Panasonic Dmr E20 Operating Instructions Manual

							21
RQT6035
Getting started
Selecting TV screen
type
The aspect ratio is factory set to 4:3 for a regular television. You do
not have to change this setting if you have a regular 4:3 aspect tele-
vision.
Preparation
Turn on the television and select the appropriate video input to suit
the connections to this unit.
Switch [DVD, TV] to “DVD”.
1Press [, POWER] to turn this unit
on.
2Press [ACTION] to show the menus.
3Use the joystick [, ] to select the
TV Screen tab.
4Use the joystick [
, ] to select
“TV Aspect” and press [ENTER].
5Use the joystick [
, ] to select the
TV aspect and press [ENTER].
4:3 (factory setting)
16:9
To return to the previous screenPress [RETURN].
To end the settingPress [ACTION].
For your reference
Apart from “TV Aspect”, other settings also affect how video ap-
pears on your television. Check the following if video doesn’t appear
correctly on your television.
“ACTION—TV Screen—4:3 TV Settings for DVD-Video” or “4:3
TV Settings for DVD-RAM” (➡ page 83).
The video setting on the disc. How video appears is often specified
by the disc itself.
The video settings on your television.
!?
1
2
4·5
3
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V. S . S .
ACTION
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
S TAT U S
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
POWER
ACTION
ENTERENTER
ENTER
DVD,TV
1
RETURN
TV DV D
2 3·4·5
Set Up
TA B SELECT
Off TimerRemote Control CodeClock SettingsChannel Settings
Re-initialize Setting6 hr
Set Code 1
ACTION
ENTER    RETURN
ENTER    RETURN
4:3 TV Settings for DVD-RAMLetterbox Pan&Scan4:3 TV Settings for DVD-Video
TV Screen
4:3 TV Aspect
ACTION
SELECTTA B
ENTER    RETURN
ACTION
SELECT
4:3
TV Aspect
16:9
TOP 
						

							RQT6035
22
Basic operations
1
2
3
POWER
/I
PLAY
POWER
OPEN/CLOSEOPEN/CLOSE
ASTOP
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V.S.S.
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
STATUS
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
∫, STOP
∫
;, PAUSE ;
DVD,TV
1 12
3
2
3
Playing discs

 
 



Preparation
Switch [DVD, TV] to “DVD”.
1Press [, POWER] to turn the unit on.
2Press [	, OPEN/CLOSE] to open the
tray and insert a disc.
Insert inside the tray’s guides.
Insert one disc only.
3Press [, PLAY].The disc tray closes and play begins.
(The unit takes some time to read the disc before play starts.)
To stop play 
Press [, STOP] (When “PLAY” flashes ➡ page 23, Starting play
from where you stopped it).
The screen saver at right may appear
when you stop play. Press [, STOP]
again and you can use this unit’s tuner to
watch television.
This screen is also shown when you are
playing CDs.
To pause playPress [
, PAUSE].
Press again to restart play.
Auto power-off
The unit switches to standby after about 6 hours in the stop mode.
You can turn this feature off or change the time to 2 hours
(➡ page 82, ACTION—Set Up—Off Timer).
With non-cartridge discs
Insert label-up with the arrow
facing in.
(With double-sided discs, load
so the label for the side you
want to play is facing up.)
e.g.: DVD-RAMGuide for 8 cm
(3) disc Guide for 12 cm
(5) disc Insert label-up. (With double-sided discs, load
so the label for the side you want to play is facing up.) or or
or
or
TOP
!?
!? 
						

							23
RQT6035
Basic operations
1
2
A
B
STOP
PLAY
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V.S.S.
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSEPLAY
SLOW/SEARCH
STATUS
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
MENU TOP MENU
RETURN
LAST
MARKER
12
123
456
789
0
ENTERENTER
Playing discs
When a menu screen appears on theAtelevision



