Panasonic Dmr E65 Operating Instructions Manual

							21
RQT7303
Recording
Entering PlusCode® number is an easy way of timer recording. You 
can find them in TV listings in newspapers and magazines.
≥You can enter up to 8 days in advance.
≥VCR Plusi system works only after this unit downloads the 
television program list (➡page 10).
1Press [VCR Plusr].
2Press [3,4] to select “PlusCode”.
3Press the numbered buttons to enter 
the PlusCode number.
≥To correct the number
Press [3] and press [4]. Enter the number again from the 
beginning.
4Press [ENTER].
If a program which is being broadcast at the time is registered, 
timer recording will start immediately.
Repeat steps 1–4 to program other recordings.
≥As long as the setting is not changed, the program is 
recorded in the recording mode selected by the unit. To 
change the setting ➡page 19, To change the setting, steps 
3–4.
5Press [TV GUIDE].
The message “TURN RECORDER OFF FOR TIMER 
RECORDING.” is shown on the television.
≥If the unit is already in the timer recording standby mode (if 
“F” is already on the units display), the unit turns off 
automatically. You need not take step 6 to complete the 
procedure.
6Press [ÍDVD POWER] to turn the 
unit off.
“F” lights on the unit’s display to indicate timer recording 
standby has been activated.
\Note\
≥Timer recording will work only if “F” is displayed.
≥“F” flashes when the unit cannot go to timer recording standby 
(e.g., a recordable disc is not in the disc tray).
∫Operations that can be performed during timer 
recording standby
≥You can play discs. Do not press [ÍDVD POWER] but [1](PLAY) 
or [DIRECT NAVIGATOR] instead. Timer recording works even 
during disc play. [RAM]
≥You can add, change or delete programs scheduled for timer 
recording. [RAM] [DVD-R]
–To add a scheduled program (➡step 1)
–To change or delete a scheduled program (➡page 22)
∫To release the unit from recording standby
Press [ÍDVD POWER].
The unit turns on and “F” goes out.
≥Be sure to press [ÍDVD POWER] to return the unit to standby 
mode before the scheduled recording time.
∫To cancel recording when recording has already 
begun
Press [∫], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the main unit for more than 3 
seconds to stop recording.
Using VCR Plusi system to make timer 
recordings
Date :
Start Time :
End Time  :
Channel :
Quality :
PlusCode :  4 /  1 / 04
  8 : 00 pm
10 : 00 pm
 56
    SP
  
=========
FAVORITES
Sat     2:00pm    Dodzilla            Once Sat     1:00pm     NWBG            Once
Sat     3:00pm    Bull house      Weekly
Sat     3:30pm    Be switched    Weekly
4/3 
     4:00pm    Baseball           Once
LISTINGS MESSAGES SCHEDULE
RECORD
REMOVEFREQUENCYINFO.
87NWBGSP
R
R
R
WR
WR
1:00 1:55
∫Even if you have forgotten to set the timer 
recording standby mode
Two minutes before the time when the timer recording is 
scheduled to commence, the unit automatically turns off and will 
be placed in the standby mode. (The “F” appears on the display.) 
If play or recording is being performed, it will be interrupted.
Notes on timer recording
≥When you program successive timer recordings to start 
immediately one after the other, the unit cannot record the part 
at the ending of the earlier program (approximately 15 
seconds). In addition, when recording to DVD-R, the unit 
cannot record the part at the beginning of the later program 
(approximately 15 seconds).
≥If you set DST (Daylight Saving Time) to ON when manually 
setting the clock (➡page 11), timer recording may not work 
when summer switches to winter and vice versa.
Program Program
Recorded
Not recordedRecordedNot recorded [DVD-R]
7303en.book  21 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							22
RQT7303
Recording
Timer recording
1Press [PROG/CHECK].
2Press [3,4] to select the program.
∫To change the recording frequency
Press the “Green” button.
