Panasonic Dmp Bdt321 Owners Manual

							Playback
21VQT3V22
Enjoying Network 
Ser vice
(NETFLIX, etc.)
You can access information services from the 
VIERA Connect Home screen via the Internet.
* Images are for illustration purposes, contents may change without notice.
Preparation
≥Network connection ( >12)
≥ Network setting ( >13)
To enjoy video communication (ex. Skype
TM)  :
≥ Connect this unit with optional Communication 
Camera (TY-CC20W or TY-CC10W).
Depending on your location, this optional 
camera may not be available. Please consult 
your local Panasonic dealer for advice.
≥ For operating method refer to the following 
website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
1Press [INTERNET].
≥The video communication service can be 
accessed directly by pressing [ ] button, 
and NETFLIX can be accessed directly by 
pressing [NETFLIX] button.
2Select the item.
To exit from VIERA Connect
Press [HOME].
	≥ When playing content in the media, VIERA Connect cannot 
be accessed by pressing [INTERNET].
≥ In the following cases, settings are possible using the 
Setup menu items.
– When restricting the use of VIERA Connect 
(> 31, “Network Service Lock”)
– When the audio is distorted (> 30, “Audio Auto Gain Control”)
– When wrong time is displayed (> 30, “Time Zone”, “DST”)
≥ If using slow Internet connection, the video may not be 
displayed correctly. A high-speed Internet service with a 
speed of at least 6 Mbps is recommended.
≥ Be sure to update the firmware when a firmware update 
notice is displayed on the screen. If the firmware is not 
updated, you will not be able to use the VIERA Connect 
function. ( >15)
≥ VIERA Connect Home screen is subject to change without 
notice.
≥ The services through VIERA Connect are operated by their 
respective service providers, and service may be 
discontinued either temporarily or permanently without 
notice. Therefore, Panasonic will make no warranty for the 
content or the continuity of the services.
≥ All features of websites or content of the service may not 
be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries 
and may be presented in specific languages.
*
MORE
BACK
XXXXXXFeatured VideosXXXXXXXXXXX
XXXXXXXX
XXXXXXXXNew York, NYMostly Cloudy39 
						

							22VQT3V22
Home Network feature
You can share photos, videos and music stored in 
the DLNA Certified media server (PC with 
Windows 7 installed, smartphone, etc.) connected 
to your home network, and enjoy the contents 
with this player.
Preparation
1 Perform network connection ( >12) and 
network settings ( >13) of this unit. 
2 Perform Home Network settings of the 
connected equipment.
3 Add the contents and folder to the libraries of 
the Windows Media
® Player or the 
smartphone, etc.
≥ Playlist of Windows Media
® Player can play 
back only the contents that are stored in the 
libraries.
1Press [HOME].
2Select “Network”.
3Select “Home Network”.
4Select “DLNA Client”.
≥ The list can be updated by pressing [R] on 
the remote control.
≥ The connection method can be switched to 
Wi-Fi Direct by pressing [G] on the remote 
control.
5Select the equipment.
6Select the item to play.
≥You may be able to use convenient 
functions depending on the content by 
pressing [OPTION].
≥ Control Panel 
(> 25) is displayed once the 
playback starts. Tap the touchpad if the 
Control Panel is not displayed, and press 
[RETURN] to hide the Control Panel.
To exit from Home Network
Press [HOME]. You can use the smartphone, etc. as the Digital 
Media Controller (DMC) to play back contents 
from DLNA server on the Renderer (this unit).
Possible applications:
* DMC compatible software should be installed.
Preparation
Perform steps 1
 to 3. (> left )
4Perform the “Remote Device Settings”. (>30)≥You can register up to 16 devices.
1Press [HOME].
2Select “Network”.
3Select “Home Network”.
4Select “Media Renderer”.
5Select “Home Network” or “Wi-Fi Direct”, 
then follow the indications on the screen.
6Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
	
