Panasonic Dmr Eh75 Operating Instructions Manual

61
RQT8346
≥The VHS status messages are not shown while copying. (l76)
While both VHS and HDD or DVD are stopped
Press and hold [2VHS] or [VHS1] on the main 
unit for about 3 seconds or more (until “START” 
on the unit’s display terminates flashing).
≥The “COPYING” indicator on the main unit lights.
≥Check if copy starts properly.
∫When the finalize screen appears (l60)
∫When copy without finalize
When copying starts, the selected drive automatically changes to 
HDD. Therefore, the current state of the...

62
RQT8346
Copying titles or playlists
[HDD] > [RAM] [-R] [-R[DL] [-RW‹V›] [+R] [+R[DL] [+RW] [VHS]
[RAM] [-RW‹VR›] [+RW] > [HDD] [VHS]
You can arrange titles and playlists as desired for copy.
(You cannot copy to finalized discs.)
Copy to:
≥DVD: insert a disc that you can use for recording (l5–7, 12).
≥VHS: insert a video cassette with an accidental erasure prevention 
tab (l11, 12).
≥Confirm that there is enough remaining disc or tape space.
Copy from:
≥DVD: insert the disc containing the program to be...

63
RQT8346
Copy Navigator/Copying list icons
∫To edit the copying list
Select the item in step 6–4 (l62)
[1]Press [SUB MENU].
[2]Press [3,4] to select the operation and then 
press [ENTER].
Clear All:
Clear all items registered on the copying list.
Press [2, 1] to select “Yes” and then press [ENTER].
Add:Add new items to the copying list.
Press [3, 4, 2, 1] to select the playlists or titles to be added and 
then press [ENTER].
Remove:
Remove the selected items.
Press [2, 1] to select “Yes” and then press...

64
RQT8346
Copying titles or playlists
Preparation
Copy to:
≥DVD: insert a disc that you can use for recording (l5–7, 12).
≥VHS: insert a video cassette that you can use for recording and 
search for the position to start recording. (l11, 12).
≥Confirm that there is enough remaining disc or tape space.
Copy from:
≥DVD: insert the disc containing the program to be copied.
≥VHS: insert the video cassette containing the program to be copied 
and search for the position to start copying.After performing...

65
RQT8346
[8]Press [2,1] to select “Yes” and then press 
[ENTER] to start copying.
≥Copying is automatically stopped when the tape reaches the 
end or the remaining capacity of the disc is filled. (A message 
appears on the TV screen and then disappears a few seconds 
later.)
To return to the previous screen
Press [RETURN].
∫About FR recording mode
([VHS] > [HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW] only)
When the recording mode is set to FR and “Time Limit” is set to 
“Off”:
≥All the recorded contents on the...

66
RQT8346
Copying still pictures
[HDD] [RAM] [SD]
≥You can use SD Memory Cards with capacities from 8 MB to 2 GB 
(l7).
≥Still pictures recorded on CD-R or CD-RW cannot be copied.
[SD]
While stopped, put the card in the SD slot, and the menu (lbelow) 
is automatically displayed.
Press [3,4] to select “Copy pictures” and then press [ENTER]. 
Then go to step 4 on page 67, “Copying all the still pictures on a 
card—Copy all Pictures”. 
Press [RETURN] to exit the screen.
≥You cannot copy still pictures...

67
RQT8346
To stop copying
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
∫To edit the copying list
Select the item in step 5–3 (for a still picture) or 5–5 
(for a folder) (l66)
[1]Press [SUB MENU].
[2]Press [3,4] to select the operation and then 
press [ENTER].
Clear All:
Clear all items registered on the copying list.
Press [2, 1] to select “Yes” and then press [ENTER].
Add:
Add new items to the copying list.
Press [3, 4, 2, 1] to select the still picture or...

68
RQT8346
Recording from a video cassette recorder
e.g.:  Connecting other video equipment to the IN2 or DV input 
terminals
You can also connect to the IN1or IN3 input terminals on the 
rear.
≥Turn off the unit and other video equipment before connecting.
If the audio output of the other equipment is monaural
Connect to L/MONO on the IN2 input terminals at the front.
¢The S-VIDEO terminal achieves a more vivid picture than the 
VIDEO terminal.
When recording from the unit’s DV terminal
Select the type...

69
RQT8346
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
When the “DV Camcorder Rec.” function is used, programs are 
recorded as a title. At the same time chapters are created at each 
break in the images and the playlist is created automatically.
Preparation
1Turn off the main unit and DV equipment, then connect the DV 
equipment with the unit’s DV input terminal (l68).
2Turn on the main unit and then press [REC MODE] to select the 
recording mode.
3Turn on the DV equipment and pause play on the DV equipment...

70
RQT8346
Convenient functions
HDD, disc and card management
[HDD] [RAM] [-R] [-R[DL] [-RW‹V›] [+R] [+R[DL] [+RW] [-RW‹VR›] [SD]
≥You can use SD Memory Cards with capacities from 8 MB to 2 GB 
(l7).
[1]While stopped
Press [FUNCTIONS].
[2]Press [3,4] to select “Other Functions” and 
then press [ENTER].
[3]Press [3,4] to select “HDD Management”, 
“DVD Management” or “Card Management” and 
then press [ENTER].
e.g., [RAM]
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN]...