∫To change the time and recording mode
1Press [ENTER].
2Change the setting as necessary and press [ENTER].
≥To set recording to start early or end late
Press [3,4] to select “Start early by” or “End late by” and 
press the numbered buttons to enter minutes (up to 99).
≥To change the recording mode
Press [3,4] to select “Quality” and press the “Blue” button.
Each time you press the button:
∫To delete the program
Press the “Blue” button.
∫To exit the screen
Press [TV GUIDE].
The message “TURN RECORDER OFF FOR TIMER 
RECORDING.” is shown on the television. 
≥If the unit is already in the timer recording standby mode (if “F” is 
already on the units display), the unit turns off automatically.
∫To put the unit on timer recording standby
Press [ÍDVD POWER] to turn the unit off.
“F” lights on the unit’s display to indicate timer recording standby 
has been activated.
∫When there is a duplicate or overlapping 
program timer recording
The program timer recording that was set last is recorded. None of 
the program that was set earlier is recorded even if there is only 
partial overlapping.
Program timer recordings that are not recorded are highlighted in 
grey.
Check, change or delete a program
POWER
VOLUMECHINPUT SELECT
DVD POWER TV
TV/VIDEO
1 DVD
SD/PC
23
456
78
09
CM SKIP
AUD IOPA G E
CH
CANCELVCR Plus+
SKIP
STOPPA U S EPLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER SETUPInfo
PROG/CHECKTV GUIDE
REC MODE ERASE
REC
STATUS TIME SLIP DISPLAY
DRIVE SELECT
PROG/CHECK
Í DVD POWER
3 4 2 1 
ENTER
TV GUIDE PAG E  WX CH
Info“Green” button
 (CHAPTER) “Blue” button
Numbered 
buttons
FAVORITES
Sat     2:00pm    Dodzilla            Once Sat     1:00pm    NWBG              Once
Sat     3:00pm    Bull house      Weekly
Sat     3:30pm    Be switched    Weekly
4/3
     4:00pm    Baseball           Once
LISTINGS MESSAGES SCHEDULE
RR
R
WR
WR
SET TIMER
RECORD
Sat    1:00pm     NWBG            Once
REMOVEFREQUENCYINFO.
87NWBGSP
R
1:00      1:55
Channel or program name (a program name that was set 
for timer recording using TV Guide On ScreenTM system 
or VCR Plusi system that was listed in the program list)
Recording mode (➡page 17)
Frequency (➡page 19, 20)LP#EP#FR#XP#SP
^==============}
Start early by :
End late by :
Quality : 00  minutes
 00  minutes
       SP
Program set last
Recorded Time
Programs set earlierNot recorded Not recorded
7303en.book  22 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							23
RQT7303
Recording
Utilizing TV Guide On ScreenTM system
Press [TV GUIDE].
Programs are categorized by color.
∫Selecting the program from the desired program 
category and setting timer recording
1 Press [3] several times to select “LISTINGS”.
2 Press [2,1] to select “SORT” and press [4].
3 Press [2,1] to select the major category and press [4].
4 Press [3,4,2,1] to select the minor category and press 
[ENTER].
5 Press [3,4,2,1] to select.
≥When sorting alphabetically, press [ENTER] and [3,4] to 
select.
6 Press the “Green” button.
∫Changing the size of information window
Press [Info] while the program is highlighted.
∫Adjusting the channel line-up
If the television program list’s channel line-up differs from what you 
were expecting, perform the following steps.
1 Press [3] several times to select “LISTINGS”.
2 Press [2,1] to select “SETUP” and press [4].
3 Press [3,4] to select “Change system settings” and press 
[ENTER].
4 Press [3,4] to select “Yes, but my channel line-up is incorrect” 
and press [ENTER].
≥When there is more than one cable network transmitting television 
program listings in the area where you are living, more than one 
channel line-up is displayed. Press [3,4] to select one and then 
press [ENTER].