≥ Wi-Fi Direct connection while using Home Network feature 
is only temporary, and the network connection method 
returns to the original setting when exiting.
≥ Depending on the contents and the connected equipment, 
playback may not be possible.
≥ Items displayed in gray on the display cannot be played 
back by this unit.
≥ This unit can be played back via connected equipment only 
when controlled using DMC.
Playing back contents on 
the DLNA server
Server
Player
Using the Digital Media 
Controller
For more details, refer to the following website 
and the operating instructions for each of the 
equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
*
*
*
Renderer
Renderer
Server
Server
+
Controller
Controller
DMP-BDT320_VQT3V22_eng.book  22 ページ  ２０１２年１月１１日　水曜日　午後８時４９分 
						

							Playback
23VQT3V22
VIERA LinkTM 
“HDAVI Control
TM” 
Preparation
1 Set “VIERA Link” to “On” ( >32). (The default 
setting is “On”.)
2 Set the “HDAVI Control” operations on the 
connected equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible 
equipment and select this unit’s input channel 
on the connected TV so that the “HDAVI 
Control” function works properly.
Also when the connection or settings are 
changed, repeat this procedure.
When the following operations are performed, the 
input channel of the television will be 
automatically switched and the screen of this unit 
will be displayed. 
When the television is off, the television will 
automatically turn on.
– When play starts on the unit
– When an action that uses the display screen is  performed
(e.g., Home menu) All connected equipment compatible with “HDAVI 
Control”, including this unit, automatically turns off 
when you switch the television off.
Playing music continuously even after turning 
off power to the television
When the unit is connected to a Panasonic TV 
(VIERA) that supports HDAVI Control 2 or later 
and an amplifier/receiver supports VIERA Link.
1
While playing music
Press [OPTION].
2 Select “TV Power”.
Only when TV supports “HDAVI Control 2” or 
later
By using the TV remote control, you can perform 
various playback operations and settings.
See the operating instructions of the TV for more 
details.
	≥ The buttons that you can use for this unit vary depending 
on the TV. For details, refer to the operating instructions of 
the TV.
≥ The operation of this unit may be interrupted when you 
press certain buttons on the TV remote control.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of 
November, 2011) for Panasonic’s HDAVI Control 
compatible equipment. This standard is compatible with 
Panasonic’s conventional HDAVI equipment.
≥ VIERA Link “HDAVI Control”, based on the control 
functions provided by HDMI which is an industry standard 
known as HDMI CEC (Consumer Electronics Control), is a 
unique function that we have developed and added. As 
such, its operation with other manufacturers’ equipment 
that supports HDMI CEC cannot be guaranteed.
≥ Please refer to individual manuals for other manufacturers’ 
equipment supporting VIERA Link function.
Automatic input switching
Power on link
What is VIERA Link “HDAVI Control”?
VIERA Link
TM is a new name for EZ 
SyncTM.
VIERA Link “HDAVI Control” is a 
convenient function which will link the 
operations of this unit and a Panasonic 
TV (VIERA) or amplifier/receiver under 
“HDAVI Control”.
You can use this function by connecting 
the equipment with an HDMI cable. See 
the operating instructions for connected 
equipment for operational details.
Power of f link
Easy control only with 
VIERA remote control
DMP-BDT320_VQT3V22_eng.book  23 ページ  ２０１２年１月１１日　水曜日　午後８時４９分 
						

							24VQT3V22
SettingsOption menu
A variety of playback operations and settings can 
be performed from this menu.
Available options differ depending on the playing 
contents and the condition of the unit.
About Multi User Mode
 : Settings of the items with this indication are 
saved by the respective users registered in the 
Home menu. 
Please refer to page 17 for details about user 
registration and switching.
1Press [OPTION].
≥ When playing music, select “Playback 
Settings”.
e.g., BD-Video
2Select an item and change the settings.
To exit the screen
Press [OPTION].
Regarding Language : ( >38) ∫
Soundtrack
Show or change the soundtrack.
∫ Audio channel
Select the audio channel number.
∫ Subtitle
Change the subtitle settings.
∫ Angle
Select the number of the angle.
∫ Repeat Play
(Only when the elapsed time is being displayed 
on the unit’s display.)
Select the item that you want to repeat. 
≥ The items displayed differ depending on the 
type of media.
≥ Select “Off” to cancel.
∫ Shuffle
Select whether or not to play random.
∫ Start Slideshow
Start the slideshow.
∫ Status
Show the status messages.
∫ Rotate Right
∫ Rotate Left
Rotate the still picture.
∫ Wallpaper
Set the still picture to the wallpaper of HOME 
menu.  (> 16)
∫Icon Personalization
Set the still picture as your user icon.  (> 17)
∫Video
The recording method of original video appears.
∫ Primary Video
The recording method of original primary video 
appears.
Operation Menu
Pop-up Menu
Top Menu Secondary Video
Control Panel Status Repeat Play
Angle
Subtitle Soundtrack
Off
Primary Video MPEG-4 AVC 1
1 ENG DTS-HD MSTR Multi
Operation Menu
DMP-BDT320_VQT3V22_eng.book  24 ページ  ２０１２年１月１１日　水曜日　午後８時４９分 
						

