Panasonic Dmp Dsb100 Owners Manual

							VQT4M33
Owner’s Manual
(Detailed Information)
Blu-ray DiscTM Player
Model No. DMP-DSB100
Thank you for purchasing this product.
For optimum performance and safety, please carefully read this manual, “Quick Start Guide”, and 
“Owner’s Manual (Essential Information)”.
P 
						

							2VQT4M33
Table of contents
Getting started
Unit and media care . . . . . . . . . . . . . . . . . . . . 3
Playable media  . . . . . . . . . . . . . . . . . . . . . . . 4
Control reference guide . . . . . . . . . . . . . . . . . 6
Connections & Settings
STEP 1 : Connecting to a TV . . . . . . . . . . . . . 7
STEP 2 : Connecting to an amplifier/receiver  . . . . . . . . . . . . . . 7
STEP 3 : Connecting to the network  . . . . . . . 8
STEP 4 : Connecting to an 
AC power source  . . . . . . . . . . . . . . 9
STEP 5 : Settings. . . . . . . . . . . . . . . . . . . . . 10
Playback
Inserting or removing media  . . . . . . . . . . . . 13
HOME menu  . . . . . . . . . . . . . . . . . . . . . . . . 13
Multi User Mode . . . . . . . . . . . . . . . . . . . . . . 14
Playback  . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Network Service
(Enjoying NETFLIX, etc.) . . . . . . . . . . . . . . 17
Home Network feature . . . . . . . . . . . . . . . . . 18
“HDMI CEC” . . . . . . . . . . . . . . . . . . . . . . . . . 19
Settings
Option menu  . . . . . . . . . . . . . . . . . . . . . . . . 20
Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . 22
Reference
Troubleshooting guide . . . . . . . . . . . . . . . . . 26
Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Supplemental information  . . . . . . . . . . . . . . 30
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 31
≥ About Firmware updates (>12) 
						

							Getting started
Connections & Settings
Playback
Settings
Reference
3VQT4M33
Getting startedUnit and media care
∫Clean this unit with a soft, dr y 
cloth
≥Never use alcohol, paint thinner or benzine to 
clean this unit.
≥ Before using chemically treated cloth, carefully 
read the instructions that came with the cloth.
∫ This unit’s lens
Use the lens cleaner (not supplied) to clean the 
unit’s lens.
∫Clean discs
Wipe with a damp cloth and then wipe dry.
∫Disc handling precautions
≥Handle discs by the edges to avoid inadvertent 
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use disc cleaning sprays, benzine, 
thinner, static electricity prevention liquids or 
any other solvent.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed 
stickers or labels (rented discs, etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart  shapes.
∫ To dispose or transfer this unit
The unit may keep the user settings information in 
the unit. If you discard this unit either by disposal 
or transfer, then follow the procedure to return all 
the settings to the factory presets to delete the 
user settings. ( >26, “To return all settings to the 
factory preset.”)
≥ The operation history may be recorded in the 
memory of this unit.
DO  DO NOT 
						

							4VQT4M33
Playable media
≥See pages 5 and 31 for more information on the types of content that can be played.
TypeLogo examplesType detailPlayable contents
BD-Video Video
BD-RE Video, JPEG
BD-R Video, MKV
DVD-Video Video
DVD-R Video, AVCHD
MKV, JPEG, FLAC, 
MP3, WAV
DVD-R DL
DVD-RW Video, AVCHD
— +R/+RW/+R DL
Music CD Music [CD-DA]
— CD-R
CD-RW MKV, JPEG, 
FLAC, MP3, 
Music [CD-DA], WAV
—
USB devices
(up to 2 TB) MP4, MPEG, MKV, 
JPEG, FLAC, 
MP3, WAV
BD
DVD
CD
USB 
						