≥Alternatively, you can customize the channel line-up in the Channel 
Editor (➡ right, Customizing the channel line-up). Press [3,4] to 
select “No Match” and then press [ENTER].
∫Selecting the TV Guide On ScreenTM system 
start up pattern
1 Press [3] several times to select “LISTINGS”.
2 Press [2,1] to select “SETUP” and press [4].
3 Press [3,4] to select “Review options” and press [ENTER].
4 Press [3,4] to select the option and press [ENTER].
≥On: Turns on auto start up.
≥Off: Turns off auto start up.
∫Reading messages
You may receive messages regarding new TV Guide On 
ScreenTM system functions or special promotions. When there 
are unread messages, an envelope-shaped icon appears at the 
upper left of the screen.
1 Press [3] several times to select “LISTINGS”.
2 Press [2,1] to select “MESSAGES” and press [4].
3 Press [3,4] to select the message and press [Info].
≥To delete unwanted messages press the “Green” button.
≥Messages are automatically deleted after 60 days.
≥The ID number appears at the end of the list.
∫Customizing the channel line-up
1Press [3] several times to select “LISTINGS”.
2Press [2,1] to select “SETUP” and press [4].
3Press [3,4] to select “Change channel display” and press 
[ENTER].
4Press [3,4] to select the channel.
≥Press [PAGE WXCH] to skip one screen.
To hide the channel
Press the “Green” button to select “OFF”.
To change the channel number
Press the numbered buttons.
e.g. 1:  [0] ➡ [0] ➡ [1]
15:  [0] ➡ [1] ➡ [5]
115:  [1] ➡ [1] ➡ [5]
To change the order of the channels
1Press [2].
2Press the “Blue” button to move up or the “Green” button to 
move down.
Repeat step 4 as necessary.
5 Press [TV GUIDE].
∫Registering a program you don’t want to miss as 
a “Favorite”
By registering a program as “Favorite” in advance, you can later tune 
to that program quickly by pressing the “Blue” button when that 
program begins broadcasting.
When you cannot remember the television program you want to 
watch, we recommend you press the “Blue” button when the 
television reception screen is displayed. This unit may tune in your 
“Favorite” program.
1 Press [TV GUIDE].
2Press [3,4,2,1] to select the program.
3 Press the “Blue” button.
“ ” appears in the list to indicate that the program is set as a 
“Favorite”.
≥Press the “Green” button to change the frequency.
Each time you press the button:
≥Press the “Blue” button to cancel.
Repeat steps 2–3 to set other programs.
≥When there is more than one program registered as “Favorite” in 
the same time frame, each time you press the “Blue” button, the 
program switches to the other.
∫Viewing TV Guide On ScreenTM system 
explanations and promotions
1Press [3] several times to select “LISTINGS”.
2Press [2,1] to select “PROMOTIONS” and press [4].
3Press [3,4] to select and press [Info]. Green: Sports Blue: Children’s
Purple: Movies Teal: Other categories
TODAYTODAYLastChannel
SORT SCHEDULE
FAVORITES RECORD INFO.
87NWGB
R
BOX
p
T
VTVNWBGducation
ANiMeNetworkPBS
LISTINGS8:30PM 8:00PM
8:00   8:30
R
On-screen guidance
The functions of the “Green” and “Blue” buttons on 
the remote control are displayed.Information 
window
Icons
Stereo
Closed caption
Re-run Advertise-
mentsProgram viewed before the 
program list was opened.
[.
l
l
l
l
l
l
l
{Registers as “Favorite” only once.
;
A program becomes a “Favorite” when the 
broadcast time and program name match.
;
Registers as “Favorite” weekly.
;
“Favorite” registration temporarily off.
pTV
TV
NWBGducation
    5    ON
  12    ON
  22    ON
PTV-S
TV-TR
NWBG
EDU
CANCEL ON/OFF INFO.