							Settings
25VQT3V22
∫Secondary Video
∫Control Panel
Display the Control Panel.
Playing back while using VIERA Link, etc.
Tap to select the center key.
Swipe your finger up, down, left or right to select 
the keys accordingly.
Press [RETURN] to hide the Control Panel.
∫ To p  M e n u
Display Top Menu.
∫ Pop-up Menu
Display Pop-up Menu.
∫ Menu
Display Menu.
You can access settings to enjoy special features 
of this unit from this category. 
Refer to “Video Settings” and “Audio Settings” 
(> 26) for more details on each setting item.
∫Picture Mode 
Select the picture quality mode during play.
≥ If you select “User”, you can change settings in 
“Picture Adjustment”. 
∫ Picture Adjustment 
Specific picture quality settings can be performed.
≥ 3D NR:
Reduces the rough noise in the background to 
give a greater feeling of depth.
When “24p Output” is set to “On”, this function 
may not operate. ( >27)
≥ Integrated NR:
Smoothes block noise and reduces the 
smudging that appears around contrasting 
sections of the picture.
∫ Chroma Process 
The high-resolution processing of HDMI chroma 
signals produces a high-resolution picture with 
rich picture quality.
∫ Detail Clarity 
The picture is sharp and detailed.
∫ Super Resolution 
Pictures of normal image quality are corrected to 
sharp and detailed images when output as 1080i/
1080p from HDMI AV OUT.
∫ Progressive
Select the method of conversion for progressive 
output to suit the type of material being played.
≥ When the content is distorted change the 
settings from “Auto” to “Video”.
∫ 24p
Movies and other material recorded on 
DVD-Video at 24p are output at 24p.
≥ Only when you have selected “On” in “24p 
Output” ( >27).
∫ Screen Aspect 
Switch the screen mode.
∫ Reset to Default Video Settings
Return video settings to the factory preset.
Video
Select on/off of images. The 
recording method of original 
video appears.
≥ During search/slow-motion or 
frame-by-frame, only the 
primary video is displayed.
SoundtrackSelect on/off of audio and the 
language.
Personal Preference
EXITe.g., 
Video Settings
DMP-BDT320_VQT3V22_eng.book  25 ページ  ２０１２年１月１１日　水曜日　午後８時４９分 
						

