Panasonic DP 1515P User Manual

							21
Function
07 DIGITAL SKYSHOT Selects the default digital skyshot mode. 2:NORMAL
1:OFF / 2:NORMAL / 3:QUALITY
09 AUTO EXPOSURE Selects whether the auto exposure is enabled. 2:VALID
1:INVALID / 2:VALID
10 SORT PRIORITY ADF Selects the sort priority when using the ADF. 2:SORT
1:NON-SORT / 2:SORT
11SORT PRIOR. GLASS Selects the sort priority when using the Platen. 1:NON-SORT
1:NON-SORT / 2:SORT
19 KEY OPERATOR MODE Inputs the key operator password.
ENTER PASSWORD = 
■ Copier Settings
No.
Modes FunctionInitial
Setting
00 COPY SETTING LIST Prints the copier settings list.
PRESS START
01 ORIGINAL (HOME) Selects the halftone default setting. 2:TEXT/PHOTO
1:TEXT / 2:TEXT/PHOTO / 3:PHOTO
02 TEXT CONTRAST
Selects the default contrast setting for the Text mode.3
1-5
03 T/P CONTRAST
Selects the default contrast setting for the Text/Photo3
mode.
1-5
04 PHOTO CONTRAST
Selects the default contrast setting for the Photo mode.3
1-5
05 MAX. COPY SETTING
Select the maximum number of copies allowed per job.999
1-999
08 MEM. FULL  ACTION
Selects the action to take during memory full condition.1:PRINT
1:PRINT / 2:CANCEL
09 TONER SAVE (TEXT)
Selects the Toner Save Level to use for the Text mode.1:NONE
1:NONE / 2:LEVEL1 / 3:LEVEL2
10 TONER SAVE (T/P) Selects the Toner Save Level to use for the 1:NONE
Text/Photo mode.
1:NONE / 2:LEVEL1 / 3:LEVEL2
11TONER SAVE (PHOTO) Selects the Toner Save Level to use for the 1:NONE
Photo mode.
1:NONE / 2:LEVEL1 / 3:LEVEL2
12 SADF DEFAULT Selects whether the Job Build and SADF Mode 1:OFF
is enabled.
1:OFF / 2:ON
The following Parameter Settings require the input of the Key Operator Password:
■ Copier Settings (For Key Operator)
No.
Modes FunctionInitial
Setting
Downloaded From ManualsPrinter.com Manuals 
						

							Function
22
For Example
■Changing the Paper Size (Paper Tray)
The Paper Trays are designed to accommodate A5, A4, B4 and A3 Size paper.
1
Press the FUNCTION key.
FUNCTION key
2
Select  1: GENERAL SETTINGS.
6
Press START key.
7
Select a Paper Size with  /
 key.
Enter 1 with keypad.
Press START key.
FUNCTION MODE (1-2)
ENTER NO. OR ∨ 
^
3
Enter 9 with keypad to select
09  KEY OPERATOR MODE.
GENERAL PARAM. (0-9)
ENTER NO. OR ∨ 
^
4
Enter key operator password
(3-digit) with key pad.
09 KEY OPERATOR MODE
ENTER PASSWORD=_
●The default key operator password is 000.
If it is changed, consult your key operator.
5
Enter 01 with keypad to select
01 PAPER SIZE.
KEY OPR.MODE  (00-12)
ENTER NO. OR ∨ 
^
01 PAPER SIZE
 1:TRAY-1[A4      ]
8
Press the START key.
9
Press the STOP key.
STOP key
START key
TRAY-1
A4            
^ ∨
 LETTER
 INVOICE  LETTER
 B5
 A5
 A4
 B5  A4
 A3
 B4
 LEDGER
 LEGAL
 FLS1
 FLS2  A5
Downloaded From ManualsPrinter.com Manuals 
						

							23
Function
●It is recommended that the paper guide B is fixed in place with a screw, consult your authorized service provider for
details on how to fasten the guide.
10
Pull out the Paper Tray.
11
Adjust the Paper Guide B to the
paper width.
12
Adjust the Paper Guide A to the
paper length.
13
Reinstall the Paper Tray.
Paper Tray
Paper Guide B
Paper Guide A
Paper Tray
Downloaded From ManualsPrinter.com Manuals 
						

							Problem Solving
24
CheckAction
Unit Does Not Operate
Check if the Power Switch (Main Power Switch
on the Right Side of the machine) is turned ON
and if the power cord is plugged into the AC
outlet. Does the display light?
Press Energy Saver key on the control panel. Does the Energy Saver key flash (or light)
and the display is turned OFF?
(See page 18)
Perform actions in accordance with each
message. Does any of the U## codes and messages
appear on the display?
(U01, U07, U13, U14....etc.)
Add paper. (See pages 26-27) Does the Add Paper indicator and message
appear on the display?
Remove the misfed paper. (See pages 30-32) Does the Misfed Paper indicator, message
and J## codes appear on the display?
Turn the Power Switch on the Right Side of the
machine to the OFF and ON position. If the
error code does not clear, call your Service
provider. Does E#-## codes and messages appear on
the display?
Turn the Power Switch on the Right Side of the
machine to the OFF and ON position. The machine would not accept the next job
during operation, instructed job would not be
accepted for a long time period or job would
not be completed.
Light Copies
Press the CONTRAST key to adjust the
scanning contrast. (See page 10) Does the scanning contrast indicator say

 or   (Lighter)?
Replace the Toner Bottle.
(See pages 28-29) Does the Add Toner indicator and message
appear on the display?
Troubleshooting
Downloaded From ManualsPrinter.com Manuals 
						