Operate menus with the following operations. Actual operations de-
pend on the disc.
Press the numbered buttons to select an item (➡ page 8), or
move the joystick [
, , , ] to select an item and press
[ENTER].
You can return to menus after you start play by
pressing [TOP MENU] or [MENU] (DVD-Video),
or [RETURN] (Video CD).
Note
Discs continue to rotate while menus are displayed. Press
[, STOP] when you have finished viewing to preserve the unit’s
motor and your television screen.
Volume may be lower when playing DVD-Video than when playing
other discs or during television broadcasts.
If you turn the volume up on the television or amplifier, ensure you
reduce the volume again before playing other sources or returning
to the television so that a sudden increase in output does not
occur.
For your reference
If “
” appears on the television
The operation is prohibited by the unit or disc.
If a disc is loaded, the unit will come on and play will start when
you press [, PLAY].
If you play a disc with video and then replace it with an audio-only
disc, the video from the previous disc may continue to be shown
on the television.
BStarting play from where you
stopped it (Resume Function)

 
 



1During play
Press [, STOP].The unit remembers the position.
2Press [, PLAY] while “PLAY” is
flashing on the display.
Play starts from where you stopped it.
To cancel the resume function
Press [, STOP] until “PLAY” goes out.
(The position is also cleared when you turn the unit off.)
To start play from a memorized position after
turning the unit off
Press [LAST MARKER] during play.
(The message “Position Memorized” appears on the television.)
Now when you press [, PLAY] after switching the unit to standby
and back on, play starts from the memorized position.
For your reference
If you press [, STOP] before switching the unit to standby after
pressing [LAST MARKER] to memorize a position, play will
resume from the position you pressed [, STOP] when you press
[, PLAY].
The position memorized when you press [, STOP] is cleared
when you switch the unit to standby or if the unit switches to stand-
by automatically (➡ page 82, ACTION—Set Up—Off Timer).

 



The position is memorized when you press [, STOP] or
[LAST MARKER] and cleared when you open the disc tray.


The last marker is written to the disc and remains intact until you
mark a different position.
You cannot mark positions if the disc is write-protected with DISC
SETTING (➡ page 52) or with the write-protect tab (➡ page 99).
Release the protection before marking another position. Joystick
Numbered
buttons
or
TOP
TOP!? 
						

							RQT6035
24
Basic operations
Playing discs
AFast forward and rewind—SEARCH

 
 



During play
Press [
, SLOW/SEARCH] or [,
SLOW/SEARCH].
[
]: backward
[]: forward
There are five search speeds. Each press increases the search
speed.
The search speed is maintained when you release the button.
Press [, PLAY] to restart play.
Audio is output during search with most discs, but only at forward
speed one with DVD-RAM (except during chasing play and simul-
taneous rec and play), DVD-R, DVD-Video, and Video CDs. You
can turn off the audio during search for DVD-RAM, DVD-R,
DVD-Video, and Video CDs (➡ page 83, ACTION—Audio—Audio
during Search).
BSlow-motion play

 
 


While paused
Press [
, SLOW/SEARCH] or [,
SLOW/SEARCH].
[
]: backward (does not work with Video CDs)
[]: forward
There are five slow-motion speeds. Each press increases the
slow-motion speed.
The slow-motion speed is maintained when you release the but-
ton.
Press [, PLAY] to restart play.
CFrame-by-frame viewing

 
 


Remote control only
While paused
Press [
, FRAME] or [
, FRAME].[
]: backward (does not work with Video CDs)
[
]: forward
Each press shows the next frame.
Press [, PLAY] to restart play.
A
B
C
SLOW/SEARCH
SLOW/SEARCH
FRAME
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V.S.S.
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSEPLAY
SLOW/SEARCH
S TAT U S
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 10 0
100XL R
DVD-RAM
6, 5, 6, 5
1, PLAY 1
, , 
FRAME
SLOW/SEARCH
or or
Search speed 
						

							25
RQT6035
Basic operations
A
B
SKIP
[:]
[9]
[:]
[9]
123
456
789
0
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V.S.S.
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
S TAT U S
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
:, 9,:, 9
DVD, TV
SKIP
Playing discs
ASkipping

 
 



You can skip to the beginning of tracks (CD and Video CD
➡ page 97) and chapters (DVD-Video ➡ page 97) and restart play
from there.
On DVD-RAM and DVD-R, you can skip to the start of a program or
to a marker and start play from there.
During play or while paused
Press [, SKIP] or [, SKIP].
[]: backward
[]: forward
Each press increases the number of skips.
For your reference
After skipping, the unit returns to the previous state, play or pause.
Pressing [] or [] while the playback control feature on
Video CDs (➡ page 97) is working may take you to a menu screen.
You can also mark positions to skip to (➡ page 36).
BStarting play from a selected
program, title, chapter, or track

