Panasonic DP 1515P User Manual

							11
Making Copies
5
Enter the Number of Copies.
Keypad (Max. 999)
●When changing the number of copies,
re-enter it (3 digits) with the Keypad.
Ex:Changing from 2 to 5 copies.
Enter 005 with the Keypad.
6
Press Start key.
START key
●When canceling the copy job, press the
STOP key, then press the 
 key.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Copies
12
Basic Copies
■Reduction/Enlargement
Copying with the Preset or Variable Zoom Ratios
1
Place the Original(s).
(See page 10)
2
Select Original Size with the
ORIGINAL SIZE key.
(From Platen only)
ORIGINAL SIZE key
A3        B4        A4      A4        A5      A5(A4-R) (A5-R)
●Paper Tray will be selected according to
the copy size.
●When the suitable paper is not in the
paper tray, use the sheet bypass.
(See page 27)
3
Select Copy Size with the COPY
SIZE key.
For Preset Ratio:
COPY SIZE key
A3        B4        A4      A4        A5      A5(A4-R) (A5-R)
For Variable Zoom Ratio:
Adjust the Zoom Ratio (50 to 200 %) with
 or  key of the keypad.
 : To Reduce in 1 % (Down to 50 %)
 : To Enlarge in 1 % (Up to 200 %)
A4->A4 [A4  ]
ZOOM:100% COPIES:001
●When changing the paper size, do not use
the COPY SIZE key. Use the PAPER TRAY
key.
PAPER TRAY key
4
Select Original Mode or adjust
scanning contrast if necessary.
(See page 10)
Downloaded From ManualsPrinter.com Manuals 
						

							13
Making Copies
5
Enter the Number of Copies.
Keypad (Max. 999)
6
Press Start key.
START  key
● When canceling the copy job, press the
STOP  key, then press the 
 key.
NOTE
●When copying with the Sort Mode from the Platen
Glass, place the next original and follow the
instructions described on the LCD display.
(See pages 14-15)
● After finishing copying, press the Stop key to return
to the initial screen of the current active mode.
● When changing the number of copies,
re-enter it (3 digits) with the Keypad.
Ex: Changing from 2 to 5 copies.
Enter 005 with the Keypad.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Copies
14
Creative Features
■Sort
Sort:
Multiple copy sets are sorted automatically. Rotated Sort:
When loading both A4 and A4-R sized paper are stacked in
alternate direction (rotation of 90 degrees). (See page 20)
1
Place the Original(s).
(See page 10)
2
Select Original Size with the
ORIGINAL SIZE
 key.
(From Platen only)
ORIGINAL SIZE  key
A3        B4        A4      A4        A5      A5(A4-R) (A5-R)
3
Select the Sort mode with the
SORT key.
SORT Indicator
Lights: Sort Mode
Off     : Non Sort Mode
SORT key
● When copying from the ADF, Sort mode is
selected by standard setting.
● Rotate-Sort mode is only available when
copy size is A4 only and stacked both A4
and A4-R sized paper is stocked into the
paper trays/sheet bypass .
4
Select the required settings.
(See page 10)
5
Enter the Number of Copies.
Keypad  (Max. 999)
6
Press Start key.
START  key
● When canceling the copy job, press the
STOP  key, then press the 
 key.
●When changing the number of copies,
re-enter it (3 digits) with the Keypad.
Ex: Changing from 2 to 5 copies.
Enter 005 with the Keypad.
Downloaded From ManualsPrinter.com Manuals 
						