    2    ON
pTV
TV
NWBGducation
    5    ON
  12    ON
  22    ONTV-TR
NWBG
EDU
MOVE UP MOVE DOWNINFO.
    2    ON
PTV-S
R
W
7303en.book  23 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							24
RQT7303
Playing back
Playing recorded video contents/Playing play-only discs
≥It is not possible to play continuously from one side of a double 
sided disc to the other. You will need to eject the disc and turn it 
over.
≥When using 8 cm (3″) DVD-RAM, remove the disc from the 
cartridge.
Preparation
Press [RETURN] to exit the television program list if it is displayed on 
the television. To turn off auto start up of the television program list 
➡page 23, Selecting the TV Guide On Screen
TM system start up 
pattern.
1Press [DVD] to select the DVD drive.
The DVD indicator lights up on the unit.
2Press [
						

							25
RQT7303
Playing back
Operations during play
Stop
Press [∫].
The stopped position is memorized.
“PLAY” flashes in the unit’s display. (Excluding when playing from the Direct 
Navigator and when playing a play list.)
Resume play function
Press [1] (PLAY) to restart from this position.
Pa usePress [;].
Press again to restart play.
Search
Press [6] or [5].
≥On the main unit, press and hold [D] or [E].
≥The speed increases up to 5 steps.
≥Press [1] (PLAY) to restart play.
≥Audio is heard during first level search forward.
You can turn off the sound during search (➡page 43, “Search Audio & PLAY k1.3”).
Audio is heard during all levels of search. [DVD-A] (excluding moving picture parts) [CD]
Skip 
Press [:] or [9].
≥On the main unit, press [D] or [E].
≥Each press increases the number of skips.
Starting from a 
selected item
Press the numbered buttons.
e.g., 5: [0] ➡ [5][CD] (MP3 discs only) 5:  [0] ➡ [0] ➡ [5]
15: [1] ➡ [5] 15:  [0] ➡ [1] ➡ [5]
[DVD-A] Selecting groups
While stopped (screen saver is displayed on the television ➡right)
5: [5]
≥This works only when stopped (screen saver is displayed on the television 
➡right) with some discs.
Quick View
[RAM]
The play speed can be increased 
without distorting the audio.
Press and hold [1](PLAY/a1.3).
≥Press again to return to normal speed.
≥This does not work if the setting is “Off” in “Search Audio & PLAY k1.3” (➡page 43).
Slow-motion
[RAM] [DVD-R] [DVD-A] (Motion 
picture parts only) [DVD-V] [VCD]
While paused, press [6] or [5].
≥On the main unit, press and hold [D] or [E].
≥The speed increases up to 5 steps.
≥Press [1] (PLAY) to restart play.
≥Forward direction only. [VCD]
≥The unit will pause if slow-motion play is continued for 5 minutes.
Frame-by-frame
[RAM] [DVD-R] [DVD-A] (Motion 
picture parts only) [DVD-V] [VCD]
While paused, press [2;] or [;1].
≥Each press shows the next frame.
≥Press [1] (PLAY) to restart play.
≥Forward direction only. [VCD]
Displaying the 
television image as a 
picture-in-picturePress [TIME SLIP].
The unit displays the television image as a 
picture-in-picture.
≥You will hear the playback audio.
≥Press [TIME SLIP] again to cancel.
≥The blue background does not appear on the 
receiving screen even if you select “On” from 
the “Blue Background” in the SETUP menu 
(➡page 44).
Skipping the specified 
time (Time Slip)
[RAM] [DVD-R]
1 Press [TIME SLIP].
2Press [3,4] to select the time and press [ENTER].
Play skips the specified time.
≥Press [TIME SLIP] to show the play images in full.
CM Skip
[RAM] [DVD-R]
Play restarts from approximately a 
minute later.
Press [CM SKIP].
DVDR -
AM
PLAY
Play images
Current receiving images
≥You can change the channel being received by 
pressing [WXCH].
