Panasonic DP 3030 User Manual

51
Making Copies
Density for 1st page imageNumber of Copies
(Max. 999)
or
Select the overlay image to store
into memory for later use.or
Density for
registered
image
REGISTER
or
File Name
ERASE
FILE NAME EDIT
Enter the file name
Select a fileNumber of Copies
(Max. 999)
From Platen:
If “Another Original? message is
displayed, touch the “NO” button.
Ex: 2 originals
To uch NO button.
Place the next original on the
Platen.
3Press Start Key.
4Touch YES button.
To
 cancel the registration,
touch CANCEL...

52
Making Copies
Other Features
■ Job Memory
Five Copy Jobs can be stored in Memory
(M1 to M5) for recall at a later time.To  store a job in memory
M1, M2, M3, M4, M5
Set up the copy job
to be stored.
12
NOTE●
JOB MEMORY mode will not be deleted even if the power switches are turned Off.
● When storing a new job into a programmed memory location, the previously\
 stored job will be
overwritten and erased.
● M1, M2 can use as manual skyshot mode by setting the user function mode.\
■ Double Exposure
From...

53
Making Copies
To recall a job stored in memory
M1, M2, M3, M4, M5
or
Number of Copies
(Max. 999)
123
Number of Copies
(Max. 999)
34
NOTE
If “2: NO” is selected,
the machine will start
copying only scanned
original.
5
7The following steps, illustrate how to
make multiple copies when the Sort
Mode is selected. (See page 40)
1: YES Continues to copy another
original, repeat steps 1
and 3-
 2  to step 6.
2: NO Starts making copies.
NOTE● When using the double exposure mode, the M5 is turned On and other...

54
Making Copies
Other Features
■ Concurrent Copying
The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional Hard Disk Drive and Image
Memory (See page 71) to be installed)
1st job1st job
2nd job
Reserve
Copy
2nd job
1st job
orSelect Function
■ Energy Saver (Power Save Mode, Sleep/Shutdown Mode)
■ Skyshot Mode
Skyshot allows copying a manuscript without generating dark borders even\
 if the platen cover or ADF is opened.
Two types of Skyshot modes can be...

55
Making Copies
Scanning is completed
or
Select
Function
Job Waiting List can be
confirmed with Job Queue.
(See page 32)
■ Interrupt Mode
This mode can interrupt other copy jobs while making copies.
or
Other Job set
Other Job is
completed
Number of Copies
(Max. 999)
∗Default M1/M2 size can be changed
by Function mode. (See page 64)
Manual Skyshot Mode
● Set “09 Manual Skyshot Mode” in Copier Settings first. (See page \
58)
Platen
Upper-
Left
Corner
Custom size ∗
NOTE●
If using ADF, place originals in...

56
Function
■ Using Function Modes to Change the Initial Modes
General
Settings
General
Settings for
Key Operator Copier
Settings
Copier
Settings for
Key Operator Printer
Settings
Printer
Settings for
Key Operator Fax/Email
Settings
Fax/Email
Settings for
Key Operator Scanner
Settings
Input Identification (Key Operator ID) Code Options
General Settings:Changing the Initial Machine Modes
●
Power On Default mode, Manually add toner, etc.
(See page 58)
For Key Operator:
Paper size, Finisher bin/Staple...

57
Function
Copier Settings:Changing the Initial Copy Modes
●Default function of each copy mode
(See pages 58 and 59)
For Key Operator:
Paper size priority, Original mode, Contrast, Job Build
and SADF mode, Original size of Manual Skyshot
mode, etc.
(See page 64)
Printer Settings:Changing the Initial Printer Modes
●Default function of each print mode
(See page 60)
For Key Operator:
Job completion time, Page protection, Error page print,
Spool function, PS configuration, Font list print, Mailbox
data...

58
Function
■ General Settings
Screen
No.
00 Power On Default Mode Selects mode. Copy
●COPY, FAX, PRINTER, SCANNER
01 Manual Copy Quality Adj Sets to activate the manual density control. Off
● Off, On
02 Manual Add Toner Adds toner manually. Off
● Off, On
03 Sort Memory Status Indicates the sorting memory status. Off
● Off, On
04 Departmental Counter Indicates the department counter.
Consult with an
authorized service
provider
09 Key Operator Mode Input the Key Operator ID Code.
Modes Function Initial...

59
Function
03/04
04/04
■ Copier Settings
Screen
No.
10 Auto Contrast Adjust. Automatically adjusts the copy density for text, Yes T/P.
●No, Yes
11  Sort Priority ADF Selects the sort mode. Sort
●None (Non-Sort), Sort, Shift ∗
, Staple ∗
, Group ∗
12 Sort Priority Glass Selects the sort mode. None
●None (Non-Sort), Sort, Shift ∗
, Staple ∗
, Group ∗
13 Stamping Default Mode Selects the stamping mode. Page
●
Page, Date, Issue
14 Page Numbering Style Selects the page numbering style. -n-
● -n-, n/m
15...

60
Function
■ Printer Settings
Screen
No.
00 Number of Prints Sets the initial number of prints. 1
●1 ~ 999
01 Paper Size Sets the paper size setting. LETTER ●A3, B4, A4, B5, A5, LEDGER, LEGAL,
LETTER, INVOICE, 8 x 13, 8.5 x 13
02 Paper Tray Sets the Paper Tray setting. Auto
● Auto, Bypass, Tray 1, Tray 2, Tray 3, Tray 4
03 Print Direction Sets the print direction setting. Portrait
● Portrait, Landscap
04 Auto Tray Selection Sets the auto tray setting. On
● Off, On
05 2-Sided Print Sets the 2-sided...