Panasonic Dmp Bd85 Operating Instruction

							21VQT2H76
Playback
Playing music
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
1Insert a disc or USB device.
If the menu is displayed, press [3,4 ] to select the item 
and press [OK].
2Press [ 3,4] to select the track and press 
[OK].
∫ Playing a track in another folder
1While the “Music list” is displayed
Press [SUB MENU].
2Press [ 3,4] to select “Select Folder” and 
press [OK].
	≥ You cannot select folders that contain no compatible tracks.
DVDCDUSB
 0.09  4.30
01
02
03
04
05Music listNo.
Track Name Play Time Track1
Track1 4min30sec 
3min41sec 
4min30sec 
3min11sec 
5min  2sec 
Track25 Tracks / Total Play Time 20min54sec
Track3
Track4
Track5
DIRECT NAVIGATORCD
PlayRETURN
“ ” indicates the track currently playing.
VQT2H76~Body_eng.fm  21 ページ  ２００９年１２月５日　土曜日　午後７時５５分 
						

							22VQT2H76
Linked operations with 
the TV 
(VIERA LinkTM “HDAVI ControlTM”)
Preparation
1Set “VIERA Link” to “On” ( >28). (The default setting is 
“On”.)
2 Set the “HDAVI Control” operations on the connected 
equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible equipment and 
select this unit’s input channel on the connected TV so 
that the “HDAVI Control” function works properly.
Also when the connection or settings are changed, 
repeat this procedure.
When the following operations are performed, the television 
will automatically switch the input channel and display the 
corresponding action. When the television is off, the television 
will automatically turn on.
– When play starts on the unit
– When an action that uses the display screen is performed (e.g., Direct Navigator screen)
All connected equipment compatible with “HDAVI Control”, 
including this unit, automatically turns off when you switch the 
television off.
Playing music continuously even after turning off power 
to the television
When the unit is connected to a Panasonic TV (VIERA) that 
supports HDAVI Control 2 or later and an amplifier/receiver 
supports VIERA Link. 
1 While playing music
Press [SUB MENU].
2 Press [ 3,4 ] to select “TV Power” and press [OK]. Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the 
“Control Panel” and display the Top Menu or Pop-up Menu, 
etc.
1Press [SUB MENU].
2Select an item, then 
press [OK].
≥
You cannot use the sub menu 
while the Top Menu for BD-Video or DVD-Video is 
displayed.
	≥ The buttons that you can use for this unit vary depending on the TV. For 
details, refer to the operating instructions of the TV.
≥ The operation of this unit may be interrupted when you press incompatible 
buttons on the TV remote control.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December, 2009) 
for Panasonic’s HDAVI Control compatible equipment. This standard is 
compatible with Panasonic’s conventional HDAVI equipment.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by 
HDMI which is an industry standard known as HDMI CEC (Consumer 
Electronics Control), is a unique function that we have developed and 
added. As such, its operation with other manufacturers’ equipment that 
supports HDMI CEC cannot be guaranteed.
≥ Please refer to individual manuals for other manufacturers’ equipment 
supporting VIERA Link function.
Automatic input switching
Power on link
Power off link
What is VIERA Link “HDAVI Control”?
VIERA Link
TM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient function 
that offers linked operations of this unit, and a 
Panasonic TV (VIERA) or amplifier/receiver under 
“HDAVI Control”. 
You can use this function by connecting the 
equipment with an HDMI cable. See the operating 
instructions for connected equipment for operational 
details.
Easy control only with VIERA 
remote control
Control Panel
Screen Aspect
Top Menu
Pop-up Menu
SUB
MENUOKRETURN
DMP-BD85VQT2H76_eng.book  22 ページ  ２００９年１１月３０日　月曜日　午後５時３２分 
						