≥You cannot change the channel being received 
while recording.
7303en.book  25 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							26
RQT7303
Playing back
Playing recorded video contents/Playing play-only discs
Refer to the control reference on page 24.
Press [AUDIO].
[RAM] [VCD]
LR>L>R
^---------------}
≥When playing an SAP broadcast recorded on DVD-RAM: 
MAIN()SAP[DVD-A] [DVD-V]
You can change the audio channel number each time you press the 
button. This allows you to change things like the soundtrack 
language (➡page 30, Sound track).
e.g., English is selected.
[Note]
You cannot change the audio type in the following cases.
≥When a DVD-R disc is in the disc tray while DVD drive is selected.
≥When the recording mode is XP and “Audio for XP Recording” is set to “LPCM” (➡page 44).
Editing operations during play
Erase
[RAM] [DVD-R]
1 Press [ERASE].
2 Press [2,1] to select “Erase” and press [ENTER].
≥A title cannot be restored once it is erased. Make certain before proceeding.
≥You cannot erase while recording and playing at the same time.
Create chapters
(➡page 32, Title/Chapter)
[RAM]
Press [CHAPTER].
≥Press [:, 9] to skip to the start of a chapter.
≥You cannot divide while recording and playing at the same time.
Changing audio during play
PLAY
L R
DVD-RAM
e.g., “L R” is selected
Sound track1 ENGÎ Digital  3/2.1ch
7303en.book  26 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							27
RQT7303
Playing back
Using menus to play MP3
[CD] (MP3 discs only)
This unit plays MP3 files recorded on CD-R/RW designed for audio 
recording that are finalized (➡page 48) on a computer. Files are 
treated as tracks and folders are treated as groups.
Preparation
Press [DVD] to select the DVD drive.
1Press [TOP MENU].
2Press [3,4] to select the track and 
press [ENTER].
Play continues to the last track in the last group.
≥“0” indicates the track currently playing.
≥You can also select the track with the numbered buttons.
e.g., 5: [0] ➡ [0] ➡ [5]
15: [0] ➡ [1] ➡ [5]
To show other pages
Press [3,4,2,1] to select “Prev.” or “Next” and press [ENTER].
After listing all the tracks in one group, the list for the next group
appears.
To exit the screen
Press [TOP MENU].While the file list is displayed
1Press [1] while a track is highlighted 
to display the tree screen.
2Press [3,4,2,1] to select a group 
and press [ENTER].
The file list for the group appears.
To return to the file list
Press [RETURN].
POWER
VOLUMECHINPUT SELECT
DVD POWER TV
TV/VIDEO
1 DVD
SD/PC
23
456
78
09
CM SKIP
AUD IOPA G E
CH
CANCELVCR Plus+
SKIP
STOPPA U S EPLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER SETUPInfo
PROG/CHECKTV GUIDE
REC MODE ERASE
REC
STATUS TIME SLIP DISPLAY
DRIVE SELECT
TOP MENU
3 4 2 1 
ENTER
RETURN
DVD
Numbered 
buttons
001 Both Ends Freezing
002 Lady Starfish
003 Life on Jupiter 
004 Metal Glue 
005 Paint It Yellow
006 Pyjamamama
007 Shrimps from Mars
008 Starperson
009 Velvet  Cuppermine
010 Ziggy Starfish
Next Prev.
1
1    :  My favorite
2
3
4
5
6 
7
8
9
10  TOTAL              TRACK                         TREEG            1
T             1
TOTAL        1/111
MENU
0   –   9No.
GROUP No.
Selected group
G: Group No.
T: Track No. in the group
TOTAL: Track No./Total 
tracks in all groups
Using the tree screen to find a group
Tips for making MP3 discs
≥Discs must conform to ISO9660 level 1 or 2 (except for 
extended formats).