							26VQT3V22
∫Sound Effects*1, *2 
Select the sound effect.
≥Night Surround:
Enjoy a movie with powerful sound even when 
the volume is kept low at night. The audio is set 
in such a way that it can be heard easily.
≥ Re-master: 
This feature gives you brighter sound by 
increasing the high frequency portion of the 
audio. (Discs recorded at 48 kHz or less)
Recommended setting
≥ Digital Tube Sound:
This feature gives you a warm sound, like that 
produced by a vacuum tube amplifier.
Recommended setting
∫ Dialog Enhancer*2 
The volume of the center channel is raised to 
make dialog easier to hear.
∫High Clarity Sound 
When connected to TV via the HDMI terminal for 
outputting image, it pr oduces clearer sound.
≥ Only when you have selected “Enable” in “High 
Clarity Sound” ( >29).
∫ High Clarity Sound Plus
When playing back music contents, it improves 
the sound quality by stopping the video output.
≥ When “No HDMI Output” is selected, the sound 
is output only from the AUDIO OUT terminal 
and the OPTICAL terminal.
≥ Only when you have selected “Enable” in “High 
Clarity Sound” ( >29).
*1Not every function can be set individually.*2This function is effective for audio from the HDMI terminal 
or the OPTICAL terminal only when “Digital Audio Output” 
is set to “PCM” (> 28). (However, in this case, audio is 
output as 2ch from the OPTICAL terminal.)
∫ Signal Format
∫3D Picture Mode
∫Manual Settings 
∫Pop-Out Level 
(Only when “Full HD” is selected in “3D Type” 
(> 29).)
3D position for the Option menu or message 
screen, etc. can be adjusted during 3D playback.
Audio Settings
Re-master 1Pop and rock
Re-master 2Jazz
Re-master 3Classical
Digital Tube Sound 1A crisp, delicate sound
Digital Tube Sound 2A tight, hi-fi sound
Digital Tube Sound 3A soft, rich sound
Digital Tube Sound 4A clear, powerful sound
Digital Tube Sound 5A distinctive mid-range 
sound
Digital Tube Sound 6A soft, enveloping 
sound
3D Settings
OriginalKeep original picture format.
Side by side3D picture format comprising of 
left and right screens. 
2D to 3DConverts 2D pictures to 3D effect.
NormalPlay back pictures with normal 
3D effects.
SoftYou can enjoy 3D pictures with a 
feeling of broadness, holding 
back the depth perception.
ManualPlay back 3D pictures with 
settings of “Manual Settings”.
DistanceSet the amount of depth 
perception.
Screen TypeSelects how the screen appears 
during 3D playback (flat or 
round).
Frame WidthSet the amount of feathering at 
the edge of screen.
Frame ColorSet the color of feathering at the 
edge of screen.
DMP-BDT320_VQT3V22_eng.book  26 ページ  ２０１２年１月１１日　水曜日　午後８時４９分 
						

							Settings
27VQT3V22
Setup menu
Change the unit’s settings if necessary. The 
settings remain intact even if you switch the unit 
to standby.
Some items in the Setup menu are common to 
the Option menu. You can get the same effect 
with both menus.
About Multi User Mode : Settings of the items with this indication are 
saved by the respective users registered in the 
Home menu. 
Please refer to page 17 for details about user 
registration and switching.
1Press [HOME].
2Select “Setup”.
3Select “Player Settings”.
4Select an item and change the settings.
To exit the screen
Press [HOME].
∫ Picture Mode   ( >25)
∫ Picture Adjustment   ( >25)
∫Chroma Process   (> 25)
∫Detail Clarity   (> 25)
∫Super Resolution   (>25)
∫HDMI Output
Tap to show the following settings:
¾ HDMI Resolution
The items supported by the connected devices 
are indicated on the screen as “ ¢”. When any 
item without “ ¢” is selected, the images may be 
distorted.
≥ If “Auto” is selected, the best suited output 
resolution to the connected television is 
automatically selected.
≥ To enjoy high-definition video up-converted to 
1080p, you need to connect the unit directly 
to 1080p compatible HDTV (High Definition 
Television). If this unit is connected to an 
HDTV through other equipment, the other 
equipment must also be 1080p compatible.
¾24p Output
When this unit is connected to a TV supporting 
1080/24p output using an HDMI cable, movies 
and other material recorded at 24p are output at 
24p.
≥ When playing DVD-Video, set to “On” and 
then set “24p” in “Video Settings” ( >25) to 
“On”.
≥ When BD-Video images other than 24p are 
played, images are output at 60p.
≥ 24p : A progressive image recorded at a rate 
of 24 frames per second (motion-picture film). 
Many BD-Video movie contents are recorded 
in 24 frames/second in accordance with the 
film materials.
¾HDMI Color Mode
This setting is for selecting color-space 
conversion of the image signal when the unit is 
connected using an HDMI cable.
¾ Deep Color Output
This setting is for selecting whether to use Deep 
Color output when a television that supports 
Deep Color is connected.
¾ Contents Type Flag
Depending on the playback content, the TV will 
output adjusting to the optimal method when a 
TV that supports this function is connected.
Video
OKRETURN
Player Settings
System Ratings Network Language
3D Audio
VideoBlack Level Control Seamless Play
Still Mode (paused video)
HDMI Output Super Resolution
Detail Clarity
Chroma Process
Picture AdjustmentPicture Mode
LighterOn
Auto 1
0
Advanced Normal
DMP-BDT320_VQT3V22_eng.book  27 ページ  ２０１２年１月１１日　水曜日　午後８時４９分 
						