							23VQT2H76
Playback
Enjoying VIERA CASTTM 
You can access a selection of Internet services from the 
Home screen with VIERA CAST, for example YouTube, 
Picasa Web Albums. (Current as of December 2009)
Preparation≥Network connection ( >10)
≥ Network setting ( >12)
1Press [VIERA CAST].
Message is displayed. Please read these instructions 
carefully and then press [OK].
2Press [ 3,4,2,1] to select the item and 
press [OK].
Operable buttons: 
[ 3 ,4, 2,1 ], [OK], [RETURN], colored buttons, 
numbered buttons
VIERA CAST Home screen;
To return to VIERA CAST Home screen
Press [VIERA CAST].
To exit from VIERA CAST
Press [EXIT], [FUNCTION MENU] or [TOP MENU/DIRECT 
NAVIGATOR].
	≥ In the following cases, settings are possible using “Internet Content 
Settings” (>29)
– When restricting the use of VIERA CAST.
– When the audio is distorted.
– When wrong time is displayed
≥ If using slow Internet connection, the video may not be displayed 
correctly. A high-speed Internet service with a speed of at least 6 Mbps is 
recommended.
≥ Be sure to update the firmware when a firmware update notice is 
displayed on the screen. If the firmware is not updated, you will not be 
able to use the VIERA CAST
TM function. (>14)
≥ VIERA CASTTM home screen is subject to change without notice.
≥ The services through VIERA CASTTM are operated by their respective 
service providers, and service may be discontinued either temporarily or 
permanently without notice. Therefore, Panasonic will make no warranty 
for the content or the continuity of the services.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be 
presented in specific languages.
Featured VideosFeatured Photos
Weather28ÃNew York, NY
W 17mphSettings
BloombergXXX
XXX
XXX7465.95
778.94
1442.82 -89.68
-9.47998 -25.15TELEVISION15min. delayTop Movie Rental
   XXXXXX
Top TV Show
   XXXXXX
COMING SOON
COMING
SOON
Images are for illustration purposes, contents may 
change without notice.
DMP-BD85VQT2H76_eng.book  23 ページ  ２００９年１２月３日　木曜日　午後４時５７分 
						

							24VQT2H76
Settin gs
Playback menu
1Press [DISPLAY].
2Press [3,4] to select the menu and press 
[ 1 ].
3Press [ 3,4 ,2, 1] to select the item and 
press [ 1].
4Press [ 3,4 ] to select the setting.
Some items can be changed by pressing [OK].
To exit the screen
Press [DISPLAY].
Depending on the condition of the unit (playing, stopped, 
etc.) and media contents, there may be some items that 
you cannot select or change.
Regarding Language, Audio attribute and video attribute : 
(> 38)
Signal Type
Video
The recording method of original video appears.
Soundtrack
Show or change the soundtrack.
Subtitle
Turn the subtitle on/off, and change the language depending 
on the media.
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
(>16, “Changing audio”)
Angle
Select the number of the angle.
Some items may be changed only on the disc specific menu. 
(> 16)
Video
Audio
Play
Disc
Subtitle StyleAngle
SubtitleOff Main1ENG
-
-
Signal Type
Menus Items Settings
e.g., BD-Video
Disc
Primary Video
VideoThe recording method of original video 
appears.
SoundtrackSelect the type of audio or language.
Secondary Video
VideoSelect on/off of images. The recording 
method of original video appears.
SoundtrackSelect on/off of audio and the language.
DMP-BD85VQT2H76_eng.book  24 ページ  ２００９年１２月５日　土曜日　午後６時２１分 
						

							25VQT2H76
Settings
Repeat Play
(Only when the elapsed time is being displayed on the unit’s 
display.)
Select the item which you want to repeat. The items displayed 
differ depending on the type of media.
Select “Off” to cancel.
Random
Select whether or not to play random.
Playback Information Window
Displays the following.
Press [RETURN] to exit.
Picture
Select the picture quality mode during play.
≥If you select “User”, you can make further adjustments. 
Press [ 1] to select “Picture Adjustment” and press [OK].
	≥3D NR:
Reduces the rough noise in the background to give a greater feeling of 
depth.
When “24p Output” is set to “On”, this function may not operate. (
>28)
≥ Integrated NR :
Smoothes block noise and reduces the smudging that appears around 
contrasting sections of the picture.
Advanced Settings
Progressive
Select the method of conversion for progressive output to suit 
the type of material being played.
≥ When the content is distorted change the settings from 
“Auto“ to “Video”.
24p
Movies and other material recorded on DVD-Video at 24p are 
output at 24p.
≥Only when you have selected “On” in “24p Output” ( >28)
Sound Effects*1
Select the sound effect.
≥Digital Tube Sound*2 :
This feature gives you warm sound, like that produced by a 
vacuum tube amplifier.
≥ Re-master
*2 : 
This feature gives you brighter  sound by increasing the high 
frequency portion of the audio. (Discs recorded at 48 kHz or 
less)
Recommended setting
≥ Night Surround :
Enjoy a movie with powerful sound even when the volume is 
kept low at night. The audio is set in such a way that it can 
be heard easily.
Dialog Enhancer*2
The volume of the center channel is raised to make dialog 
easier to hear.
High Clarity Sound
When connected to TV via HDMI terminal for outputting 
image, it produces clearer sound.
≥Only when you have selected “Enable” in “High Clarity 
Sound” ( >27).
*1Not every function can be set individually.*2This function is effective for audio from the HDMI terminal or the COAXIAL 
/OPTICAL terminal only when “Digital Audio Output” is set to “PCM” 
(
>27). (However, in this case, audio is output as 2ch from the COAXIAL 
/OPTICAL terminal.)
Play
Audio/video attribute information of disc.
Settings status of “Digital Audio Output” ( >27).
HDMI output information.
Video
Chroma ProcessThe high-resolution processing of HDMI chroma signals 
produces a high-resolution picture with rich picture quality
Detail ClarityThe picture is sharp and detailed.
*&/+
Audio
Re-master 1 Pop and rock
Re-master 2Jazz
Re-master 3Classical
VQT2H76~Body_eng.fm  25 ページ  ２００９年１２月４日　金曜日　午前１１時３３分 
						

