Panasonic Dmr E65 Operating Instructions Manual

							31
RQT7303
Playing back
This function works only when the elapsed play time is displayed.
§Only when you have selected “480P” in “TV Type” (➡page 12).Status messages appear on the television during operation to show 
the condition of the unit.
Press [STATUS].
The display changes each time you press the button.
≥Displayed information are examples.
Play menu–Change the play sequence
Repeat play
≥All[VCD] [CD] (excluding MP3 discs)
≥Chapter[RAM] [DVD-R] [DVD-V]
≥Group[DVD-A] [CD] (MP3 discs only)
≥PL (Play list)[RAM]
≥Title[RAM] [DVD-R] [DVD-V]
≥Tr a c k[DVD-A] [VCD] [CD]
Select “OFF” to cancel.
Video menu–Change the picture quality
Picture
≥Normal:Default setting
≥Soft: Soft picture with fewer video artifacts
≥Fine:  Details are sharper
≥Cinema:Mellows movies, enhances detail in dark scenes.
≥User: You can make further adjustments. 
Press [3,4,2,1] to select “Detail picture 
adjustment” and press [ENTER].
Contrast
Increases the contrast between light and dark parts of 
the picture.
Brightness
Brightens the picture.
Sharpness
Adjust the sharpness of the edges of the horizontal 
lines.
Color
Adjusts the shade of the picture’s color.
Gamma
Increases the brightness of the center ranges to improve 
detail and contrast in dark scenes.
3D NR
Reduces overall noise.
Integrated DNR
Reduces mosaic noise and character smudging.
MPEG-DNR (When any item other than “User” is selected)
You can turn the recommended settings for 3D NR and 
Integrated DNR on and off.
Progressive
§ (➡page 48)
Select “ON” to enable progressive output.
≥Select “OFF” if the picture is stretched horizontally.
≥When progressive output is on, closed captions cannot be 
displayed.
Transfer
§ [When “Progressive” (➡above) is set to “ON”.]
Select the method of conversion for progressive output to suit 
the type of material being played (➡page 48, Film and 
video).
≥Auto1 (normal):
Detects 24 frame-per-second film content and 
appropriately converts it.
≥Auto2:Compatible with 30 frame-per-second film content 
in addition to 24 frame-per-second film content. 
(Picture distortion may occur depending on the 
content)
≥Video:Select when using “Auto1” and “Auto2”, and the 
video content is distorted.
Audio menu–Change the sound effect
V.S.S. [RAM] [DVD-R] [DVD-V]
(Dolby Digital , 2-channel or over only)
Enjoy a surround-like effect if you are using two front 
speakers only.
≥Turn V.S.S. off if it causes distortion.
≥V.S.S. does not work for SAP recordings.
Dialog Enhancer [DVD-A] [DVD-V]
(Dolby Digital, 3-channel or over only, including a center channel)
The volume of the center channel is raised to make dialog 
easier to hear.
Status messages
0:50  XP 6/8 10:15 PM
π T2     0:05.14  XP
π T1     0:00.10  SP
REC
LR
DVD-RAM
PLAY
Remain     π
Title number and elapsed time 
during recording/Recording mode
No displayAvailable recording time/ 
Recording mode 
Play position within the title
Title number and elapsed time during play/
Recording modeRecording or play status/input 
channel
Audio type
Date and timeSelected drive/type of disc
7303en.book  31 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							32
RQT7303
Editing
Editing titles/chapters
[RAM] [DVD-R]
≥The maximum number of items on a disc
–Titles: 99
–Chapters: Approximately 1000
(Depends on the state of recording.)
[Note]
≥Once erased, divided or shortened, it cannot be restored to its 
original state. Make certain before proceeding.
≥You cannot edit during recording or chasing play, etc.
≥Restricted recording information remains even after editing (e.g. 
dividing a title, etc).Preparation
≥Press [DVD] to select the DVD drive.
≥Release protection (➡page 40). [RAM]
1Press [DIRECT NAVIGATOR].
2Press [3,4,2,1] to select “VIDEO” 
tab and press [ENTER].
3Press [3,4,2,1] to select the title.
4Press [SUB MENU], then [3,4] to 
select the operation and press [ENTER].
≥If you select “Edit”, press [3,4] to select the operation and 
press [ENTER].
If you select “Chapter View”
5Press [3,4,2,1] to select the 
chapter.