 
 



Remote control only
Preparation
Switch [DVD, TV] to “DVD”.
During play or while stopped
Press the numbered buttons to select the
item.
For example, to enter 5, press [0] and [5].
To enter 15, press [1] and [5].
This works only when stopped with some discs (the screen saver is
on the television). Play position
Twice Once Once Twice
Play positionMarker
Twice Once Once Twice
The program beforeThe program after Current program
Three times Numbered
buttons
or
Chapter/track Chapter/trackChapter/track 




 
 
						

							RQT6035
26
Basic operations
1
2
3
4
5
OPEN/CLOSE
CHDVD
REC MODE
POWER
/I
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V.S.S.
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSEPLAY
SLOW/SEARCH
STATUS
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
TV
POWER
OPEN/CLOSE
CH
REC MODE
RECREC
TV,    ,    , CHTV, TV/AV
3 52
;, PAUSE∫, STOP
1
435 2∫;1
4DVD, TV
Recording television
programs

 

Preparation
Switch [DVD, TV] to “DVD”.
Use a disc that the unit can record to (➡ page 6) and that has
enough space available.
Ensure the disc is not write-protected with the write-protect tab
(➡ page 99).
Ensure the disc is not write-protected with DISC SETTING
(➡ page 52).
1Press [, POWER] to turn the unit on.
2Press [	, OPEN/CLOSE] to open the
tray and insert a disc.
Insert one disc only within the tray’s guides.
Press [	, OPEN/CLOSE] to close the tray.
When using a DVD-RAM for the first time with this unit, for-
mat it to ensure accurate recording (➡ page 54, “Format”).
Check the disc carefully to ensure it doesn’t contain pro-
grams you want to keep.
3Press [
, , , CH] to select the
channel.
4Press [REC MODE] to select the
recording mode.
Select “XP”, “SP”, “LP”, or “EP” (➡ see below).
5Press [, REC] to start recording.The program is recorded into the available space on the
disc.
To pause recording
Press [
, PAUSE].
Press again to restart recording.
To stop recordingPress [, STOP].
To select channels with the numbered buttonsWhen “TV” is the antenna system: between 2 and 69
When “CATV” is the antenna system: between 1 and 125
Press the numbered buttons.
For example: Channel 5, press 0 ➡ 5
Channel 15, press 1 ➡ 5
Channel 115, press 100 ➡ 1 ➡ 5
Convenient featuresChasing play—playing from the beginning of the program you are
recording (➡ page 28)
Simultaneous rec and play—watching a program you recorded
while recording another (➡ page 28)
Time Slip—checking the images you are recording (➡ page 29).
Recording modes
For example, approximate recording times with a 4.7-GB
DVD-RAM
XP:1 hour, high picture quality
SP:2 hours, standard picture quality
LP:4 hours, long play
EP:6 hours, extra long play
Watching the television while recording
Switch [DVD, TV] to “TV”.
Press [
, TV/AV] to change the input mode to “TV”.
Press [
, , , CH] to change channels.
You can also select the channel with the numbered buttons
(➡ page 8).
For your reference
You can also do this during timer recording.
The recording is unaffected. Numbered
buttons
or
or
or
ore.g.: When you have selected
channel 4
e.g.: When you have selected “XP”
or
!?Insert label-up with the arrow
facing in. (With double-sided
discs, load so the label for
the side you want to record
is facing up.) 
						

