during play. This is also the case if you program DVD-RAM, DVD-Audio, DVD-Video, WMA, MP3 and JPEG. ¡The program is cleared when you switch the unit to standby, select another source, exit the program mode by pressing [PLAY MODE] or move the disc out of the play position. The program is retained in memory. Random play (There is no on-screen display.) 1-DISC (RND): You can play all items on a disc in random order. ALL-DISC (RND): You can play all items on all discs in random order. You can play selected item(s) on a disc in the play position in random order. 1 Press the numbered buttons to select a group ( then press [ENTER]) or a title. ¡You can select more than one group. ¡To enter all groups, select “All” using [;, :] and press [ENTER]. ¡To deselect a group, press the numbered buttons correspond- ing to the group you want to clear. 2Press [:] (play). Note ¡During random play, empty trays are skipped and the playback control function on Video CDs is canceled. ¡During random play, this unit can access up to 999 audio/picture contents. Playmode functions Common procedures for all group, program and random playWhile stopped Press [PLAY MODE]. Each time you press the button: All group ()→Program→Random→off (Normal play) (There is no on-screen display.) (PGM)→1-DISC(RND)→ALL-DISC (RND)→off (Normal play) If you select bonus groups, you will have to enter a password (A page 14). All group play The unit plays tracks from all the groups on a disc.Press [:] (play). Program play You can select up to 24 items to play in the order you choose. (There is no on-screen display.) You can program all the items on all discs. You can program all the items on a disc in the play position. Example 1Press [SHIFT] + disc button ([DISC 1]–[DISC 5]) to select disc. 2Press the numbered buttons to select the items ( then press [ENTER]). Example Subtitles (Motion picture parts only)(with multiple subtitles) (SVCD only) You can change the subtitle language and turn the subtitles on and off. You can turn the subtitles on and off. During play Press [SUBTITLE] several times to select the subtitle language. Example ¡In some cases, the subtitle language is not changed to the selectedone immediately. To clear/display the subtitles 1. Press [SUBTITLE]. 2. Press [;, :] to select “Off” or “On”. LChanging the position and brightness of the subtitles (A page 22) Program Play Play No. TitleChoose a title and chapter. Chapter Time 1 Clear Clear all to select and press ENTERPLAY to start Menu Subtitle On 1 English 2 French 3 Spanish PGM TRCK Disc No. Track No. Program No. PLAY to start0 ~ 9 to select Random Playback Choose a title. Title 1 Example RQT7534(2)PC(15) 10/2/04, 4:47 pm 15
RQT7534 16 Before Before Before Before Before Before Disc operations Zoom function (Motion picture parts only) Change the zoom ratio so the picture expands to the optimum size to fill the screen. Preparation Change the setting “TV Aspect” to suit your television ( A AA A A page 28). During play Press [SHIFT]+[ZOOM] to select the aspect ratio. Example Each time you press the button: Auto → 4:3 Standard → European Vista → 16:9 Standard Cinemascope2 ← Cinemascope1 ← American Vista ¡Refer to the disc’s instructions and “Screen size” below for the aspect ratio of the picture. To restore the original ratio Press [SHIFT]+[ZOOM] until the ratio returns to 1.00. ¡The ratio also returns to 1.00 when you change the disc, change the source or switch the unit to standby. ¡The ratio may return to 1.00 when a menu is displayed. Making fine adjustments (Manual Zoom) to the zoom ratio Press [;, :]. –From x1.00 to x1.60 (in 0.01 units). –From x1.60 to x2.00 (in 0.02 units). ¡Press and hold [;, :] to alter faster. LScreen size Movies are made using a variety of screen sizes. Discs—Convenient functions Marking places to play again (Only when the elapsed play time can be displayed) You can mark a position so you can return to it easily at a later time. 1During play Press [DISPLAY] (A page 21). 2Press [8, 9] to select “Other Settings” and press [ENTER]. 3Press [8, 9] to select “Play Menu” and press [ENTER]. Example 4Press [8, 9] to select “Marker” and press [ENTER]. 5Press [ENTER] at the point you want to mark. To mark another position Up to 5 points 1 Press [:] to select “¤”. 2 Press [ENTER] at the point. To recall or erase a marker 1 Press [;, :] to select a marker. 2 Press [ENTER] to recall or press [CANCEL] to erase. Note Markers added with this unit clear when you switch the unit to standby, change the source, or change the disc. →→ 89; :ENTER ZOOM DISPLAY CANCEL SHIFT Menu Just Fit Zoom x1.00 Auto 4:3 Standard European Vista 16:9 Standard American Vista Cinemascope1 Cinemascope2 Menu Repeat Off A-B Repeat Marker Marker RQT7534(2)PC(16-17)10/2/04, 4:48 pm 16