To start play ➡ Press [ENTER].
To edit ➡ Step 6.
≥To show other pages/Multiple editing (➡above)
6Press [SUB MENU], then [3,4] to 
select the operation and press [ENTER].
≥You can go back to the Title View.
To exit the screen
Press [DIRECT NAVIGATOR].
To return to the previous screen
Press [RETURN]. Title/Chapter
Programs are recorded as a single title consisting of one chapter.
You can divide a title into multiple chapters. [RAM]
(➡page 26, Create chapters, ➡page 33, Divide Chapter)
You can change the order of chapters and create a play list 
(➡page 34). [RAM]
≥Titles are divided into about 5-minute chapters after finalizing 
(➡page 41). [DVD-R]
POWER
VOLUMECHINPUT SELECT
DVD POWER TV
TV/VIDEO
1 DVD
SD/PC
23
456
78
09
CM SKIP
AUDIOPA G E
CH
CANCELVCR Plus+
SKIP
STOPPA U S EPLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER SETUPInfo
PROG/CHECKTV GUIDE
REC MODE ERASE
REC
STATUS TIME SLIP DISPLAY
DRIVE SELECT
3 4 2 1 
ENTER 1
RETURN SUB MENUDIRECT
NAVIGATOR
: 9;
DVD
ChapterTitle
Start End
Chapter Chapter Chapter ChapterTitle
Editing titles/chapters and playing 
chapters
To show other pages
Press [3,4,2,1] to select “Previous” or “Next” and 
press [ENTER].
≥You can also press [:, 9] to show other pages.
Multiple editing
Select with [3,4,2,1] and press [;]. (Repeat.)
A check mark appears. Press [;] again to cancel.
Title View
SelectPlayPrevious02/02NextSUB MENU
10 10/27 Mon
0708
8 10/27 Mon
- - - - - -- -
PICTUREVIDEODVD-RAM DIRECT NAVIGATORTitle View screen
Divide Title
Set up Protection
Cancel Protection
Shorten
Change Thumbnail
Enter Name
Properties
Edit
Chapter ViewErase
Refer to “Title 
operations”.
Chapter View
SelectPlayPrevious01/01NextSUB MENU
08 8 10/27 Mon001--- --- ---
--- --- ---
--- ---
--- --- ---
PICTUREVIDEODVD-RAM DIRECT NAVIGATORChapter View screen
Divide Chapter
Combine Chapters
Title View Erase Chapter
Refer to “Chapter 
operations”.
7303en.book  32 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							33
RQT7303
Editing
§ Multiple editing is possible.
§ Multiple editing is possible.
Title operations
Erase§
[RAM] [DVD-R]
Press [2,1] to select “Erase” and press [ENTER].
≥Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding.
≥The available recording time on DVD-R does not increase when you erase titles.
Properties
[RAM] [DVD-R]Information (e.g., time and date) is shown.
Enter Name
[RAM] [DVD-R]You can give names to recorded titles.
➡page 37, Entering text
Set up Protection§
Cancel Protection§
[RAM]If set, this will protect the title from accidental erasure.
Press [2,1] to select “Yes” and press [ENTER].
The lock symbol appears when the title is protected.
Shorten
[RAM]You can remove unnecessary parts of the recording such as commercials.
1Press [ENTER] at the start point and end point of the 
section you want to erase.
2Press [3,4] to select “Exit” and press [ENTER].
≥Select “Next” and press [ENTER] to erase other sections.
3Press [2,1] to select “Erase” and press [ENTER]. 
Change Thumbnail
[RAM] [DVD-R]You can change the image to be shown as the thumbnail picture in the Title 
View.
1Press [1] (PLAY) to start play.
2Press [ENTER] when the image you want to use as a 
thumbnail is shown.
3Press [3,4] to select “Exit” and press [ENTER].
Divide Title
[RAM]You can divide a title into two.
1Press [ENTER] at the point you want to divide the title.
2Press [3,4] to select “Exit” and press [ENTER].
3Press [2,1] to select “Divide” and press [ENTER].
To confirm the division point
Press [3,4] to select “Preview” and press [ENTER]. (The unit plays 10 
seconds before and after the division point.)
To change the division point
Restart play and press [3,4] to select “Divide”, then press [ENTER] at the point you want to change.
[Note]
≥The divided titles retain the name and CPRM property (➡page 48) of the original title.
≥Video and audio just before and after the dividing point may momentarily cut out.