							28VQT3V22
∫Still Mode (paused video)
Select the type of picture shown when you pause 
playback.
∫ Seamless Play
The chapter segments in playlists are played 
seamlessly.
≥ Select “On”, when the picture freezes for a 
moment at the chapters segment in playlists.
∫ Black Level Control
(This works only for video output from the VIDEO 
OUT terminal.)
Select lighter or darker for adjusting the black level 
to the desired setting for picture enhancement.
∫ Sound Effects   ( >26)
∫ Dialog Enhancer   ( > 26)
∫ Dynamic Range Compression
You can listen at low volumes but still hear dialog 
clearly.
(Dolby Digital, Dolby Digital Plus and Dolby 
TrueHD only)
≥ “Auto” is effective only when playing Dolby 
TrueHD.
∫ Digital Audio Output
Tap to show the following settings:
¾ Dolby D/Dolby D +/Dolby TrueHD
¾ DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected 
equipment cannot decode the respective 
audio format. This unit decodes the audio 
format and transmits to the connected 
equipment.
≥ Not making the proper settings may result in 
noise.
¾BD-Video Secondary Audio
Select whether or not to mix the primary and 
secondary audio (including the button click 
sound).
If “Off” is selected, the unit outputs the primary 
audio only.
¾ HDMI Audio Output
This setting selects whether or not to output 
audio from HDMI.
≥ Select “Off” when the TV is connected to this 
unit via an HDMI terminal, and this unit is also 
connected to other devices, such as an 
amplifier/receiver via an OPTICAL terminal.
∫ PCM Down Conversion
Select how to output audio with a sampling 
frequency of 96 kHz for the PCM output from the 
DIGITAL AUDIO OUT.
≥ If “On” is selected, the signals that are 
converted to 48 kHz are output.
≥ If “Off” is select ed, and the connected 
equipment does not support 96 kHz, the sound 
will not be output normally.
≥ Signals are converted to 48 kHz despite the 
settings in the following cases:
– when the signals have a sampling frequency 
of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to “On”
∫ Downmix
Select the downmix system of multi-channel to 
2-channel sound.
≥Select “Surround encoded”, when the connected 
equipment supports the virtual surround function.
≥ There is no effect on “Bitstream” via HDMI AV 
OUT and DIGITAL AUDIO OUT.
≥ The audio will be output in “Stereo” in the 
following cases:
– AVCHD playback
– Playback of secondary audio (including the 
button click sound).
AutoAutomatically selects the type of 
picture shown.
FieldSelect if jittering occurs when “Auto” is 
selected.
FrameSelect if small text or fine patterns cannot 
be seen clearly when “Auto” is selected.
Audio
DMP-BDT320_VQT3V22_eng.book  28 ページ  ２０１２年１月１１日　水曜日　午後８時４９分 
						