							27
RQT6035
Basic operations
TOP
WINDOWENTERRETURN
REC
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V.S.S.
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
STATUS
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
∫
∫
, STOP
¥, REC
STATUS
REC
C
A
B
REC  0:30
CH 10
Stereo
DVD-RAMSTATUS
STATUS
¥,  REC
Remain      0 :30   SP
6/8    10 : 15    PMREC
L R
DVD-RAM
PRG4CH 20:30.00 SP
Recording television programs
Re-inserting double-sided discs
To check the remaining time and the current
mode during recording 

Press [STATUS] several times.
For your reference
You can record up to 99 programs on one disc.
You cannot change the channel or recording mode during record-
ing. You can change them while recording is paused, but the mate-
rial is recorded as a separate program.
An error message appears if you try to start recording when a disc
is full; the remaining time will be shown as “0:00”. To continue re-
cording, erase unneeded programs (DVD-RAM only ➡ page 58,
Erasing programs) or use another disc.
There are limitations when recording to DVD-R (➡ page 7).
The message “Could not write to disc.” is displayed when record-
ing was not completed correctly. Check the discs for dirt or
scratches.
BOne Touch Recording—
Specify a time to stop recording

 

This is a simple way of timer recording when you are in a hurry or
before you go to bed. You can set the time up to 4 hours in advance.
While recording
Press [, REC] to select the recording
time.
The time increases as illustrated each time you press the button.
After selecting the time the display updates indicating the time re-
maining until the unit stops recording. You can change the time
again with the same operation.
When the time you set is reached, recording stops and the unit
switches to standby.
To cancelDuring recording, press [, REC] until the counter appears.
Recording continues.
To show the time remaining until recording fin-
ishes 

Press [STATUS].
For your reference
This does not work during timer recordings.
Recording stops and the set time is cleared if you press
[, STOP].
The set time is cleared if you pause recording and cause another
program to be recorded (for example, change the recording mode
or channel). Counter
The time remaining until recording finishes changes each
time you press the button.or
Shows recording
will stop in
30 minutes
123
Turn over
You can get up to 12 hours
recording when you use
double-sided discs and use
the “EP” mode.FrontReverse
Available recording time
Recording mode 
						

							RQT6035
28
Advanced operations
A
1
2
B
PLAY
TOPMENU
TCERIDROTAGIVAN
ENTERENTER
3
3
1
1
1
1
1
DIRECT NAVIGATOR
No DATECH TIME EDITTITLE
3
3
ENTER
RETURN0   ~   9No TOTAL 2SELECT
14Dinosaur2¥6/20 WED6  900 PMSoccer1
1
1
1
16/20 WED1000 AM

DIRECT NAVIGATOR
No DATE TIME EDITTITLE
ENTER
RETURN0   ~   9No TOTAL 2SELECT
2¥6/20 WED6  900 PMSoccer6/20 WED1000 AM

14DinosaurCH
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V.S.S.
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSEPLAY
SLOW/SEARCH
STATUS
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
DVD, TV
∫, STOP1, PLAY
1
2
POWER
Í 
Playing while you are
recording
A
Playing from the beginning of the
program you are recording—
Chasing play


You can start play from the beginning of a program while continuing
to record it.
Preparation
Switch [DVD, TV] to “DVD”.
During recording or timer recording
Press [, PLAY].Play starts from the beginning of the program being recorded.
To stop play and recording

Press [, STOP]. Play stops.
Wait 2 seconds.
Press [, STOP]. Recording stops.
You cannot stop recording with [, STOP] during timer recording.
To stop timer recording, press [, POWER], then [, STOP] with-
in 5 seconds.
For your reference
The playback images are displayed during chasing play.
Sound is not output while fast-forwarding.
Play cannot be started until at least 2 seconds after recording
starts.
If you fast-forward and get to within a few seconds of the part being
recorded, the picture will change to show the images currently be-
ing played.
BSimultaneous rec and play


You can start play of the program you are recording or play a pro-
gram previously recorded.
Preparation
Switch [DVD, TV] to “DVD”.
During recording or timer recording
1Press [TOP MENU, DIRECT NAVI-
GATOR].
“” is displayed in the direct navigator to indicate the pro-
gram is being recorded (➡ page 57).
2Use the joystick [
, ] to select a
program and press [ENTER].
To stop play and recording
Press [, STOP]. Play stops.
Wait 2 seconds.
Press [, STOP]. Recording stops.
You cannot stop recording with [, STOP] during timer recording.
To stop timer recording, press [, POWER], then [, STOP] with-
in 5 seconds.
For your reference
During simultaneous rec and play, you cannot edit with the direct
navigator or use play lists.
If you start play while the unit is on timer recording standby, re-
cording starts when the time you set is reached.
The unit returns to recording standby when you stop play while it is
on timer recording standby. For example:
while recording program 2 (sport)
You want to watch the movie
you recorded yesterday
(program 1) You are recording a sports
program (2) and you want to
watch it from the beginning.
A sports program is
recorded while you watch a
movie. The same sports program is
recorded while you are
watching it.
Do the above operation and… Do the above operation and… For example:
while recording program 2 (sport) 
						

