Panasonic Dmr Eh75 Operating Instructions Manual

71
RQT8346
[HDD] [RAM]
Preparation
≥Press [DRIVE SELECT] to select the drive (HDD or DVD).
≥Release protection (l70).
After performing steps 1 to 3 (l70)
[4]Press [3,4] to select “Delete All Titles” and 
then press [ENTER].
[5]Press [2,1] to select “Yes” and then press 
[ENTER].
[6]Press [2,1] to select “Start” and then press 
[ENTER].
A message appears when finished.
[7]Press [ENTER].
Note
≥Once deleted, the recorded contents are lost and cannot be 
restored. Make certain before proceeding.
≥Deleting...

72
RQT8346
HDD, disc and card management
Refer to the control reference on page 70.
[-R] [-R[DL] [-RW‹V›] [+R] [+R[DL] [+RW]
You can select the background that will be displayed as the 
DVD-Video top menu after finalizing.
After performing steps 1 to 3 (l70)
[4]Press [3,4] to select “Top Menu Style” and 
then press [ENTER].
[5]Press [3, 4, 2, 1] to select the background 
and then press [ENTER].
≥You can change thumbnails displayed in the top menu. (l52, 
Change Thumbnail)
[-R] [-R[DL] [-RW‹V›] [+R]...

73
RQT8346
Entering text
[HDD] [RAM] [-R] [-R[DL] [-RW‹V›] [+R] [+R[DL] [+RW] [SD]
You can give names to recorded titles, etc.
The maximum number of characters:
Note
If a name is long, parts of it may not be shown in some screens.
[1]Show Enter Name screen.[2]Press [3, 4, 2, 1] to select a character and 
then press [ENTER].
Repeat this step to enter other characters.
≥To erase a character
Press [3, 4, 2, 1] to select the character in the name field 
and then press [;, PAUSE]. (The selected characters are...

74
RQT8346
Changing the unit’s settings
[1]While stopped
Press [FUNCTIONS].
[2]Press [3,4] to select “Other Functions” and 
then press [ENTER].
[3]Press [3,4] to select “Setup” and then press 
[ENTER].
[4]Press [3,4] to select the tab and then press 
[1].
[5]Press [3,4] to select the menu and then press 
[ENTER].
[6]Press [3,4] to select the option and then 
press [ENTER].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
Note
There may be differences in...

75
RQT8346
 TabsMenusOptions (Underlined items are the factory presets.)
Disc
Settings for Playback
Press [ENTER] to show the following settings.
Ratings
Set a ratings level to limit DVD-Video play.
Follow the on-screen instructions. Enter a 4-digit 
password with the numbered buttons when the password 
screen is shown.
≥Do not forget your password.≥8 No Limit
: All DVD-Video can be played.
≥1 to 7: Prohibits play of DVD-Video with corresponding 
ratings recorded on them.
≥0 Lock All: Prohibits play of...

76
RQT8346
Changing the unit’s settings
 TabsMenusOptions (Underlined items are the factory presets.)
Audio
Dynamic Range Compression [DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.≥On≥Off
Multi-channel TV Sound (MTS)
Select whether to record the main or secondary (SAP) audio 
type when:
≥Recording to a DVD-R, DVD-R DL, DVD-RW (DVD-Video 
format), +R, +R DL and +RW.
≥When “Recording for High-Speed Copying” is set to “On”.
≥Recording or copying sound in LPCM. (lbelow, Audio...

77
RQT8346
 Ta b sMenusOptions (Underlined items are the factory presets.)
TV 
Screen
TV Type (l26)
Set to match the type of television connected.4:3 TV
≥Aspect 4:3 & 480i
16:9 Aspect (Widescreen TV)
≥Aspect 16:9 & 480i≥Aspect 4:3 & 480p
≥Aspect 16:9 & 480p
Functions of HDMI
Press [ENTER] to show the following settings.
HDMI Video Output≥On
:
≥Off: When video output from COMPONENT VIDEO OUT terminal.
HDMI Resolution
You can only select items compatible with the 
connected equipment. This setting normally...

78
RQT8346
Changing the unit’s settings
When connecting with an HDMI cable to an amplifier, use the 
following settings on this unit if you cannot set the speaker delay 
effect on the amplifier.
[1]Press [3, 4, 2, 1] to select the speaker icon (A) and then 
press [ENTER].
[2]Press [3,4] to select the setting and then press [ENTER].
Icon examples: 
Surround speaker (LS)
≥Large: Select when the speaker supports low-frequency (under 
100 Hz) reproduction.
≥Small: Select when the speaker does not support...

79
RQT8346
Channel/Clock settings when TV Guide On Screen® system is not used
Refer to the control reference on page 74.
Preparation:
If the program listings has already been downloaded, return the unit to the factory preset condition using the steps indicated below.
When the unit is on and stopped
1Press and hold [CH, X] and [CH, W] on the main unit for about 5 seconds.
The unit turns off.
2Press [Í, DVD/VHS POWER] to turn the unit on.
3After the language and TV aspect is setup, press [RETURN] and exit...

80
RQT8346
Channel/Clock settings when TV Guide On Screen® system is not used
Refer to the control reference on page 74.
You can use the preset captions, or manually enter new ones 
yourself. The captions you enter are displayed when the channel is 
displayed and in the Direct Navigator screen.
[1]While stopped
Press [FUNCTIONS].
[2]Press [3,4] to select “Other Functions” and 
then press [ENTER].
[3]Press [3,4] to select “Setup” and then press 
[ENTER].
[4]Press [3,4] to select “Channel” and then 
press...