Panasonic Dmr Ez48 Operating Instructions Manual

							21
RQT9056
Copying Recordings (DVD 
						

							22
RQT9056
Important: Once deleted, contents cannot be recovered.
Deleting Recordings
 Tips
  Icons such as “ [RAM] ” indicate usable 
discs. Refer to pages 74 and 75.
  [RAM] Deleting an item increases the 
available disc space, for the amount 
of space taken up by the item being 
deleted.
  [-R] [-R]DL] [+R] [+R]DL] Available 
disc space does not increase after 
deletion.
  [-RW‹V›] [+RW] Available disc space 
increases when you delete the last 
recording (the recording space 
may increase slightly when other 
recordings are deleted).
 Notes
  You cannot delete while recording or 
copying.
  [+R] [+R]DL] [+RW] Even if you have set 
protection on other equipment, such 
recordings are deleted.
Delete Navigator
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
 
DRIVE
 SELECT
  to select the DVD drive.
- -
DELETE Navigator Recordings
Previous Page 02/02Next
DVD-RAM- -
- -- -- -
0807
10  10/23 Mon 8   10/23 Mon
DeleteSelectPrevious NextSUB MENU
07Picture VideoB
A ,  to select “Delete” 
then 
OK
[RAM] When the Album View screen is 
displayed, press 
A to switch to the 
Recordings screen.
   , , ,  to select the recording, then OK
FUNCTIONSDVD-RAMCartridge Protection Off
Disc Protection Off
OK
Program PlaybackDelete
Other FunctionsCopy
 With the unit stopped
    to select “Delete”, then
 OK
 Tips
To return to the previous screen
Press [RETURN].
To view other pages
  Press [, , , ] to select “Previous” or “Next”, then press [OK].
  You can also press [, ] to view other pages.
Multiple editing
Select with [, , , ], then press [ PAUSE]. (Repeat.)
  A checkmark appears. Press [ PAUSE] again to cancel.
Deleting Recordings During Playback
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
     to select “Delete” then OK
 During playback
 DELETE
POWERPOWER
SLOW/SEARCH

SCHEDULE
OK
FUNCTIONS
TV/VIDEO
PA U S ESTOP
321
654
987
0
REC MODE
RETURNSUB MENU
CM SKIP
DIRECTNAVAIGATAAOR
DISPLAYAUDIO
REC
DRIVE
 SELECT
F RecSTATUS
CHAPTERCREATE 
INPUT SELECT
DELETEFAVORITE
CH
CH
PLAY
VOL
AB
FUNCTIONS 


 
DVD/VHS 
VCR/TV
TRACKING/V-LOCK
SKIP/INDEXREWFF
TIME SLIP/     JET REW
RESET
Preparation:
  Turn on the television and select the appropriate video input to suit the 
connections to this unit (Example: AV input, CH3 or CH4).
  Insert the disc containing the recording to be deleted.
[RAM] If the disc is protected, release protection (
						

							23
RQT9056
Important Notes for Recording 
Analog broadcasts:
[RAM] [VHS]
Both Main and SAP audio are recorded.
You can change the audio during playback (
						

							24
RQT9056
DVD Recording Modes and Estimated Disc Recording Time
Advanced Recording
EP (6H)2
EP (8H)
LP
SP
XP
Recording time
Picture quality
1  It is not possible to record or play continuously from one side of a 
double sided disc to the other.
2  When “Recording Time in EP Mode” has been set to “EPExtended 
Play (6H)” in the Setup menu (
						

							25
RQT9056
Important:
Formatting permanently deletes all disc contents 
(including computer data), regardless of protection status 
of disc.
[RAM] [-RW‹V›] [+RW]
OK
The following screen may 
appear when inserting a new 
disc, etc.
Only format the disc if you 
intend to use it for recording.
Do not format if you intend to 
view pre-recorded material from the disc.
 to select “Yes”, then OK
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
Finalize
Finalizing is necessary to enable playback
of the disc on compatible DVD players.
Once finalized, recordings cannot be added to the disc.
It will take approximately 
 minutes. Start?
this unit. You  can Finalize it later. Press “REC” to start finalizing.
Press the OPEN/CLOSE button to postpone
finalizing. The disc can be played only on
After recording, if you 
press [ OPEN/CLOSE] 
to eject the disc, the 
following screen may 
appear.
REC
 to start  nalizing.
or
OPEN/CLOSE  to eject the disc without 
 nalizing.
When the format con rmation screen is 
displayed
When removing a recorded disc
 Notes
You cannot stop  nalizing once you have started it.
 Tips
  If you want to provide the disc with a name or set play menu 
select, select “Disc Name” (
						

							26
RQT9056
Specifying the Recording Time
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]
Digital broadcasts cannot be recorded to video tape.
This function allows specifying the length of recording 
time up to 4 hours.
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
The unit sets the best possible picture quality that  ts the 
recording within the remaining disc space.
The recording mode becomes FR mode. Refer to “FR 
(Flexible Recording)” (
						

							27
RQT9056
To cancel a scheduled recording in 
progress
  
 to select “Stop recording”, 
then 
OK
To release the unit from recording 
standby 
(Before recording starts)
Check, Change, or Delete Programs
  
–  See  “Tips”  (
						

							28
RQT9056
Preparation:
  Turn on the unit and connected equipment.
  [RAM] If the disc is protected, release protection 
(
						

							29
RQT9056
 Notes
  If the desired audio is not recorded, select the kind of audio for 
“Select Audio Channel For DV Input” in the Setup menu (
						

							30
RQT9056
[DVD-V]
Generally, menu screens that appear on the TV may be 
navigated as follows:
, , ,  to select an item, then 
OK
You can sometimes use the numbered buttons to 
select an item.
[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
Advanced Disc Playback
Menu Screens on the TV
Selecting Recordings to Play
  , , ,  to select the 
recording you want to watch, 
then 
OK
Search
Direct Play
  During playback
 or 
–  There are 5 search speeds. Each press increases 
the search speed.
–  Press [ PLAY] to restart normal playback.
 Notes
If “” appears on the TV, the operation is prohibited by the unit or 
disc.
 Tips
To select the recording with the numbered buttons
e.g., “5”:  [0]