							15
Making Copies
NOTE
7
Select  1:YES or 2:NO. From Platen Glass only:
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES Go to step 8.
2: NO Starts making copies.
8
Place the next Original.
(See page 10)
9
Press Start key.
START key
10
Select  1:YES or 2:NO.
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES If copying another original,
repeat steps 8 and 9.
2: NO Starts making copies.
●After finishing copying, press the Stop key to return
to the initial screen of the current active mode.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Copies
16
Creative Features
■Skyshot
Digital Skyshot allows the copying of a manuscript without
generating dark borders even if the ADF or Platen Cover is open.
1
Opening the Platen Cover or ADF
and Place Original on the Platen
Glass.
Face Down
● If the original is
not positioned
properly a
portion of the
original may
not be copied.
● For originals
smaller than
A5 size,
position the
original within
the A5  area
and select A5.
● An incorrect detection of the original may
occur when a strong light shines onto the
glass during digital skyshot mode.
● Incorrect exposure may occur when there
is a black line at the edge of the original or
an image which the machine interprets as
a black pattern in the digital skyshot mode.
2
Select Original Size with the
ORIGINAL SIZE  key.
ORIGINAL SIZE  key
A3        B4        A4      A4        A5      A5(A4-R) (A5-R)
3
Enter the Number of Copies.
Keypad (Max. 999)
4
Press Start key.
START  key
● When canceling the copy job, press the
STOP  key, then press the 
 key.
● When copying with the Sort Mode, place
the next original and follow the
instructions described on the LCD
display. (See pages 14-15)
A5-R
A4-R
A3 B4
A5
A4
Original Guides
NOTE
● The Digital Skyshot has 2 modes (NORMAL and
QUALITY). The default setting of Digital Skyshot
Mode is NORMAL. QUALITY can be selectable,
refer to the  Copier Settings  in the Function Mode.
(See page 21)
NORMAL
Default setting (usually select this mode).
QUALITY
For better definition, select the Quality mode. ●
When changing the number of copies,
re-enter it (3 digits) with the Keypad.
Ex: Changing from 2 to 5 copies.
Enter 005 with the Keypad.
Downloaded From ManualsPrinter.com Manuals 
						

							17
Making Copies
■Job Build and SADF
Special originals (like thin paper, etc.) can be fed from
the ADF Tray and copied continuously using the Job
Build and SADF Mode. ●
The default setting of Job Build and SADF is OFF.
When using this mode, change the default setting to
ON in the Copier Settings. (See page 21)
1
Place the Original(s).
For SADF :First one Original
Minimum 55  g/m2
For Job Build :First Originals
Maximum 50 sheets (80  g/m
2)
A
B
C
Face Up
Original Guides
Adjust to the
original’s width
T ray
(Max. 50
A4 size originals)
● Hold the Guide by the center when
adjusting the width.
2
Select the required settings.
(See page 10)
3
Enter the Number of Copies.
Keypad  (Max. 999)
4
Press Start key.
START  key
● When canceling the copy job, press the
STOP  key, then press the 
 key.
5
Place the next original(s) within
5 sec. of last ejected copy.
For SADF :First one Original
Minimum 55  g/m
2
For Job Build :First Originals
Maximum 50 sheets (80  g/m2)
● When changing the number of copies,
re-enter it (3 digits) with the Keypad.
Ex: Changing from 2 to 5 copies.
Enter 005 with the Keypad.
Downloaded From ManualsPrinter.com Manuals 
						

							Making Copies
18
Other Feature
■Energy Saver (Power Saver Mode, Sleep/Shutdown Mode)
These modes save power while the machine is not in use.
Power Saver Mode Sleep/Shutdown Mode
To enter To enter
Automatically enters the Sleep/Shutdown Mode
after 10 minutes* from the last job.
 * To adjust the default Sleep/Shutdown Mode
timer. (See page 20)
Press the Energy Saver key.
 or
Automatically enters the Power Saver Mode
after 10 minutes* from the last job.
 * To adjust the default Sleep/Shutdown
Mode timer. (See page 20)
Flashes:
Power Saver Mode
To exit
Press the Energy Saver or Any  key.
Lights:
Sleep/Shutdown Mode
To exit
Press the Energy Saver key.
●The default setting of Sleep/Shutdown Mode is
Sleep.
The Sleep or Shutdown Mode can be selected in
the General Settings. (See page 20)
Modes Power Consumption Warm Up Time Unavailable Functions
Standby Approx. 120 W — ————————
Power Saver Approx. 19.5 W Approx. 30 sec. ————————
Sleep Approx. 9.5 W Approx. 30 sec. ————————
Shutdown Approx. 1.6 W Approx. 30 sec. • Printer Function
Downloaded From ManualsPrinter.com Manuals 
						

