Panasonic Dmp Dsb100 Owners Manual

Settings
21VQT4M33
∫Video
The recording method of original video appears.
∫ Primary Video
The recording method of original primary video 
appears.
∫ Secondary Video
∫To p  M e n u
Display Top Menu.
∫ Pop-up Menu
Display Pop-up Menu.
∫ Menu
Display Menu.
∫ Picture Mode 
Select the picture quality mode during play.
≥ If you select “User”, you can change settings in 
“Picture Adjustment”. 
∫ Picture Adjustment 
Specific picture quality settings can be performed.
∫ Progressive
Select the method of conversion...

22VQT4M33
Setup menu
Change the unit’s settings if necessary. The settings 
remain intact even if you switch the unit to standby.
Some items in the Setup menu are common to 
the Option menu. You can get the same effect 
with both menus.
About Multi User Mode : Settings of the items with this indication are 
saved by the respective users registered in the 
Home menu. 
Please refer to page 14 for details about user 
registration and switching.
1While displaying the HOME menu, press 
[SETTINGS].
2Select an...

Settings
23VQT4M33
¾HDMI Audio Output
This setting selects whether or not to output 
audio from HDMI.
∫ Downmix
Select the downmix system of multi-channel to 
2-channel sound.
≥Select “Surround encoded”, when the connected 
equipment supports the virtual surround function.
≥ There is no effect on “Bitstream” via HDMI AV 
OUT.
≥ The audio will be output in “Stereo” in the 
following cases:
– AVCHD playback
– Playback of secondary audio (including the 
button click sound).
∫ Audio Language
Choose the...

24VQT4M33
¾Network Drive Connection
It is possible to access the shared folder of 
equipment not compatible with DLNA, such as 
the Windows XP operating system, and play 
back video, still pictures, and music on this unit.
For the setting and operation method of connected 
equipment, refer to the following Website. 
http://panasonic.jp/support/global/cs/
(This site is in English only.)
¾ Remote Device Settings ( >18)
Press [OK] to show the following settings:
Remote Device Operation
Enable to operate by...

Settings
25VQT4M33
¾Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to “On”:
If a list of playback content is displayed and 
there is no operation for 10 minutes or more, 
the screen switches to HOME menu 
automatically.
≥ While playing and pausing, etc., this function 
is not available.
¾Status Messages
Choose whether to show status messages 
automatically.
¾ HDMI CEC
Set to use “HDMI CEC” function when 
connected via HDMI cable to a device that 
supports “HDMI CEC”.
≥...

26VQT4M33
ReferenceTroubleshooting guide
Before requesting service, please perform the 
following steps.
The following do not indicate a problem with 
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
∫Unit doesn’t respond to remote 
control or front panel buttons.
Disconnect the power cord, wait 1 minute, then 
reconnect the power cord.
∫Cannot eject disc.
The unit may have a problem.
1 While the unit is on, press and hold [OK], [B] 
and [Y] on the remote control at the same...

Reference
27VQT4M33
This unit does not recognize the USB 
connection correctly.
¾Disconnect and reconnect the USB cable. If it 
still does not recognize the connection, turn 
the power of this unit off and on again.
¾ USB devices may not be recognized by this 
unit when connected using the following :
– a USB hub
– a USB extension cable other than the 
supplied with the Wireless LAN Adaptor 
DY-WL5 (optional)
¾ If you connect USB HDD to this unit, use the 
USB cable that is supplied with the HDD.
The...

28VQT4M33
Cannot hear the desired audio type.
¾Check the connections and the “Digital Audio 
Output” settings. ( >7, 22)
¾ To output audio from a device connected with 
an HDMI cable, set “HDMI Audio Output” to 
“On” in the Setup menu. ( >23)
Disc cannot be played.
¾ The disc is dirty. ( >3)
Still pictures (JPEG) do not play back 
normally.
¾ The images that were edited on the PC, such 
as Progressive JPEG, etc., may not be played 
back.
I can’t play back BD-Live.
¾Confirm that this unit is connected to...

Reference
29VQT4M33
Messages
The following messages or service numbers 
appear on the television or unit’s display.
Cannot play.
¾You inserted an incompatible disc (Discs 
recorded in PAL video, etc.).
Cannot display on this unit.
¾You tried to play a non-compatible image.
No disc inserted.
¾The disc may be upside down.
$ This operation is not available.
¾ Some operations are unsupported by the unit. 
For example;
– During playback, reverse slow-motion or 
reverse frame-by-frame is not possible.
IP...

30VQT4M33
Supplemental 
infor mation
∫Display languages list
∫ Language code list ∫
Unit’s display list
This list only contains displays that are difficult to 
read.
*“  ” stands for a number.
∫Support format of DLNA client
File formats that are not supported by your DLNA 
server cannot be played. 
Video
Photo
Audio
DisplayLanguageDisplayLanguageDisplayLanguage
LanguageCodeLanguageCodeLanguageCode
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian...