Panasonic Dmp Ub900 Owners Manual

Reference
31TQBA2018
¾BD-Video Secondary Audio
Select whether or not to mix the primary and 
secondary audio (including the button click 
sound).
If “Off” is selected, the unit outputs the primary 
audio only.
	≥ To enjoy BD-Video that supports Dolby Atmos® or 
DTS:XTMConnect this unit to an AV amplifier or similar device that 
supports it with an HDMI cable, and select the following 
settings:
– Dolby D/Dolby D +/Dolby TrueHD: “Bitstream”
– DTS/DTS-HD: “Bitstream”
– BD-Video Secondary Audio: “Off”
Dolby...

32TQBA2018
∫Audio Language
Choose the language for audio.
≥ If “Original” is selected, the original language of 
each disc will be selected.
≥ When the selected language is not recorded on 
the disc, or depending on how the navigation is 
created on the disc, it may playback in a 
different language than the selected language.
≥ Enter a code ( >42) when you select “Other 
¢¢¢¢ ”.
∫Subtitle Language
Choose the language for the subtitle.
≥ When “Auto” is selected, a subtitle for the 
language selected in...

Reference
33TQBA2018
¾IP Address/DNS Settings
This is for checking the state of the network 
connection and setting the IP address and 
DNS-related.
Press [OK] to show the respective setting.
¾ Proxy Server Settings
This is for checking the state of connection with 
the Proxy server and performing settings.
Press [OK] to show the respective setting.
¾ Network Service Settings ( >22)
Press [OK] to show the following settings:
Second Screen Browsing
When this function is set to “On”, you can 
enjoy the...

34TQBA2018
∫Easy Setting
You can execute basic settings.
∫ Display Settings
Press [OK] to show the following settings:
¾ Screen Saver Function
This is to prevent image retention on the 
screen.
≥ When this is set to “On”:
If a list of playback content is displayed and 
there is no operation for 5 minutes or more, 
the screen switches to HOME menu 
automatically.
≥ While playing and pausing, etc., this function 
is not available.
¾Status Messages
Choose whether to show status messages 
automatically.
¾...

Reference
35TQBA2018
Troubleshooting guide
Before requesting service, please perform the 
following checks.
The following do not indicate a problem with 
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
∫Unit does not respond to remote 
control or unit’s buttons.
Touch and hold [ Í/I] on the main unit for 
3 seconds.
– If still unable to turn the unit off, disconnect the  AC power supply cord, wait 1 minute, then 
reconnect the AC...

36TQBA2018
You have forgotten your ratings password.
You want to cancel the ratings level.
¾The ratings level returns to the factory 
defaults.
1 While the unit is on
Press and hold [OK], the yellow button and 
the blue button on the remote control at the 
same time for more than 5 seconds.*
– “00 RET” is displayed on the unit’s display.
2 Press [ 1] (right) repeatedly on the remote 
control until “03 VL” is displayed on the unit’s 
display.
3 Press [OK].
* Perform this operation when the light on the...

Reference
37TQBA2018
Video is not output.
¾Video is not output when the “High Clarity 
Sound” is set to “On (Video Off)”. ( >28)
¾ Video from the HDMI AUDIO OUT terminal is 
not output when the “HDMI(AUDIO) Output 
Mode” is set to “Audio Only”. ( >29)
Video is not output in 4K or high-definition.
¾ Confirm that “Resolution” in the Setup menu 
is set properly. ( >29)
¾ Confirm the HDMI cable, related connections 
and the compatibility of TV video input.
To output images in 4K, connect the HDMI 
cable to a...

38TQBA2018
There is no sound coming out.
¾To output audio using DIGITAL AUDIO OUT 
terminal, set “OPTICAL / COAXIAL Down 
Sampling” properly. ( >31)
¾ Refer to “Connecting to an amplifier/receiver” 
(>11 - 15) to check the audio output settings 
suited to the connections of your device.
In the following cases, audio is not output 
from the terminals listed below:
≥ HDMI VIDEO OUT terminal
– When a device is connected to the HDMI 
AUDIO OUT terminal and “HDMI(VIDEO) 
Output Mode” is set to “Auto ( Video...

Reference
39TQBA2018
When using wireless LAN connection, video 
from the DLNA Certified media server is not 
played back or video frames are dropped 
during playback.
¾
Higher transfer rate router such as 802.11ac or 
11n (2.4 GHz or 5 GHz) wireless router may 
solve the problem. If you use 802.11ac or 11n 
(2.4 GHz or 5 GHz) wireless router, it is 
necessary to set the encryption type to “AES”.
Simultaneous use with a microwave, cordless 
telephone etc. at 2.4 GHz may result in 
connection interruptions...

40TQBA2018
Specifications
≥Specifications are subject to change without notice.
General
Signal system NTSC
Operating temperature 
rangei5
oC to i35 oC
(i41 oF to i95oF)
Operating humidity 
range  10 % to 80 % RH 
(no condensation)
AUDIO OUT (Pin jack) Analog Audio output (L/R, 
7.1ch):
Standard : 0.5 Vrms,
Full scale : 2.0 Vrms at 1 kHz 
(