							19
Function
Making Copies
Function
■Procedure
1
Press the FUNCTION key.
FUNCTION key
2
Select a desired setting.
Press the
START key.Select a function.
General
Settings
Copy
Settings
3
Set the desired Function
Parameter(s).
Press the
START key.
4
Press the STOP key to Exit this
Function Mode.
STOP key
Select a mode with
the 
 /  key or
Keypad.
Select a setting with
the Keypad.
■Using Function Modes to Change the Initial Machine Modes
General
Settings
General
Settings for
Key OperatorCopier
Settings
Copier
Settings for
Key Operator Input Key Operator Password (3-digit)
General Settings:
Changing the Initial Machine Modes.
Copier Settings:
Changing the Initial Copy Modes.
Downloaded From ManualsPrinter.com Manuals 
						

							Function
20
00 GENERAL LIST Prints the general settings list, and meter count
readings.
PRESS START
01 PAPER SIZE Selects the Paper Tray and sets the Paper Size.
(See page 22)
A4 
 → A4  → B5  → B5  → A5  →
A5 
 → FLS1   → FLS2   →
LEDGER 
 → LEGAL  → LETTER  →
LETTER  → INVOICE  → A3  → B4  →
03 AUTO RESET TIME Selects the Control Panel reset time. 3:1 min.
1:OFF / 2:30 sec / 3:1 min. / 4:2 min. / 5:3 min. /
6:4 min.
04 ENERGY SAVER MODE Sets the Energy Saver mode and time. 3:SLEEP
1:INVALID / 2:POWER SAVER / 3:SLEEP /    10 min.
4:SHUTDOWN
Power Saver mode timer: 1-240 min.
Sleep/Shutdown mode timer: 1-240 min.
06 LANGUAGE DEFAULT
Selects the default message language for the display.
1:FRENCH 2:GERMAN 3:ITALIAN 4:DUTCH
5:PORTUGUESE 6:SPANISH 7:ENGLISH
8:GREEK
09 KEY/TOUCH BEEP Selects the default key sound level. 2:SOFT
1:OFF / 2:SOFT / 3:LOUD
10 BYPASS SET BEEP Selects whether to sound a Beep when paper is 1:INVALID
set on the Sheet Bypass.
1:INVALID / 2:VALID
11ORIG.SET BEEP ADF Selects whether to sound a Beep when paper is 2:VALID
placed on the ADF.
1:INVALID / 2:VALID
12 PAPER OUT ROTATE
Machine will automatically rotate the image to1:OFF
accommodate the orientation of the paper in another
Tray and print when the selected Tray is empty.
1:OFF / 2:ON
13 DEPT. COUNTER MODE Monitors the copy usage of each department. Consult your
1:TOTAL COUNTER authorized
2:DEPT. COUNTER service provider
3:DEPT. COUNTER LIST
■ General Settings
No.
01 SORT MEMORY USAGE Selects whether to display the amount of sort 1: OFF
memory used on the control panel.
1:OFF / 2:DISPLAY
02 DEPT. COUNTER Displays the Total Copy usage and copy limit of
Consult your authorized
the selected department.service provider
03 SORT-ROTATE Selects the rotate-sort mode. 1:OFF
1:OFF / 2:ON (Available for A4 size paper only)
07 MANUAL ADD TONER Adds toner manually.
PRESS START
09 KEY OPERATOR MODE Inputs the key operator password.
ENTER PASSWORD = 
Modes Function Initial Setting
The following Parameter Settings require the input of the Key Operator Password:
■ General Settings (For Key Operator)
No. Modes Function Initial Setting ●When inputting above General Settings mode No., no need to input the first 0, input only the second number of
the two digit display.
Downloaded From ManualsPrinter.com Manuals