							Getting started
5VQT4M33
∫Discs that cannot be played in 
this unit
Any other disc that is not specifically 
supported or previously described.
≥DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ All types of DivX discs
≥ PAL discs
≥ HD DVD
≥BD-Video discs recorded at a rate of 50 fields/sec
∫ Region management information
BD-Video
This unit can play BD-Video discs supporting the 
region code  “A”.
DVD-Video
This unit can play DVD-Video discs supporting 
the region number  “1” or “ALL” .
∫Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW 
recorded by a recorder, etc. needs to be finalized 
by the recorder to play on this unit. Please refer to 
the recorder’s instructions.
∫BD-Video
≥This unit supports high bit rate audio (Dolby® 
Digital Plus, Dolby® TrueHD, DTS-HD High 
Resolution Audio and DTS-HD Master Audio) 
adopted in BD-Video.
≥ If “Dolby D/Dolby D +/Dolby TrueHD” is set to 
“PCM”, the maximum possible number of Dolby 
sound is 2ch PCM.  (> 22)
∫Music CD
≥Operation and sound quality of CDs that do not 
conform to CD-DA specifications (copy control 
CDs, etc.) cannot be guaranteed.
≥ The digital audio content side of a DualDisc 
does not meet the technical specifications of 
the Compact Disc Digital Audio (CD-DA) format 
so playback may not be possible.
∫ USB device
≥This unit does not guarantee connection with all 
USB devices.
≥This unit does not support USB device charging.
≥FAT12, FAT16, FAT32 and NTFS file systems 
are supported.
≥ This unit supports USB2.0 High Speed.
≥ This unit supports an HDD formatted in FAT32 
and NTFS. If the HDD is not recognized the 
power to the HDD may not be supplied. Supply 
power from an external source.
	≥ It may not be possible to play the above media in some 
cases due to the type of media, the condition of the 
recording, the recording method and how the files were 
created.
≥ The producers of the disc can control how discs are 
played, so you may not always be able to control play as 
described in this Owner’s Manual. Read the disc’s 
instructions carefully.
Example:
2
4
1ALL1
Example: 
						

							6VQT4M33
Control reference guide
1 Turn the unit on and off
2 TV operation buttonsYou can operate the Panasonic TV through 
the unit’s remote control (Depending on the 
TV these buttons may not work.).
[ÍTV] : Turn the television on and off
[AV]  : Switch the input select
[ ij VOL]  : Adjust the volume
3 Select title numbers, etc./Enter numbers
4 Cancel
5 Select audio ( >15)
6 Basic playback control buttons ( >15)
7 Show status messages ( >16)
8 Show Pop-up menu/Top menu ( >16)
9 Show Option menu ( >20)
10 Colored buttons  Used for various purposes depending on the 
display.
11 Transmit the remote control signal
12 Open or close the disc tray ( >13)
13 Show NETFLIX screen ( >17)
14 Switch on/off Secondary Video  (Picture-in-picture) ( >21)
15 Show Setup menu ( >22)
16 Exit the menu screen
17 Show the selection screen of network  features ( >17)
18 Show HOME menu ( >13)
19 [ 3,4,2, 1] : 
Move the highlight for selection[OK] : Confirm the selection
(;1 ) : Frame-by-frame ( >15)
20 Return to previous screen
1 Standby/on switch ( Í/I)  (> 10)
Press to switch the unit from on to standby 
mode or vice versa. In standby mode, the unit 
is still consuming a small amount of power.
2 Disc tray ( >13)
3 USB port ( >8,13)
4 Display  (> 30) 5 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20 e up and down, 30e left and 
right
6 Stop ( >15)
7 Start play (> 15)
8 Open or close the disc tray ( >13)
Rear panel terminals ( >7–9)
1
2
3
6
45
7
8
19
10 9
20 18
16
15
17
14 13
12
11
18
234675 
						