Properties
No.
CH Date01
4 6/20/2002Start
Rec time10:00 AM
1:15 (SP) WedDinosaur
DVD-RAM DIRECT NAVIGATOR Title V
10 10/27 Mon
0708
8 10/27 M
o
-- --
Shorten
Start
NextExit0:43.21
PLAY08End
- -:- -.- - - -:- -.- -Start End
PICTUREVIDEODVD-RAM DIRECT NAVIGATOR
Change Thumbnail
Change
Exit0:01.05
0:01.05 Change
08PICTUREVIDEODVD-RAM DIRECT NAVIGATOR
Divide Title
Preview
ExitDivide
0:43.21
-- : -- . --Divide
08PLAYPICTUREVIDEODVD-RAM DIRECT NAVIGATOR
Chapter operations
Erase Chapter§
[RAM]
Press [2,1] to select “Erase” and press [ENTER].
≥Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding.
Divide Chapter
[RAM]
1Press [ENTER] at the point you want to divide.
≥Repeat this step to divide at other points.
2Press [3,4] to select “Exit” and press [ENTER]. 
Combine 
Chapters
[RAM]
Press [2,1] to select “Combine” and press [ENTER].
≥The selected chapter and next chapter are combined.
For quicker editing
≥Use search, Time Slip or slow-motion (➡page 25) to find the desired point.
≥Press [:, 9] to skip to the end of a title.
Divide Chapter
Divide
Exit0:43.21
PLAY008PICTUREVIDEODVD-RAM DIRECT NAVIGATOR
7303en.book  33 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							34
RQT7303
Editing
Creating, editing and playing play lists
[RAM]
≥The maximum number of items on a disc
–Play lists: 99
–Chapters in play lists: Approximately 1000
(Depends on the state of recording.)
[Note]
You cannot create or edit a play list while recording.
Preparation
≥Press [DVD] to select the DVD drive.
≥Release protection (➡page 40). [RAM]
1While stopped
Press [FUNCTIONS].
2Press [3,4,2,1] to select “PLAY 
LIST” and press [ENTER].
3Press [3,4,2,1] to select “Create” 
and press [ENTER].
4Press [2,1] to select the source title 
and press [4].
≥Press [ENTER] to select all the chapters in the title, then 
skip to step 6.
5Press [2,1] to select the chapter you 
want to add to a play list and press 
[ENTER].
Press [3] to cancel.
≥You can also create a new chapter from the source title. 
Press [SUB MENU] to select “Divide Chapter” and press 
[ENTER] (➡page 33, Divide Chapter).
6Press [2,1] to select the position to 
insert the chapter and press [ENTER].
≥Press [3] to select other source titles.
≥Repeat steps 5–6 to add other chapters.
7Press [RETURN].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN]. You can arrange the chapters (➡page 32) to create a play list.
≥Editing play lists doesn’t modify the recorded data.
≥Play lists are not recorded separately so this doesn’t use much 
capacity.
Creating play lists
POWER
VOLUMECHINPUT SELECT
DVD POWER TV
TV/VIDEO
1 DVD
SD/PC
23
456
78
09
CM SKIP
AUDIOPA G E
CH
CANCELVCR Plus+
SKIP
STOPPA U S EPLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER SETUPInfo
PROG/CHECKTV GUIDE
REC MODE ERASE
REC
STATUS TIME SLIP DISPLAY
DRIVE SELECT
3 4 2 1 
ENTER
RETURN SUB MENU
DVD
FUNCTIONS
Title
ChapterTitle
Play listChapter Chapter Chapter Chapter
Chapter Chapter
DIRECT NAVIGATOR
TIMER RECORDING
FLEXIBLE RECORDING
SETUP
DUBBING
DISC SETTING
Record
Dubbing
/ Edit
Set up Play backDISC PROTECTION  OFFPLAY LIST
TV GUIDEEPG
SD/PCDVDDVD-RAMCARTRIDGE PROTECTION  OFF 
DVD-RAM PLAY LIST Play List View
Previous01/01Next
- - - - - -- - - - - -
Create
DVD-RAM PLAY LIST Create08 8 10/27 Mon
01
001--- --- ---
Source Title
Source Chapter
Chapters in PLAY LIST01/01
001/001
001/00102
002003
DVD-RAM PLAY LIST Create08 8 10/27 Mon
01
001--- --- ---
--- --- --- ---
Source Title
Source Chapter
Chapters in PLAY LIST01/01
001/001
001/00102
002003
DVD-RAM PLAY LIST Create08 8 10/27 Mon
01
001--- --- ---
--- --- --- ---
Source Title
Source Chapter
Chapters in PLAY LIST01/01
001/001
001/00102
002003
Press RETURN to exit.