							Settings
29VQT3V22
∫7.1ch Audio Reformatting
Surround sound with 6.1ch or less is automatically 
expanded and played back at 7.1ch.
≥If “Off” is selected, sound is played over the 
original number of channels. (Note that in the 
case of 6.1ch audio, playback will be at 5.1ch.)
≥ Audio reformatting is enabled in the following 
cases:
– When you have selected “PCM” in “Digital 
Audio Output”.
– When the audio is Dolby Digital, Dolby Digital  Plus, Dolby TrueHD or LPCM.
– BD-Video playback
∫ High Clarity Sound 
When connected to TV via the HDMI terminal for 
outputting image, it produces clearer sound.
≥ Select “Enable” to use “High Clarity Sound” or 
“High Clarity Sound Plus” in the Option menu. 
(> 26)
∫Audio Delay
Synchronization between picture and sound is 
corrected by adjusting the delay time of the audio 
output.
∫ 3D BD-Video Playback
Select the playback method of 3D compatible 
video software.
∫ 3D AVCHD Output
Select the output method of 3D AVCHD videos.
∫ 3D Type
Select the format of the connected TV.
≥ Change the settings for 3D on the TV also when 
“Checker board” or “Side by side” is selected.
∫ 3D Playback Precautions
Set to display or hide the 3D viewing warning 
screen when playing back the 3D compatible 
video software.
∫ Manual Settings  (> 26)
∫Pop-Out Level   (> 26)
∫Audio Language
Choose the language for audio.
≥ If “Original” is selected, the original language of 
each disc will be selected.
≥ Enter a code ( >38) when you select “Other 
¢¢¢¢ ”.
∫Subtitle Language
Choose the language for the subtitle.
≥ If “Auto” is selected and the language selected 
for “Audio Language” is not available, subtitles 
of that language will automatically appear if 
available on that disc.
≥ Enter a code ( >38) when you select “Other 
¢¢¢¢ ”.
∫Menu Language
Choose the language for the disc menus.
≥ Enter a code ( >38) when you select “Other 
¢¢¢¢ ”.
∫Subtitle Text
Select a suitable item according to the language 
used for DivX  [For_Canada]
 or MKV subtitles text.≥This item is displayed only after playing back a file.
∫On-screen Language
Choose the language for menus and on-screen 
messages.3D
Language
DMP-BDT320_VQT3V22_eng.book  29 ページ  ２０１２年１月１１日　水曜日　午後８時４９分 
						

							30VQT3V22
∫Easy Network Setting ( >13)
∫Network Settings
Perform network-related settings individually.
Tap to show the following settings:
¾ LAN Connection Mode
Select the LAN connection method.
≥ Select “Wireless Master” when you make a 
direct wireless connection between this unit 
and a Home Network device. Internet 
connection is not available when this item is 
selected.
¾Wireless Settings
This allows the wireless router and connection 
settings to be set. Current connection settings 
and connection state can be checked.
Connection Setting
The wireless router connection wizard will be 
displayed.
Double Speed Mode Setting (2.4GHz)
When a 2.4 GHz wireless format is used, this 
sets the connection speed.
≥ If you connect using the “Double Speed 
Mode (40MHz)”, 2 channels use the same 
frequency band, and there is consequently 
a greater risk of reception interference. This 
can cause the connecti on speed to drop or 
become unstable.
¾ IP Address/DNS Settings
This is for checking the state of the network 
connection and setting the IP address and 
DNS-related.
Tap to show the respective setting.
¾ Proxy Server Settings
This is for checking the state of connection with 
the Proxy server and performing settings.
Tap to show the respective setting.
¾ Network Service Settings ( >21) 
(VIERA Connect)
Tap to show the following settings:
Audio Auto Gain Control
Volume that is different depending on the 
contents is adjusted aut omatically to the 
standard volume while using the VIERA 
Connect.
≥ Depending on contents, this function effect 
will not work.
≥ Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set 
the unit’s time to match your location.
≥Some VIERA Connect contents require the 
time zone to be set. Set the time zone if 
necessary.
DST
Select “On” when using Daylight Saving time.
¾Network Drive Connection
It is possible to access the shared folder of 
equipment not compatible with DLNA, such as 
the Windows XP operating system, and play 
back video, still pictures, and music on this unit.
For the setting and operation method of 
connected equipment, refer to the following 
Website. 
http://panasonic.jp/support/global/cs/
(This site is in English only.)
¾ Remote Device Settings ( >22)
Tap to show the following settings:
Remote Device Operation
Enable to operate by DMC.
≥ If “On” is selected, “Quick Start” will be 
activated.
Setting Unit Name
Set the name of this unit to be displayed on 
the connected equipment.
≥With the default setting, the unit name will 
be displayed as “DMP-BDT320”.
Network
DMP-BDT320_VQT3V22_eng.book  30 ページ  ２０１２年１月１１日　水曜日　午後８時４９分