17 RQT7534 10HBI 10HBI 10HBI 10HBI Disc operations Using the play list menu (Only when the disc contains a play list) You can play a group of scenes, a play list, created on other equipment such as a DVD video recorder. 1Press [PLAY LIST]. 2Press [8, 9] to select the play list. ¡Press [SHIFT]+[PAGE] to skip 10 lines at a time. ¡You can select play lists with the numbered buttons. To select a 2-digit number Example 23: [X10] A [2] A [3] 3Press [ENTER] to start play. To clear the play list screen Press [PLAY LIST]. Selecting a program to play — DIRECT NAVIGATOR Use the program list to find programs to play. 1Press [DIRECT NAVIGATOR]. 2Press [8, 9] to select the program. The selected program plays in the background. ¡Press [SHIFT]+[PAGE] to skip 5 lines at a time. ¡You can select programs with the numbered buttons. To select a 2-digit number Example 23: [X10] A [2] A [3] ¡Press [:] to show the contents of the program and disc. 3Press [ENTER]. The program being played in the background continues. To clear the program list Press [DIRECT NAVIGATOR]. Note ¡Titles appear only if you have entered them. ¡You cannot change program and disc titles. Playing the programs or play lists on DVD-RAM 89; :ENTERNumbered buttons PLAY LIST DIRECT NAVIGATOR PAG E SHIFT 1 11/ 1(WED) 12:05 AM Monday feature2 1/ 1(MON) 1:05 AM Auto action3 2/ 2(TUE) 2:21 AM Cinema4 3/ 3(WED) 3:37 AM Music5 4/ 10(THU) 11:05 AM Baseball No. Date On Title ContentsRETURN to exit0 ~ 9 to select and press ENTER 1 11/ 1 0:00:01 Clay Penguin2 1/ 1 0:01:20 Ashley at Prom3 2/ 2 1:10:04 Formula One4 3/ 3 0:10:20 Soceer5 4/ 10 0:00:01 Baseball No. Date Length Title RETURN to exit0 ~ 9 to select and press ENTER Playlist RQT7534(2)PC(16-17)10/2/04, 4:48 pm 17
RQT7534 18 Before Before Before Before Before Before Disc operations Using the submenu 1While the menu is displayed, press [DISPLAY]. 2Press [8, 9] to select the submenu and press [ENTER]. Content or group title search Example: finding a content including the word “LOVE” 1While the menu is displayed, place the cursor on the group title to search a group, or place the cursor on the content title to search contents. Press [DISPLAY]. 2Press [8, 9] to select “Find” and press [ENTER]. 3Press [8, 9] to select “L” and press [ENTER]. Characters change in alphanumeric order each time you press [8]. Repeat this step to enter “O”, “V”, and “E”. ¡Press [(, )] to skip between A, E, I, O, and U. ¡Only upper case letters appear but the search also includes lower case letters. ¡Press [ ; ;; ; ;] to erase a character. ¡You can erase the asterisk (¤) to search for the first word in a title. ¡You can enter numbers with the numbered buttons. 4Press [:] to select “Find” and press [ENTER]. The search results screen appears. 5Press [8, 9] to select the content and press [ENTER]. If the disc contains both audio data (WMA and MP3) and JPEG, press [TOP MENU] to select “All” (JPEG/WMA/MP3), “Audio” (WMA/MP3) or “Picture” (JPEG) in the Playback Menu. (CD text only) Various menus help you find items you want to start play. 1Press [MENU]. 2Press [8, 9, ;, :] to select a content and press [ENTER]. ¡After listing all the contents in one group, the list for the next group appears. Example: Navigation menu WMA/MP3, JPEG and CD text navigation menus 89; :ENTER L( ) MENU RETURN DISPLAY PAG E SHIFT TOP MENU Navigation Menu 2 5 MP3 1:54 CANCEL to cancelGroup 002/003 Content 0005/0010 G GC C Sep 15 2003 Lirkin Park — Meteora Penguins Breaking The Habit Dont_Stay Faint Hit_The_Floor_—_Abyss Lirkin Park [Hyorid Theor Lirkin Park_Cure For The Lirkin_Park_—_Metora_ Lirkin_Park_—_Metora_ Lying_From_You Somewhere_I_Belong Lady Starfish Life on Jupiter Multi List Tree Next group Previous group Kirkin Hybirid AFind 0 ~ 9 to input and press ENTER Groups and contents Contents only Groups only To go to next groups To go to previous groups JPEG files only WMA/MP3 and JPEG files To switch between guide messages and the elapsed play time indicator To search by content or group title WMA/MP3 files onlyMulti List Tree Thumbnail Next group Previous group All Audio Picture Help display Find Thumbnail images To exit Press [RETURN]. Navigation Menu 2 5 MP3 1:54 DISPLAY to display the sub menuRETURN to exitGroup 002/003 Content 0005/0012 G GC C Breaking The Habit Dont_Stay Faint Hit_The_Floor_—_Abyss Lirkin Park [Hyorid Theor Lirkin Park_Cure For The Lirkin_Park_—_Metora_ Lirkin_Park_—_Metora_ Lying_From_You Somewhere_I_Belong Lady Starfish Life on Jupiter Sep 15 2003 Lirkin Park — Meteora Penguins: WMA/MP3 files ;: indicates the group/content currently playing : JPEG files Group and content number currently playing Group Audio/picture contentsNumber currently selected RQT7534(2)PC(18-20)10/2/04, 4:48 pm 18