7303en.book  34 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							35
RQT7303
Editing
1Press [FUNCTIONS].
2Press [3,4,2,1] to select “PLAY 
LIST” and press [ENTER].
3Press [3,4,2,1] to select the play list.
To start play ➡ Press [ENTER].
To  e d i t ➡ Step 4.
≥To show other pages/Multiple editing (➡page 32)
4Press [SUB MENU], then [3,4] to 
select the operation and press 
[ENTER].
≥If you select “Edit”, press [3,4] to select the operation and 
press [ENTER].
If you select “Chapter View”
5Press [3,4,2,1] to select the 
chapter.
To start play ➡ Press [ENTER].
To  e d i t ➡ Step 6.
≥To show other pages/Multiple editing (➡page 32)
6Press [SUB MENU], then [3,4] to 
select the operation and press 
[ENTER].
≥You can go back to the Play List View.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
§ Multiple editing is possible.
Editing chapters in a play list does not modify the source titles and 
source chapters.
§ Multiple editing is possible.
Editing and playing play lists/chapters
DVD-RAM PLAY LIST Play List View
SelectPlayPrevious01/01NextSUB MENU
01
- - - - - -- - - -
Create10/27 Mon  0:30
Play List View 
screen
Copy
Enter Name
Change Thumbnail
Create
Properties
Edit
Chapter ViewErase
Refer to “Play list 
operations”.
DVD-RAM PLAY LIST Chapter View
SelectPrevious01/01NextSUB MENU
08 10/27 Mon 0:30--- ---
--- --- ---
--- ---
--- --- ---001002
Play
Chapter View 
screen
Move Chapter
Divide Chapter
Combine Chapters
Erase Chapter
Play List ViewAdd Chapter
Refer to “Chapter operations”.
Play list operations
Erase§Press [2,1] to select “Erase” and 
press [ENTER].
Properties
Play list information (e.g., time and date) 
is shown.
Create➡page 34, Creating play lists
Copy§Press [2,1] to select “Copy” and 
press [ENTER].
Enter Name➡page 37, Entering text
Change 
Thumbnail➡page 33, Change Thumbnail
Chapter operations
Add 
Chapter➡page 34, Creating play lists, Step 4–6
Move 
Chapter
Press [3,4,2,1] to select the 
position to insert the chapter and 
press [ENTER].
Divide 
Chapter➡page 33, Divide Chapter
Combine 
Chapters➡page 33, Combine Chapters
Erase 
Chapter
§
➡page 33, Erase Chapter
Properties
No.
Chapters01
012Date
Time6/20/2002 Wed
0:30.05Dinosaur
DVD-RAM PLAY LIST Move Chapter
Previous01/01Next
08 10/27 Mon 0:30--- ---
--- --- ---
--- ---
--- --- ---001002
7303en.book  35 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							36
RQT7303
Editing
Editing still pictures
[RAM] [SD] [PC]
Preparation
≥Press [DVD] or [SD/PC] to select the drive.
≥Release protection (➡page 40).
1Press [DIRECT NAVIGATOR].
2[RAM]
Press [3,4,2,1] to select 
“PICTURE” tab and press [ENTER].
3Press [3,4,2,1] to select the still 
picture.
≥To show other pages/Multiple editing (➡page 32)
≥To select the still pictures in another folder (➡page 29)
4Press [SUB MENU], then [3,4] to 
select the operation and press 
[ENTER].
∫To edit still picture folders
In step 3 (➡above)
1Press [3,4,2,1] to select “Folder” and 
press [ENTER].
2Press [3,4] to select the folder.
≥To show other pages/Multiple editing 
(➡page 32)
3Press [SUB MENU], then [3,4] to select the operation and 
press [ENTER].
≥To select another higher folder (➡page 29)
To exit the screen
Press [DIRECT NAVIGATOR].To return to the previous screen
Press [RETURN].
§ Multiple editing is possible.