							25
Problem Solving
Code Check Points
J70, Remove misfed Paper.
J71, (See page 32)
J79,
J92,
J93,
CheckAction
Marked Copies
Clean the Platen Glass or Sheet. Is the machine’s Platen Glass or Platen Sheet
dirty?
Cover the original with a sheet of white paper
before copying or lighten the exposure setting. Is the original an OHP film or a dark original?
Clean the Corona Wire of the Drum Unit.
(See page 28)
Check the copies.
If a dark vertical line is remained, repeat
above step to clean the Corona Wire
became dark vertical line is erased. If a dark vertical line of
2-3 cm in width is printed.
■ If the measures outlined above do not solve the problem, call your Service provider.
Code Check Points
U20 ADF Cover is open.
U21 ADF is opened while scanning from ADF.
U25 Toner hardened inside the Toner Bottle.
Remove the Toner Bottle and shake it well.
Code Check Points
U01 Front and/or Left Cover is open.
U13 Low Toner or Out of Toner.
U14 Toner Waste Container is full.
U15 Toner Waste Container is incorrectly installed.
U16 Developer Unit is incorrectly installed.
Call your Service Provider.
■ User Error Codes (U Code)
■ Jam Error Codes (J Code)
Code Check Points
J00
Remove paper from the Sheet Bypass.
Open and close the Left Cover.
(See page 30)
J01 Pull the paper tray out and remove jammed
paper from the standard paper tray (Tray-1)
(See page 31)
J30, Remove misfed Paper.
J31, (See page 31)
J33,
∗J95: Check the paper size of the paper tray.
J45, (See page 22)
J46,
J48,
J95∗
NOTE:●The J## Code indicates the most probable Jam location. If the jam message reappears after the jam is cleared,
paper is most likely jammed at other location(s). Check the Jam Error Codes Table above for other check
points and remove all misfed paper.
Downloaded From ManualsPrinter.com Manuals 
						

							Problem Solving
26
Maintenance
■ Adding Paper
●Paper Tray
1
Pull out the Paper Tray.
2
Load paper.
Paper TrayPaper Tray
3
Reinstall the Paper Tray.
NOTE
●When changing the paper size, refer to page 22.
Max Level
Indicator
Face Up
Paper Weight: 60 - 90 g/m2
Paper Capacity: 550 Sheets (80 g/m2)
●Make sure that the paper is set properly
and that it does not exceed the Max.
Level indicator.
Downloaded From ManualsPrinter.com Manuals 
						

							27
Problem Solving
●Sheet Bypass
Copying on Special Paper, etc.
1
Open the Sheet Bypass.
2
Pull the Sheet Bypass.
4
Load paper.
(Do not exceed limit guides)
3
Adjust the Width Guides.
●Incorrect adjustment may cause the paper
to wrinkle, misfed or skew.Paper Weight: 55-133 g/m
2
Paper Capacity: 50 sheets / 80 g/m2
To add paper to the Sheet Bypass, remove the
leftover paper from the tray, and align it with the
additional paper and load them together onto
the tray.
PUSH
Sheet Bypass
Until it stops
Width Guides
Face Down
Until it stops
Upper Limit Guides
Downloaded From ManualsPrinter.com Manuals 
						

							Problem Solving
28
■ Replacing Toner Bottle/Toner Waste Container
1
Open the Front Cover.
2
Remove the old Toner Waste
Container.
4
Turn the Empty Toner Bottle to
counter clockwise, then remove
the old Toner Bottle.
3
Equip the Cap to the hole of
container.
●Do not reuse the toner from the Toner
Waste Container.
Maintenance
●For optimum copy quality use the recommended Panasonic Toner.
Do not unseal the Toner Bottle unless you are ready to use it.ATTENTION
5
Turn the Corona Cleaner Handle.
Front Cover
Toner Waste  Container
Cap
Toner Waste Container
Toner Bottle (Empty)
To Release
Corona Cleaner Handle
Downloaded From ManualsPrinter.com Manuals 
						

							29
Problem Solving
6
Slide the Corona Cleaner in and
out 3 or 4 times slowly, then return
the Corona Cleaner Handle to
original position.
7
Shake the New Toner Bottle well.
9
Turn the New Toner Bottle to
clockwise.
8
Install the New Toner Bottle.
10
Install the New Toner Waste
Container, then close the Front
Cover.
●Do not reuse the toner from the Toner
Waste Container.
To  Lock
Toner Bottle (New)
Corona Cleaner
Toner Bottle (New)
Toner Bottle (New)
Toner Waste 
Container (New)
Downloaded From ManualsPrinter.com Manuals 
						

							Problem Solving
30
■Removing Misfed Paper (Paper Exit Area) (J46)
1
Open the Left Cover.
2
Turn the Jam Removal Knob.
4
Close the Left Cover.
●Do not scratch or touch the surface of the OPC Drum (Green) with bare hands. The OPC Drum is
sensitive to light.
To prevent optical exposure problems, do not expose the OPC Drum to direct sunlight or bright light.ATTENTION
3
Remove misfed paper.
●Make sure that the Jam Error Code and Misfed
Indicator disappears after removing the misfed paper.
●The Jam Error Code and Misfed Indicator will not
disappear if the paper is still jammed in the machine.
Check again and remove all misfed paper.
NOTE
Left CoverLeft CoverLeft Cover
Jam Removal
Knob
Misfed Paper
Downloaded From ManualsPrinter.com Manuals