≥Compatible compression rate: between 32 kbps and 320 kbps
≥Compatible sampling rate:
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz and 48 kHz
≥Maximum number of tracks and groups recognizable:
999 tracks and 99 groups
≥This unit is compatible with multi-session.
≥This unit is not compatible with ID3 tags or packet writing.
≥Depending on recording, some items may not be playable.
≥Reading or play of the disc may take time if there are a lot of still 
pictures or sessions.
≥The display order may differ from how the order is displayed on 
a computer.
Naming folders and files
≥MP3 files must have the 
extension “.MP3” or “.mp3”.
≥At the time of recording, give 
folder and file names a 3-digit 
numeric prefix in the order you 
want them to play (this may not 
work at times).
≥English alphabets and Arabic 
numerals are displayed 
correctly. Other characters may 
not be displayed correctly.
TREEG  7/25    001 My favorite
        001 Brazilian pops
        002 Chinese pops
        003 Czech pops
        004 Hungarian pops
        005 Liner notes
        006 Japanese pops
        
007 Mexican pops        008 Philippine pops
        009 Swedish pops
            001 Momoko
    002 Standard number
        001 Piano solo
        002 Vocal
MENU
No.
G             8
T            14
TOTAL       40/111
MP3 music
0   –   9You cannot select groups 
that contain no compatible 
files. Selected group No. /Total groups
If the group has no track, “– –” is displayed 
as group number.
002 group
001001 (folder=group)
001track.mp3
002track.mp3
003track.mp3
003 group
001track.mp3 (file=track)
002track.mp3
003track.mp3
001track.mp3
002track.mp3
003track.mp3
004track.mp3
e.g.,
Root
Order of play
7303en.book  27 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							28
RQT7303
Playing back
Playing still pictures
Only insert or remove the SD/PC card after turning the unit off.
When the card indicator (“SD” or “PC”) on the unit’s display is 
flashing, the card is being read from or written to. Do not turn off the 
unit or remove the card. Such action may result in malfunction or 
loss of the card’s contents.
∫SD card slot
∫PC card slot
Regarding still pictures (JPEG, TIFF)
≥Compatible formats:DCF§ compliant (Content recorded on a 
digital camera etc.)
§Design rule for Camera File system: unified standard 
established by Japan Electronics and Information Technology 
Industries Association (JEITA). 
≥File format: JPEG, TIFF (non-compressed RGB chunky format)
≥Number of pixels: 34k34 to 6144k4096 
(Sub sampling is 4:2:2 or 4:2:0)
≥This unit can handle a maximum of 3000 files and 300 folders 
(including higher folders).
≥Operation may take time to complete when playing TIFF format 
still pictures, or when there are many files and/or folders, some 
files may not display or be playable.
≥MOTION JPEG is not supported.
RECTIME SLIP
SD PCDV D
OPEN/CLOSE
DRIVE SELECTPOWERCHTIME SLIP
SD CARD PC CARD EJECT/x1. 3
POWER
VOLUMECHINPUT SELECT
DVD POWER TV
TV/VIDEO
1 DVD
SD/PC
23
456
78
09
CM SKIP
AUDIOPA G E
CH
CANCELVCR Plus+
SKIP
STOPPA U S EPLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER SETUPInfo
PROG/CHECKTV GUIDE
REC MODE ERASE
REC
STATUS TIME SLIP DISPLAY
DRIVE SELECT
ERASE
SUB MENU
 
DIRECT
NAVIGATOR
DVD, SD/PC
3 4 2 1 
ENTER
STATUS DIRECT
NAVIGATOR∫ 
DRIVE SELECT
 
∫ 
Numbered 
buttonsDVD, SD, PC indicator
SD card slotPC card slot
Inserting/Removing the SD/PC card
Inserting the card
Removing the card
Inserting the card
There are cards requiring adaptors (➡page 15).
Removing the card
≥If using the adaptor, remove the adaptor and card together.
