Panasonic DP 3030 User Manual

							
51
Making Copies
Density for 1st page imageNumber of Copies
(Max. 999)
or
Select the overlay image to store
into memory for later use.or
Density for
registered
image
REGISTER
or
File Name
ERASE
FILE NAME EDIT
Enter the file name
Select a fileNumber of Copies
(Max. 999)
From Platen:
If “Another Original? message is
displayed, touch the “NO” button.
Ex: 2 originals
To uch NO button.
Place the next original on the
Platen.
3Press Start Key.
4Touch YES button.
To
 cancel the registration,
touch CANCEL button.
From Platen:
Same procedures
as for Form Overlay
345
45
4
67
45
34
Downloaded From ManualsPrinter.com Manuals 
						

							
52
Making Copies
Other Features
■ Job Memory
Five Copy Jobs can be stored in Memory
(M1 to M5) for recall at a later time.To  store a job in memory
M1, M2, M3, M4, M5
Set up the copy job
to be stored.
12
NOTE●
JOB MEMORY mode will not be deleted even if the power switches are turned Off.
● When storing a new job into a programmed memory location, the previously\
 stored job will be
overwritten and erased.
● M1, M2 can use as manual skyshot mode by setting the user function mode.\
■ Double Exposure
From 2-Sided originals to 1-Sided 2 in 1
copies (side-by-side image).  ∗1
•
Front Side of Original
• Original Size:
Free, maximum Invoice size
• Opening the ADF
• Fit original to the Original
Guide.
Back Side
of Original
NOTE:
When opening the Platen Cover or optional ADF/i-ADF
● An incorrect position detection of the original may
occur when a strong light shines on the glass during
this mode.
● An incorrect exposure may occur when there is a
black line at the edge of the original or an image
which the machine interprets as a black pattern in
this mode.
● The final copy may be affected if colored background
original(s) do not have a white edge or if it is less
than 2 mm wide.
Original Size:
Maximum Invoice
Copy Size: Letter-R
ex. Invoice NOTE:
A
B
CA
B
C D
E
F
Front Side
Image
Back Side
Image
12
56
NOTE:
When the M5 Key is used, the Double
Exposure Mode should be set to Off
in the Copier Settings 16 Double
Exposure. (See page 59)
Original Guide
∗
2
∗1When selecting the Double Exposure,  it will be
displayed as  2 in 1 at  Job Settings, and N in 1
of Function Select Key will also be displayed.
∗2Double Exposure function set by M5 key is unable
to store with other Job Memory.
Downloaded From ManualsPrinter.com Manuals 
						

							
53
Making Copies
To recall a job stored in memory
M1, M2, M3, M4, M5
or
Number of Copies
(Max. 999)
123
Number of Copies
(Max. 999)
34
NOTE
If “2: NO” is selected,
the machine will start
copying only scanned
original.
5
7The following steps, illustrate how to
make multiple copies when the Sort
Mode is selected. (See page 40)
1: YES Continues to copy another
original, repeat steps 1
and 3-
 2  to step 6.
2: NO Starts making copies.
NOTE● When using the double exposure mode, the M5 is turned On and other job r\
equiring memory
cannot be used.
● The default setting of Double Exposure Mode is ON in the Copier Settin\
gs 16 Double
Exposure. If this setting is changed to “OFF”, this mode cannot b\
e used.
Downloaded From ManualsPrinter.com Manuals 
						

							
54
Making Copies
Other Features
■ Concurrent Copying
The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional Hard Disk Drive and Image
Memory (See page 71) to be installed)
1st job1st job
2nd job
Reserve
Copy
2nd job
1st job
orSelect Function
■ Energy Saver (Power Save Mode, Sleep/Shutdown Mode)
■ Skyshot Mode
Skyshot allows copying a manuscript without generating dark borders even\
 if the platen cover or ADF is opened.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) i\
n advance.
Digital Skyshot Mode
NORMAL
Default setting (usually select this mode).
QUALITY ∗∗
∗∗ ∗∗
∗∗
∗∗
For better definition, select the Quality mode.
The default setting of Digital Skyshot Mode is
“NORMAL”. In this setting, the unit scans once.
If there are black areas around the borders in
the copies, set the Digital Skyshot Mode to
“QUALITY” to soften the dark borders. In this
setting, the unit scans twice.
(See page 58)
Opening the ADF
Number of Copies
(Max. 999)
NOTE∗Sleep Mode/Shutdown Mode and entering timer can be selected by the key o\
perator.
(See page 61)
∗∗When copying the Quality mode combined with 1  2, BOOK  2, 2PAGE, N in 1,  or
Double Exposure, “Quality” mode will be changed to “Normal” \
mode.
● An incorrect exposure may occur when there is a black line at the edge o\
f the original or an
image which the copier interprets as a black pattern in the skyshot mode\
.
These modes save power while the copier is not in use.
Power Save Mode
Enter
Sleep/Shutdown Mode
∗
∗ ∗
∗
∗
Automatically enters the Sleep/
Shutdown Mode after 15 minutes
from the last copy job.
To  clear
or
Modes Power Consumption Warm Up Time
Normal Operation Approx. 140 Wh N/A
Power Save Approx. 28 Wh Approx. 30 sec.
Sleep Approx. 18 Wh 35 sec.
Shutdown Approx. 3 Wh 35 sec.
1
2
12
21
The machine will not go into Sleep/Shutdown Mode when the Weekly
Timer is selected.
Indicator
Flash: Power Save Mode
Light: Sleep/Shutdown Mode
Downloaded From ManualsPrinter.com Manuals 
						