POWER
VOLUMECHINPUT SELECT
DVD POWER TV
TV/VIDEO
1 DVD
SD/PC
23
456
78
09
CM SKIP
AUD IOPA G E
CH
CANCELVCR Plus+
SKIP
STOPPA U S EPLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER
SETUP
If
PROG/CHECKTV GUIDE
REC MODE ERASE
REC
STATUS
TIME SLIP DISPLAY
DRIVE SELECT
3,4,2,1 
ENTER
RETURN
SUB MENU
 
DIRECT
NAVIGATOR
DVD, SD/PC
DIRECT
NAVIGATOR
Set up Protection
Cancel Protection
Start Slide Show
Slide IntervalDPOF Erase Picture
below
page 29
Folder NameSet up Protection
Cancel Protection
DPOF
Erase Whole  Folder
Picture and folder operation
Erase Picture§
Erase Whole Folder§
[RAM] [SD] [PC]
Press [2,1] to select “Erase” and press [ENTER].
≥Once erased, the recorded contents are lost and cannot be restored. Make certain before 
proceeding.
≥When erasing a folder, even the files not containing still pictures will also be erased if they are inside the 
folder.  (This does not apply to folders under the folder concerned.)
Set up Protection§
Cancel Protection§
[RAM] [SD] [PC]If set, this will protect the still picture or folder from accidental erasure.
Press [2,1] to select “Yes” and press [ENTER].
The lock symbol appears when the still picture or folder is protected.
≥Even if the protection setting is used by this unit to protect a folder, the folder 
may be erased by another unit.
DPOF§
[SD] [PC]You can select a whole folder or individual pictures for printing and specify the number of prints to be 
made.
Press [2,1] to select number of print (0 to 9) 
and press [ENTER].
The DPOF mark appears.
≥This appears on the still pictures inside a folder when you make the DPOF setting for the folder.
To cancel the print setting
Set the number of print to “0”.
≥When this is set by this unit, any settings established by other units will be released.
≥Print settings (DPOF) made using this unit may not be viewable on other equipment.
≥Settings cannot be made for folders and files not in accordance with DCF standards or if there is no 
remaining space on the card.
Folder Name
[RAM] [SD] [PC]You can give names to still picture folders.
➡page 37, Entering text
≥Folder names input using this unit may not be displayed on other equipment.
DIRECT NAVIGATOR PicSD CARD
0001Folder     103__0002
00050006
DPOF
SELECT
Set up DPOF on the picture (JPEG).
The contents set with other units will be erased.
1Press ENTER to confirm.Number of prints
7303en.book  36 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							37
RQT7303
Editing
Entering text
[RAM] [DVD-R] [SD] [PC]
You can give names to recorded titles, etc.
The maximum number of characters:
[Note]
If a name is long, parts of it may not be shown in some screens.
1Show Enter Name screen.
2Press [3,4,2,1] to select a 
character and press [ENTER].
Repeat this step to enter other characters.
≥To erase a character
Press [3,4,2,1] to select the character in the name field 
and press [;].
≥Using the numbered buttons to enter characters
e.g., entering the letter “R”
1Press [7] to move to the 7th 
row.
2Press [7] twice to highlight 
“R”.
3Press [ENTER].
≥To enter a space
Press [¢CANCEL] and press [ENTER].
3Press [∫] (SET).
Returns to the previously displayed screen.
To end partway
Press [RETURN].
Text is not saved.
[DVD-R]
For your reference
If you enter a long name, only part of it is shown in the TOP MENU 
after finalization (➡page 41). When entering a title name, the name 
that will appear in the TOP MENU can be previewed in “Display in 
DVD-R TOP MENU” window. [RAM]Characters
Title 64
Play list 64
Disc 64
Folder of still pictures 36
[DVD-R]Characters
Title 44
Disc 40
[SD] [PC]Characters
Folder of still pictures 36
POWER
VOLUMECHINPUT SELECT
DVD POWER TV
TV/VIDEO
1 DVD
SD/PC
23
456
78
09
CM SKIP
AUDIOPA G E
CH
CANCELVCR Plus+
SKIP
STOPPA U S EPLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER SETUPInfo
PROG/CHECKTV GUIDE
REC MODE ERASE
REC
STATUS TIME SLIP DISPLAY
DRIVE SELECT
3,4,2,1 
ENTER
RETURN ∫ ; ¢ CANCEL
Numbered 
buttons
Title
Select “Enter Name” in step 4 on page 32.
Play list
Select “Enter Name” in step 4 on page 35.