							29
RQT6035
Advanced operations
A
TIME SLIP
TOP
WINDOWENTERRETURN
TIME SLIP∫
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIPCM SKIP
V. S . S .
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
STATUS
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 10 0
TV
TIME SLIP
DVD, TV
TIME SLIP
12
Í/ I , POWER
∫
, STOP
POWER
Í 
Playing while you are recording
Reviewing the recorded images
while recording (Time Slip)


You can play the program being recorded to check that it is being
recorded correctly. You can also check parts that were recorded
previously.
Preparation
Switch [DVD, TV] to “DVD”.
While recording or timer recording
Press [TIME SLIP].Play starts from 30 seconds previous.
The play images are shown for 5 seconds as a picture-in-picture
with the recording images, then they are shown in full.
To continue to show both the recording and play
images
Press and hold [TIME SLIP] for about 3 seconds.
To change the part being played 
Main unit only

Turn [TIME SLIP] on the main unit.
Turn down to increase in one-minute units.
Turn up to decrease in one-minute units.
Press [TIME SLIP] on the main unit within 5 seconds to enter the
time.
Play starts from the time you entered.
Note
You cannot change the position being played with the remote
control.
To stop play and recording
Press [, STOP]. Play stops.
Wait 2 seconds.
Press [, STOP]. Recording stops.
You cannot stop recording with [, STOP] during timer recording.
To stop timer recording, press [, POWER], then [, STOP] with-
in 5 seconds.
For your reference
If you fast-forward, rewind, or skip during Time Slip, only the play
images are shown.
The sound for the images being played is heard during Time Slip.
The length of the recording determines the amount of time you can
select for time slip. As the recording progresses, the amount of
time you can time slip also increases. Current recording
Play images
(30 seconds
before) or 
						

							30
RQT6035
Advanced operations
1
2
3
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V.S.S.
ACTION
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
STATUS
RETURN
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
ENTER
TOP WINDOW
ENTER
ENTER
TV DV DDVD, TV
12·3RETURN
Using the top window
About the top window
Most of the features and functions of this unit can also be controlled
with icons. The examples show the top window when a DVD-RAM is
being used. Actual menus depend on the type of disc being used.
Using the top window

 
 



Preparation
Switch [DVD, TV] to “DVD”.
1While stopped
Press [TOP WINDOW] to show the top
window.
2Use the joystick [
, , , ] to se-
lect an item.
Refer to the relevant pages for details.
3Press [ENTER].
Your selection is entered and the top window disappears. If
the operation requires further selections, another screen
appears.
To clear the top windowPress [TOP WINDOW] or [RETURN].
DVD-RAM        MY SELECTION
DISC PROTECTION OFF 
CARTRIDGE PROTECT OFF
TimeDateCH
N
S
TOP
WINDOW
ACTION
TIMER RECORDINGRESUME PLAYPLAY LIST
PLAY
CREATE PLAY LISTDIRECT NAVIGATORDISC SETTING
RETURN ENTER
SELECT
N
S
DVD-RAM        MY SELECTION
DISC PROTECTION OFF 
CARTRIDGE PROTECT OFF
TimeDateCH
N
S
TOP
WINDOW
ACTION
TIMER RECORDINGRESUME PLAYPLAY LIST
PLAY
CREATE PLAY LISTDIRECT NAVIGATORDISC SETTING
RETURN ENTERSELECT
N
S
Disc protection
“ON” is displayed if you have used Disc Protection
in DISC SETTING to protect the disc (➡ page 52).
Disc title
The disc’s title is displayed if one is recorded. You
can enter titles with Enter Title in DISC SETTING
(➡ page 50).Cartridge protection
“ON” is displayed if the disc is protected
with the write-protect tab (➡ page 99).
Disc type