POWER
S
D
 C
A
R
DPC CARDEJECTInsert straight-in until it fits 
into space.
Insert label up with cut-off corner at the right.
S
D
 C
A
R
DP
C
 C
A
R
DEJECT
POWER1
2Press on the center of the card.
Draw straight out.
SD CARDP
C CA
RDEJECT
P
O
W
ER
1
2
Hold the edge of the card and insert until it fits 
into place.
≥If using the adaptor, do not press directly on 
the card.
Terminal connections facing into the unit2 align to match 
the mark
The labeled side facing upwards
S
D
 C
A
R
DP
C
 C
A
R
DEJECT
POWER
12
P
C
 C
A
R
DEJECTP
C
 C
A
R
DEJECTP
C
 C
A
R
DEJECT
PushEject button 
comes outPush again
7303en.book  28 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							29
RQT7303
Playing back
[RAM] [SD] [PC]
1Press [DVD] or [SD/PC] to select the 
drive.
≥Each time you press [SD/PC]:
SD card drive ,". PC card drive
≥On the main unit, press 
[DRIVE SELECT] several times. 
The indicator lights up on the unit.
2Press [DIRECT NAVIGATOR].
3[RAM]
Press [3,4,2,1] to select 
“PICTURE” tab and press [ENTER].
4Press [3,4,2,1] to select the still 
picture and press [ENTER].
You can also select still pictures with the numbered buttons.
≥Press [2,1] to display the previous or next still picture.
≥Useful functions during still picture play (➡below).
To stop playing
Press [∫]
To exit the screen
Press [DIRECT NAVIGATOR].
∫To show the picture properties
Press [STATUS] twice.
To exit the picture properties screen
Press [STATUS].
[Note]
≥Still pictures cannot be played during recording.
≥DVD is always selected as the drive when the unit is turned off and 
then turned back on.
[RAM] [SD] [PC] e.g.,
5: [0] ➡ [0] ➡ [0] ➡[5] 115: [0] ➡ [1] ➡ [1] ➡ [5]
15: [0] ➡ [0] ➡ [1] ➡ [5] 1115: [1] ➡ [1] ➡ [1] ➡ [5]
SD PCDV D
e.g., SD card drive
DIRECT NAVIGATOR Picture (JPEG) View
SelectPrevious001/001NextSUB MENUENTER
SD CARD
0001Folder 100__DVD000200030004
0005000600070008
0009------------
PICTUREPicture (JPEG) View 
screen
∫To select the still pictures in another folder
(➡page 15, Structure of folders displayed by this unit)
1Press [3,4,2,1] to select “Folder” and press 
[ENTER].
2Press [3,4] to select the folder and press [ENTER].
You can also select folders with the numbered buttons.
e.g., 5: [0] ➡ [0] ➡ [5]
15: [0] ➡ [1] ➡ [5]
115: [1] ➡ [1] ➡ [5]
≥If there is a multiple number of higher folders recognizable, 
you can switch them using [2,1].
DIRECT NAVIGATOR Picture (JPEG) ViewSD CARD
0001Folder103__DVD000200030004
0005000600070008
PICTURE\DCIM
002 101__DVD003102__DVD---
\DCIM\@__DVD
---
004 103__DVD
001 100__DVD
002 101__DVD003 102 DVD\DCIM001 100__DVD
11 / 10  6:53 PMFolder - Picture No.   102 - 0001
Date   11 / 12 / 2003
No.         3 /    9
Shooting data
Useful functions during still picture play
Start Slide Show
Slide IntervalYou can display still pictures one by one with constant interval.
While the Picture (JPEG) View screen is displayed
1 Press [SUB MENU].
2Press [3,4] to select “Start Slide Show” and press 
[ENTER].
≥To change the display timing
1 Press [3,4] to select “Slide Interval” in step 2 and press [ENTER].
2 Press [2, 1] to select the desired timing (0–30 seconds) and press [ENTER].
Rotate1 Press [SUB MENU].