Disc
Select “Disc Name” in step 3 on page 40.
Folder of still pictures
Select “Folder Name” in step 4 on page 36.
_Enter Name
1 1
2
3
4
5
6
7
8
9
0
¢2345
ABC a
DE F d
GH I
NOg
JKL j
M
m
67890
bcij
ef /l%
hifl$¢
&
klON@
n]_o[
SPACE
SETERASE
0¢PQRS p
TUV t
WX Y Z wqrs ( )
uv { }-
xyz
`^| 
! ?\
   .
   ,

:
; ––
π;
Name field: shows the text you have entered
5
6
7
8NO
JKL
M
PQRS
TUV
7
77
Chapter 1_Enter Name
Display in DVD-R
TOP MENU1 1
2
3
4
52345
ABC a
DE F d
GH I g67890
bcij
ef /l%
hifl$
*
&S
Chapter 1
7303en.book  37 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							38
RQT7303
Transfer (Dubbing)
Transferring (dubbing) still pictures
[RAM] [SD] [PC]
1While stopped
Press [FUNCTIONS].
2Press [3,4,2,1] to select 
“DUBBING” and press [ENTER].
If you are not going to change the registered list press [4] 
several times (➡ step 6).
3Press [3,4] to select “Dubbing 
direction” and press [1].
1Press [3,4] to select “Source” and press [ENTER].
2Press [3,4] to select the drive and press [ENTER].
3Press [3,4] to select “Destination” and press 
[ENTER].
4Press [3,4] to select the drive and press [ENTER].
The same drive as the transfer (dubbing) source can be 
selected.
5Press [2] to confirm.
4Press [3,4] to select “Create list” 
and press [1].
Select the transferring (dubbing) items and register on the list.
∫To register individual still pictures
1Press [3,4] to select “New entry” and press 
[ENTER].
2Press [3,4,2,1] to select a still picture and press 
[ENTER].
≥To select a multiple number of items together, press [;] 
to add the check mark and press [ENTER] (➡ right, 
Multiple editing).
≥To show other pages (➡ right)
≥To select the still pictures in another folder (➡ right)
≥To edit the transferring (dubbing) list (· right)
∫To register on a folder by folder basis
1Press [3,4] to select “Picture/Folder” and press 
[ENTER].
2Press [3,4] to select “Folder” and press [ENTER].
3Press [3,4] to select “New entry” and press 
[ENTER].
4Press [3,4] to select the folder and press [ENTER].
≥To select a multiple number of items together, press [;] 
to add the check mark and press [ENTER] (➡ below, 
Multiple editing).
≥To show other pages (➡ below)
≥To switch another higher folder (➡ below)
≥To edit the transferring (dubbing) list (· below)
Still pictures and folders cannot be registered on the same list.
5Press [3,4] to select “SET” and 
press [ENTER].
The transferring (dubbing) list is registered.
6Press [3,4] to select “Start 
dubbing” and press [ENTER].
≥For individual still pictures only
When specifying another folder as the transferring (dubbing) 
destination, select “Folder”.
Press [2,1] to select “Yes” and press [ENTER] to start 
transferring (dubbing).
To stop transferring (dubbing)
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
∫To select another folder
1Press [3,4,2,1] to select “Folder” and press [ENTER].
2Press [3,4] to select the folder and press [ENTER].
≥The still pictures of different folders cannot be registered on the 
same list.
≥If there is a multiple number of higher 
folders recognizable, you can switch 
them using [2,1]. (Folders whose 
higher folders are different cannot be 
registered on the same list.)
∫To edit the transferring (dubbing) list
Select the item in step 4 (➡left)
1 Press [SUB MENU].
2 Press [3,4] to select the operation and press 
[ENTER].
§ Multiple editing is possible (➡below).
To cancel all registered transferring (dubbing) setting and lists
In step 3 (➡left)
1 Press [3,4] to select “Cancel all” and press [ENTER].
2 Press [2,1] to select “Yes” and press [ENTER].
≥The settings and lists may be cancelled in the following situations.
–When a still picture or folder has been recorded or erased at the 
transfer (dubbing) source
–When steps have been taken, for instance, to turn off the unit, 
remove the card, open the tray, change the transfer (dubbing) 
direction, etc.
Transferring (dubbing) using the 
transferring (dubbing) list
VOLUMECHINPUT SELECTTV/VIDEO
1 DVD
SD/PC
23
456
78
09
CM SKIP
AUD IOPA G E
CH
CANCELVCR Plus+
SKIP
STOPPA U S EPLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER SETUPInfo
PROG/CHECKTV GUIDE
REC MODE ERASE
REC
STATUS TIME SLIP DISPLAY
DRIVE SELECT
3 4 2 1 
ENTER
RETURN
¥ REC REC MODE FUNCTIONS ; DVD, SD/PC
SUB MENU
: 9
INPUT SELECT
∫ 
Dubbing
SD card
DVD Set the dubbing direction.1
2
3Source
Destination Cancel all
Dubbing direction
Mode
Create listSD card > DVD
Picture High Speed
0
01/01
DubbingCreate a dubbing list.
Space on destination: 4343MB
No.  Capacity
PreviousNew entry
Next
SET
1
2
3Cancel allPicture
Dubbing direction
Mode
Create listPicture/Folder
Start dubbing
SD card > DVD
Picture High Speed
Name
To show other pages
Press [3,4,2,1] to select “Previous” or “Next” and press 
[ENTER].
≥You can also press [:, 9] to show other pages.
Multiple editing
Select with [3,4,2,1] and press [;]. (Repeat.)
Press [ENTER] to register to the list.
≥A check mark appears. Press [;] again to cancel.
DubbingCreate a dubbing list.
Space on destination: 4343MB
No.  Capacity
New entry1
2Cancel allPicture
Dubbing direction
ModePicture/Folder
SD card > DVD
PictureHigh Speed
Name
Folder
Make a new folder and dub to it?New folder\JPEG\DCIM001
001 100__DVD
002 101__DVD003 102__DVD------New folder
Create list Select pictures        SD CARD
0001Folder103__DVD000200030004
\DCIM
001 100__DVD
002 101__DVD003 102__DVD---\DCIM\@__DVD004 103__DVD
002 101__DVD003 102 DVD\DCIM001 100__DVD
Add
Erase§
Erase all
7303en.book  38 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							39
RQT7303
Transfer (Dubbing)
[SD] or [PC] > [RAM]
Preparation
Press [SD/PC] to select the source drive.
1While stopped
Press [FUNCTIONS].
2Press [3,4,2,1] to select “COPY 
ALL PICTURES” and press [ENTER].
3Press [3,4] to select “Copy from” 
and press [2,1] to select the drive.
≥If there is a multiple number of higher folders recognizable, 
you can switch them using [2,1].
4Press [3,4,2,1] to select “Copy” 
and press [ENTER].
To stop transferring (dubbing)
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
Transferring (dubbing) all the still 
pictures of a card onto a DVD-RAM—
COPY ALL PICTURES
[Note]
≥When transferring (dubbing) the still pictures on a folder by 
folder or card by card basis, files other than the still picture files 
inside the folder will also be transferred (dubbed). (This does 
not apply to the lower folders contained inside the folders.)
≥If still pictures are already contained inside the transfer 
(dubbing) destination folder, the new still pictures are recorded 
following the existing still pictures.
≥If the space on the destination drive runs out or the number of 
files/folders to be transferred (dubbed) exceeds the maximum 
(➡page 28), transferring (dubbing) will stop partway through.
≥When a name has been input by this unit for the transfer 
(dubbing) source folder, the folder name will be reflected in the 
transfer (dubbing) destination folder.
≥Print number setting (DPOF) is not transferred (dubbed).
≥The sequence in which the still pictures are registered on the 
transfer (dubbing) list may not be reflected at the transfer 
(dubbing) destination.
Copy All Pictures (JPEG)
Copy from
SD card
\DCIM
Copy to
DVD
\JPEG\DCIM001
Copy all pictures (JPEG) in the card
Recording from a video 
cassette recorder
Refer to the control reference on page 38.
[RAM] [DVD-R]
Preparation
≥Connect a video cassette recorder to this unit’s input terminals.
≥Press [DVD] to select the DVD drive.
[Note]
When recording using this unit’s input terminals, only the sound 
received at the time of recording will be recorded.
As long as secondary audio that is recorded on the video cassette is 
not output on the unit in play, it is not recorded.
e.g.: Connecting to the L2 input terminals
≥Turn off the unit and other video equipment before connecting.
If the audio output of the other equipment is monaural, connect to L/
MONO.