							7VQT4M33
Getting started
Connections & Settings
Co nnections & SettingsSTEP 1 : Connecting to a TV
Perform either one of the following connections in accordance with your TV input terminal.
≥ Before making any connections, we recommend that y ou temporarily disconnect all the units from AC 
power.
≥ Do not connect video signals through a video recorder. Due to copy guard protection the picture may 
not be displayed properly.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant  cables cannot be utilized. It is recommended 
that you use Panasonic’s HDMI cable. When  outputting 1080p signal, please use HDMI cables 5.0 
meters (16.4 ft.) or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.
≥ Connect terminals of the same color.
STEP 2 : Connecting to an amplifier/receiver
≥Set “Digital Audio Output” ( >22).
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)” 
(non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is 
also required to connect the amplifier/receiver and TV using an optical digital cable.
HDMI AV OUT (High quality)
VIDEO OUT (Standard quality)
HDMI IN
HDMI cable
VIDEO IN
AUDIO IN
L
R
Audio/Video cable
HDMI IN
(ARC)HDMI OUT (ARC)HDMI IN
Amplifier/receiver
HDMI cable
HDMI cable 
						

							8VQT4M33
STEP 3 : Connecting to the network
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated  (> 12)
≥ You can enjoy BD-Live ( >16)
≥ You can enjoy Network Service ( >17)
≥ You can access other devices (Home Network) ( >18)
For details about connection method, refer to the instructions supplied with the connected equipment.
For wireless capability, connect the Wireless LAN Adaptor DY-WL5 (optional).  Only 
DY-WL5 can be 
used.  Read the operating instructions for DY-WL5 thoroughly when using it.
≥ For up-to-date compatibility information on your wireless router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
For additional information about this unit refer to 
http://www.panasonic.com/consumer/support
≥ The unit is not compatible with public wireless LAN  services provided in airports, stations, cafes, etc.
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cabl e in the LAN terminal can damage the unit.
Wireless LAN connection
LAN cable connection
Wireless router, etc.Internet
LAN Cable
Internet
Broadband router, etc. 
						

							Connections & Settings
9VQT4M33
STEP 4 : Connecting to an AC power source
≥This unit consumes a small amount of AC power ( >31) even when turned off. In the interest of 
power conservation, if you will not be using this  unit for an extended period of time, it can be 
disconnected.
To a household AC outlet 
						

							10VQT4M33
STEP 5 : Settings
After connecting your new player for the first time 
and pressing [Í], a screen for the basic settings 
will appear.
Preparation
Turn on the television and select the 
appropriate video input on the television.
1Press [ Í].
Setup screen appears.
2Follow the on-screen instructions and 
apply the settings.
	≥ You can perform this setup anytime by selecting “Easy 
Setting” in the Setup menu. ( >24)
After completing “Easy Setting”, you can perform 
“Easy Network Setting”.
Select “Wired” and press [OK].
Follow the on-screen instructions to apply your 
connection settings.
Preparation
≥Obtain your network name ( >11, SSID).
≥ If your wireless connection is encrypted, 
please be sure that you know your 
encryption key (password).
≥If “Wireless LAN Adaptor is not connected.” is 
displayed, check that the Wireless LAN Adaptor is 
fully inserted. Alternatively, disconnect and reconnect 
it. If there is still no change in the display, consult 
your dealer for advice.
1Select “Wireless” and press [OK].
2Select “Search for wireless network” or 
“WPS (PUSH button method)” and press 
[OK], then follow the on-screen 
instructions and apply the settings.
∫ “WPS (PUSH button method)”
If you are using a wireless router that supports 
WPS (Wi-Fi Protected SetupTM), you can easily 
perform the settings.
Easy Setting
Easy Network Setting
Wired connection
Wireless connection
Easy Network Setting
Wired
Wireless
Select a connection mode. 
 Current setting     Wired
 
OKRETURN
Wireless Settings
Select a connection method.
Please refer to the operating instructions of your wireless 
access point about connection methods.
Search for wireless network
WPS (PUSH button method)