19 RQT7534 10HBI 10HBI 10HBI 10HBI Disc operations To use the tree screen to find a group 1While the menu is displayed Press [DISPLAY]. 2Press [8, 9] to select “Tree” and press [ENTER]. Example 3Press [8, 9] to select a group and press [ENTER]. To use the contents screen to find a track (CD text only) You can use the text information recorded on these discs to find a track to play. 1Press [TOP MENU] or [MENU] to display the content screen. 2Press [8, 9] to move through the tracks and press [ENTER]. ¡Press [SHIFT]+[PAGE] to skip 10 lines at a time. See page 31 for details about WMA, MP3, JPEG and CD text . Navigation Menu 2 5 MP3 1:54 DISPLAY to display the sub menuRETURN to exitGroup 002/007 Content 0005/0010 G GC C Sep 15 2003 Lirkin Park — Meteora Penguins Celine Dion Jazz Savage Garden Ashley Playing HighMAT discs A menu appears when you select the disc. Press [8, 9, ;, :] to select then press [ENTER]. When you press [ENTER]: ¡To display the screen Press [TOP MENU]. ¡To return to the menu above the current one Press [RETURN]. ¡To change the menu background Press [DISPLAY]. The background changes to the one recorded on the disc. ¡To exit the screen Press [L]. Selecting from the lists 1During play Press [MENU]. 2Press [;] then [8, 9] to switch between the playlist, group and content lists. 3Press [:] then [8, 9] to select an item and press [ENTER]. ¡Press [SHIFT]+[PAGE] to skip 10 lines at a time.Menu: Takes you to the next menu which shows play lists or another menu Play list: play starts HighMAT and the HighMAT logo are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. CD-Text 1/14 0:53 Disc Title : Celine Dion One Heart Disc Artist : Celine Dion Track Title : I Drove All Night (Album Version) Track Artist : to select and press ENTER 1. I Drove All Night (Album Version)2. Love Is All We Need (Album Version)3. FAITH (Album Version)4. In His Touch (Album Version)5. One Heart (Album Version)6. Stand By Your side (Album Version)7. NAKED (Album Version)8. Sorry For Love (Album Version)9. Have You Ever Been In Love (Album Version)10. Reveal (Album Version) T T RETURN to exit To exit Press [RETURN]. No. Content title RETURN to exit0 ~ 9 to select ENTER to play 1 Few times in summer2 Less and less3 And when i was born4 Quatre gymnopedies5 You’ve made me sad6 I can’t quit him7 Evening glory8 Wheeling spin9 Velvet Cuppermine10 Ziggy Starfish PlaylistGroupContent Playlist Playlist Group 1 Playing RQT7534(2)PC(18-20)10/2/04, 4:48 pm 19
RQT7534 20 Before Before Before Before Before Before Disc operations Using On-Screen Menus Progress indicator Indicates how far you have played through an item. Example 1Condition–play, pause, or slow/search Play speed (A below) 2Current position 3P: Program number /Playlist number T: Title number G: Group number 4T: Track number C: Chapter number / Content number 5Changing the time display Press [8, 9] to show the elapsed play time or remaining time. Elapsed play time (SVCD only) (display only, cannot be changed) Changing play speed (Motion picture parts only) (Dolby Digital and DTS) You can slow down or speed up play. 1During play Press [DISPLAY]. 2Press [8, 9] to select “Other Settings” and press [ENTER]. 3Press [8, 9] to select “Play Speed” and press [ENTER]. There are nine speeds: Example 4Press [8, 9] to select the desired speed and press [ENTER]. After you change the speed, output is in stereo. To return to normal play (surround sound), press [:] (play) or select “Normal”. Normal play is also restored when you return the speed to “Normal”. On-Screen Menus are menus that contain information about the disc or unit. These menus allow you to perform operations by changing this information. Common procedures 1 Press [DISPLAY]. Main menu only 2Press [8, 9] to select the item and press [ENTER]. 3Press [8, 9] to select the setting and press [ENTER]. ¡Some items require different operations. Read the explanationson the following pages. For your reference ¡Depending on the condition of the unit (playing, stopped, etc.) and the type of software you are playing, there are some items that you cannot select or change. ¡When numbers are displayed (e.g. title No.), the numbered buttons can also be used for setting. After entering the numbers, press [ENTER] to register the setting. To clear the menus Press [RETURN] until the menus disappear. 89; :ENTERNumbered buttons : RETURN DISPLAY 2 3 0:31:53 T T C C 21 3 4 5 Each time you press the button: Main menu (A page 21) Progress indicator (A right) Original displayx1.4 x1.3 x1.2 x1.1 Normal x0.9 x0.8 x0.7 x0.6 Menu Title 30/34 Chapter 1/11 Time 0:00:12 Audio 1 English Subtitle _ _ _ _ Angle 1/1 Other Settings Play Speed Play Menu Picture Menu Audio Menu Display Menu RQT7534(2)PC(18-20)10/2/04, 4:48 pm 20