							
55
Making Copies
Scanning is completed
or
Select
Function
Job Waiting List can be
confirmed with Job Queue.
(See page 32)
■ Interrupt Mode
This mode can interrupt other copy jobs while making copies.
or
Other Job set
Other Job is
completed
Number of Copies
(Max. 999)
∗Default M1/M2 size can be changed
by Function mode. (See page 64)
Manual Skyshot Mode
● Set “09 Manual Skyshot Mode” in Copier Settings first. (See page \
58)
Platen
Upper-
Left
Corner
Custom size ∗
NOTE●
If using ADF, place originals in the center position of ADF Tray. The ADF can feed only 14 - 28
lb plain paper.
● When using the manual skyshot mode, the M1 and M2 are turned On and othe\
r job requiring
memory cannot be used.
● An incorrect position detection of the original may occur when a strong \
light shines onto the
glass during skyshot mode.
3456
12345
123
Downloaded From ManualsPrinter.com Manuals 
						

							
56
Function
■ Using Function Modes to Change the Initial Modes
General
Settings
General
Settings for
Key Operator Copier
Settings
Copier
Settings for
Key Operator Printer
Settings
Printer
Settings for
Key Operator Fax/Email
Settings
Fax/Email
Settings for
Key Operator Scanner
Settings
Input Identification (Key Operator ID) Code Options
General Settings:Changing the Initial Machine Modes
●
Power On Default mode, Manually add toner, etc.
(See page 58)
For Key Operator:
Paper size, Finisher bin/Staple mode, Department
Counter, Network TCP/IP settings, etc.
(See pages 61, 62 and 63)
■ Procedure
Select the desired Function Mode Select the desired Function
Identification
Code (4-digit)
NOTE● Please refer to the appropriate operating instructions manual for functi\
on settings on options.
123
When selecting the Key
Operator Mode:
4
Downloaded From ManualsPrinter.com Manuals 
						

							
57
Function
Copier Settings:Changing the Initial Copy Modes
●Default function of each copy mode
(See pages 58 and 59)
For Key Operator:
Paper size priority, Original mode, Contrast, Job Build
and SADF mode, Original size of Manual Skyshot
mode, etc.
(See page 64)
Printer Settings:Changing the Initial Printer Modes
●Default function of each print mode
(See page 60)
For Key Operator:
Job completion time, Page protection, Error page print,
Spool function, PS configuration, Font list print, Mailbox
data holding, etc.
(See page 65)

Scanner Settings:
Changing the Initial Scanner Modes
●Original mode, Compression mode, Resolution, Job
Build and SADF mode, Address book, etc.
(See page 59)
● The Completion Notice will work for other modes (i.e.
Copy, etc.) even if the Scanner Option not installed.
Fax/Email Settings:Changing the Initial Fax/Email Modes
Refer to Operating Instructions (For Fax/Internet Fax
function).
Set the desired Function
4
5
6
Set the desired Function
Parameter(s).
Set the desired Function
Parameter(s).
5
Downloaded From ManualsPrinter.com Manuals 
						

							
58
Function
■ General Settings
Screen
No.
00 Power On Default Mode Selects mode. Copy
●COPY, FAX, PRINTER, SCANNER
01 Manual Copy Quality Adj Sets to activate the manual density control. Off
● Off, On
02 Manual Add Toner Adds toner manually. Off
● Off, On
03 Sort Memory Status Indicates the sorting memory status. Off
● Off, On
04 Departmental Counter Indicates the department counter.
Consult with an
authorized service
provider
09 Key Operator Mode Input the Key Operator ID Code.
Modes Function Initial
Setting
01/02
02/02
■  Copier Settings
Screen
No.
00 Margin Value Default Selects the margin shift value. 10 mm
●5 mm, 10 mm, 15 mm, 20 mm
01 Edge Value Default Selects the edge width. 5 mm
● 5 mm, 10 mm, 15 mm, 20 mm
02 Book Value Default Selects the book void width. 20 mm
● 15 mm, 20 mm, 25 mm, 30 mm
03 Margin Reduction Def. Selects the reduction ratio in margin mode. No
● No, Yes
04 2-Sided Mode Default Function sets the duplex priority mode. No
● No, 1 to 2, 2 to 2, B (Book) to 2
05  N in 1 Default Mode Selects the N in 1 default mode 2 in 1
● 2 in 1, 4 in 1, 6 in 1
06 Reduce N in 1 For Space Selects whether to disable edge deletion No
● No, Yes
07  Booklet Default Mag. Selects the booklet magnification Reduce
● 100%, Reduce
08 Digital Skyshot Mode Enables or disables the use of Skyshot mode. Normal
● No, Normal, Quality
09 Manual Skyshot Mode Enables or disables the use of Manual Skyshot. Off
● Off, M1,On, M2,On, M1,M2,On
Modes Function
Initial
Setting
01/04
02/04
∗When the optional Network Scaner Module/Fax
Communication Board is installed.
Downloaded From ManualsPrinter.com Manuals 
						