2Press [3,4] to select “Rotate RIGHT” or “Rotate LEFT” 
and press [ENTER].
≥Rotation information will not be stored.
Zoom in
Zoom out
(Only for a still picture with a low 
pixel count)
1 Press [SUB MENU].
2Press [3,4] to select “Zoom in” and press [ENTER].
≥To return the picture to its original size, press [3,4] to select “Zoom out” in step 2 
and press [ENTER].
≥When zooming in, the picture may be cut off.
≥The enlargement information will not be stored.
Erase1Press [ERASE].
2Press [2,1] to select “Erase” and press [ENTER].
≥Once erased, the recorded contents are lost and cannot be restored. Make certain before 
proceeding.
Set up Protection
Cancel Protection
Start Slide Show
Slide IntervalDPOF Erase Picture
Rotate LEFT Rotate RIGHT
Zoom inRotate LEFT Rotate RIGHT
7303en.book  29 ページ  ２００４年５月３１日　月曜日　午前９時３２分 
						

							30
RQT7303
Playing back
Using on-screen menus and Status messages
1Press [DISPLAY].
≥Depending on the condition of the unit (playing, stopped, 
etc.) and disc contents, there are some items that you 
cannot select or change.
2Press [3,4] to select the menu and 
press [1].
3Press [3,4] to select the item and 
press [1].
4Press [3,4] to select the setting.
≥Some items can be changed by pressing [ENTER].
To clear the on-screen menus
Press [DISPLAY].
§You may have to use the menus (➡page 24) on the disc to make 
changes.
≥The display changes according to the disc content. You cannot 
change when there is no recording.
Audio attribute
Language
On-screen menus
POWER
VOLUMECHINPUT SELECT
DVD POWER TV
TV/VIDEO
1 DVD
SD/PC
23
456
78
09
CM SKIP
AUDIOPA G E
CH
CANCELVCR Plus+
SKIP
STOPPAUSEPLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER SETUPInfo
PROG/CHECKTV GUIDE
REC MODE ERASE
REC
STATUS TIME SLIP DISPLAY
DRIVE SELECT
DISPLAY3 4 2 1 
ENTER
STATUS
Disc
VideoAudio
PlaySound track
Subtitle1
Audio channel
OFF
L R Î Digital   2/0 ch
Menu Item Setting
Disc menu–Setting the disc content
Sound track§
[RAM] [DVD-R]
The disc’s audio attributes appear.
[DVD-A] [DVD-V]
Select the audio and language (➡below, Audio attribute, 
Language).
Subtitle
§
[RAM] [DVD-R] (Only discs that contain subtitle on/off information)
[DVD-A] [DVD-V]
Turn the subtitle on/off and select the language (➡below, 
Language).
≥Subtitle on/off information cannot be recorded using this 
unit. [RAM] [DVD-R]
≥If the subtitles overlap closed captions recorded on discs, 
turn the subtitles off.
Audio channel [RAM] [VCD]
➡page 26, Changing audio during play
Angle
§ [DVD-A] [DVD-V]
STILL-P (Still picture) [DVD-A]
Selects the play method for still pictures.
Slide Show:Plays according to the default order on the disc.
Page:Select the still picture number and play.
≥RANDOM: Plays in random order.
≥Return: Returns to the default still picture on the disc.
PBC (Playback control ➡page 48) [VCD]
Indicates whether menu play (playback control) is on or off.
LPCM/PPCM/ÎDigital/DTS/MPEG: Signal type
k (kHz): Sampling frequency
b (bit): Number of bits
ch (channel): Number of channels
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: DutchSVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: JapaneseCHI: Chinese
KOR: Korean
MAL: Malay
VIE: Vietnamese
THA: Thai
¢: Others
7303en.book  30 ページ  ２００４年５月３１日　月曜日　午前９時３２分