§The S-VIDEO terminal achieves a more vivid picture than the 
VIDEO terminal.
1While stopped
Press [INPUT SELECT] to select the 
input channel for the equipment you 
have connected.
e.g., If you have connected to L2 input terminals, select “L2”.
2Press [REC MODE] to select the 
recording mode.
3Start play on the other equipment.
4Press [¥REC].
Recording starts.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart recording.)
To stop recording
Press [∫].
To record programs to fill up the remaining space on the disc
➡page 18, Flexible Recording
Almost all videos and DVD software on sale have been 
treated to prevent illegal copying. Any software that has 
been so treated cannot be recorded using this unit.
RECOPEN/CLOSEPOWERCH TIME SLIPSD CARD PC CARD EJECTTIME SLIP
SD PC DV DDRIVE SELECT/x1. 3
L2S-VIDEO IN VIDEO IN AUDIO INRL/MONO
L/MONO - AUDIO IN - RVIDEO INS-VIDEO IN
Audio/Video cable 
S-Video 
cable§
Other video equipmentYellow White Red This unit
7303en.book  39 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							40
RQT7303
Convenient functions
FUNCTIONS window
By using the FUNCTIONS window you may access the main 
functions quickly and easily.
1While stopped
Press [FUNCTIONS].
Functions displayed depend on the selected drive or type of 
disc.
2Press [3,4,2,1] to select an item 
and press [ENTER].
To exit the FUNCTIONS window
Press [FUNCTIONS].
POWER
VOLUMECHINPUT SELECT
DVD POWER TV
TV/VIDEO
1 DVD
SD/PC
23
456
78
09
CM SKIP
AUDIOPA G E
CH
CANCELVCR Plus+
SKIP
STOPPAUSEPLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER SETUPInfo
PROG/CHECKTV GUIDE
REC MODE ERASE
REC
STATUS TIME SLIP DISPLAY
DRIVE SELECT
3,4,2,1 
ENTER
RETURN
FUNCTIONS DVD, SD/PC
Record
Dubbing
/ Edit
Set up Play back
SD/PC
DIRECT NAVIGATOR
TIMER RECORDING
FLEXIBLE RECORDING
SETUP
DUBBING
DISC SETTING
PLAY LIST
TV GUIDEEPG
DVDDVD-RAMDISC PROTECTION  OFFCARTRIDGE PROTECTION  OFF
Disc and card setting
Refer to the control reference on the left.
∫Setting the protection for the whole disc or card≥For a DVD-RAM with a cartridge or for a card
[RAM]
With the write-protect tab in the protect position, 
play automatically starts when inserted in the unit.
[SD] [PC]
Switch the write-protect switch to 
the “LOCK” position.
≥For a DVD-RAM without a cartridge (➡ below, Disc Protection)
∫Other protection settings
[RAM]
Preparation
Press [DVD] to select the DVD drive.
1While stopped
Press [FUNCTIONS].
2Press [3,4,2,1] to select “DISC 
SETTING” and press [ENTER].
3Press [3,4] to select “Disc 
Protection” and press [ENTER].
4Press [2,1] to select “Yes” and 
press [ENTER].
The lock symbol appears closed when the disc is write-
protected.
[RAM] [DVD-R]
Preparation
≥Press [DVD] to select the DVD drive.
≥Release protection (➡above).
1While stopped
Press [FUNCTIONS].
2Press [3,4,2,1] to select “DISC 
SETTING” and press [ENTER].
3Press [3,4] to select “Disc Name” 
and press [ENTER].
➡page 37, Entering text
≥The disc name is displayed in the FUNCTIONS window.
≥With a finalized DVD-R, the name is displayed on the Top Menu.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
Setting the protection
Title
Select “Set up Protection” in step 4 on page 32.
Still picture or folder
Select “Set up Protection” in step 4 on page 36.
Disc Protection
Providing a disc with a name
PROTECT
LOCKe.g. SD Memory 
Card
DVD-RAMTitles 11
UsedFree
0 : 225:38 (EP)
OnDisc Name
Earse all titles
Format disc
Disc Protection
DISC SETTING
My favorite 01/0201
Chapter 102Chapter 2Play back
SD/PC
DIRECT NAVIGATOR
DVDDVD-RAMDISC PROTECTION  OFFCARTRIDGE PROTECTION  OFFDocumentary
7303en.book  40 ページ  ２００４年５月３１日　月曜日　午前９時３２分