							
59
Function
03/04
04/04
■ Copier Settings
Screen
No.
10 Auto Contrast Adjust. Automatically adjusts the copy density for text, Yes T/P.
●No, Yes
11  Sort Priority ADF Selects the sort mode. Sort
●None (Non-Sort), Sort, Shift ∗
, Staple ∗
, Group ∗
12 Sort Priority Glass Selects the sort mode. None
●None (Non-Sort), Sort, Shift ∗
, Staple ∗
, Group ∗
13 Stamping Default Mode Selects the stamping mode. Page
●
Page, Date, Issue
14 Page Numbering Style Selects the page numbering style. -n-
● -n-, n/m
15 Imag. Repeat Dotted Line Selects the dotted line. Print
● None, Print
16 Double Exposure Selects the double exposure. On
● Off, On
19 Key Operator Mode Input Key Operator ID Code. Modes Function
Initial
Setting
■  Scanner Settings
Screen
No.
00 Scanner Settings Print To print scanner settings. Start
●Stop, Start
01 Original Mode Default Sets the original setting. T/P
● Text, T/P (Text/Photo), Photo
02 Compression Mode Def. Sets the compression mode setting. JBIG
● MH, MR, MMR, JBIG
03 Resolution Default Sets the resolution setting. 600 dpi
● 150 dpi, 300 dpi, 600 dpi
04 Job Build and SADF Mode Sets the Job Build and SADF mode initial No setting.
●No, Yes
05 Bind Edge 2-Side Orig. Sets the bind position, 2-sided original initial Long setting.
●Long, Short
06 Add New Address To add new address.
∗0.0.0.0
● PC, DD, FTP
07 Edit Address Book To edit address book.∗
08 Delete Address To delete address.∗
09 XMT File Type Sets the default XMF File Type. PDF
●TIFF, PDF
Modes Function
Initial
Setting
01/02
02/02
∗Shift, Staple and Group modes are available when
the optional 1-Bin Finisher is installed and the
Outer is selected with the touch panel display.
NOTE∗Address Book is not necessary to set in this function setting, your PC c\
an be registered with
Panasonic-DMS. (See page 72)
Downloaded From ManualsPrinter.com Manuals 
						

							
60
Function
■ Printer Settings
Screen
No.
00 Number of Prints Sets the initial number of prints. 1
●1 ~ 999
01 Paper Size Sets the paper size setting. LETTER ●A3, B4, A4, B5, A5, LEDGER, LEGAL,
LETTER, INVOICE, 8 x 13, 8.5 x 13
02 Paper Tray Sets the Paper Tray setting. Auto
● Auto, Bypass, Tray 1, Tray 2, Tray 3, Tray 4
03 Print Direction Sets the print direction setting. Portrait
● Portrait, Landscap
04 Auto Tray Selection Sets the auto tray setting. On
● Off, On
05 2-Sided Print Sets the 2-sided print setting. Off
● Off, On
06 Bind Edge Sets the bind position. Long
● Long, Short
07 Resolution Sets the resolution setting. 600 x 600
● 1200 x 600, 600 x 600, 300 x 300
08 Font (PCL) ∗
Sets the PCL font. 0
●0 ~ 99
09 Symbol Table (PCL) ∗
Sets PCL symbol table. 11
●0 ~ 35
10 Pitch (PCL) ∗
Sets the PCL pitch. 10.00
●0.44 - 99.99
11  Point Size (PCL) ∗
Sets PCL point size. 012.00
●4.00 - 999.75
12 Lines/Page (PCL) ∗
Sets PCL lines/page. 60
●5 - 123
13 Return Character (PCL) ∗
Sets PCL return character. CR
●CR, CR + LF
14 Mutual A4/LTR Converts A4 to Letter automatically. Off
● Off, On
15 Mailbox Memory Status ∗∗
Indicates the mailbox memory status.
●Memory, Box
16 Print Data Sets print data. Start
● Stop, Start
19 Key Operator Mode Input the Key Operator ID Code.
Modes Function Initial
Setting
01/04
02/04
03/04
04/04
NOTE∗When available with optional PCL.
∗∗When available with optional Hard Disk Drive (DA-HD30) is installed.
Downloaded From ManualsPrinter.com Manuals