							26VQT2H76
Setup menu
Change the unit’s settings if necessary. The settings remain 
intact even if you switch the unit to standby.
1Press [FUNCTION MENU] and press 
[3 ,4 ] to select “Other Functions” and 
press [OK].
2Press [ 3,4 ] to select “Setup” and press 
[OK].
3Press [ 3,4] to select the menu and press 
[OK].
4Press [ 3,4 ] to select the item and press 
[OK].
If there are any other items, repeat these steps.
5Press [ 3,4 ,2, 1] to select the option 
and press [OK].
≥ There may be differences in operation methods. If this happens, follow the 
on-screen instructions for the operation.
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥Follow the on-screen instructions. Enter a 4-digit password 
with the numbered buttons when the password screen is 
shown. 
BD-Video Ratings
Set an age limit of BD-Video play.
≥Follow the on-screen instructions. Enter a 4-digit password 
with the numbered buttons when the password screen is 
shown. 
Audio Language
Choose the language for audio.
≥If “Original” is selected, the original language of each disc 
will be selected.
≥ Enter a code ( >38) with the numbered buttons when you 
select “Other  ¢¢¢¢”.
Subtitle Language
Choose the language for subtitle.
≥If “Automatic” is selected and the language selected for 
“Audio Language” is not available, subtitles of that language 
will automatically appear if available on that disc.
≥ Enter a code ( >38) with the numbered buttons when you 
select “Other  ¢¢¢¢”.
Menu Language
Choose the language for disc menus.
≥Enter a code ( >38) with the numbered buttons when you 
select “Other  ¢¢¢¢”.
BD-Live Internet Access (>18)
You can restrict Internet access when BD-Live functions are 
used. 
≥If “Allow (Limited)” is selected, Internet access is permitted 
only for BD-Live contents which have content owner 
certificates.
DivX Subtitle Text
Select a suitable item according to the language used for DivX 
subtitles text ( >19). 
≥This item is displayed only after playing back a file.
About the password
The password of the following items are common.
Don’t forget your password.
≥“DVD-Video Ratings”
≥ “BD-Video Ratings”
≥ “Lock” ( >29)
OKRETURN
Setup
Disc
Video
Audio
Display
TV / Device Connection
Network
Others
Disc
DMP-BD85VQT2H76_eng.book  26 ページ  ２００９年１２月５日　土曜日　午後６時２１分 
						

							27VQT2H76
Settings
Still Mode (paused video)
Select the type of picture shown when you pause playback.
Seamless Play
The chapters segment in playlists are played seamlessly.
≥Select “On”, when the picture freezes for a moment at the 
chapters segment in playlists.
Black Level Control
Select lighter or darker for adjusting the black level control to 
the desired setting for picture enhancement.
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥“Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output (>33)
Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 
96 kHz for the PCM output from the DIGITAL AUDIO OUT.
≥If “ On ” is selected, the  signals that are converted to 48 kHz 
are output.
≥ If “Off” is selected, and the connected equipment does not 
support 96 kHz, the sound will not be output normally.
≥ Signals are converted to 48 kHz despite the settings across 
in the following cases:
– when the signals have a sampling frequency of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to “On”
Downmix
Select the downmix system of multi-channel to 2 channel 
sound.
≥Select “ Surround encoded ”, when  the connected equipment 
supports the virtual surround function.
≥ There is no effect on “Bitstream” via HDMI AV OUT and 
DIGITAL AUDIO OUT.
≥ The audio will be output in “Stereo” in the following cases.
– AVCHD playback
– Playback of secondary audio (including the button click 
sound).
7.1ch Audio ReformattingSurround sound with 6.1ch or less  is automatically expanded 
and played back at 7.1ch.
≥ If “Off” is selected, sound is  played over the original number 
of channels. (Note that in the case of 6.1ch audio, playback 
will be at 5.1ch.)
Audio reformatting is enabled in the following cases:
≥ When you have selected “PCM” in “Digital Audio Output”.
≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby 
TrueHD or LPCM.
High Clarity Sound
When connected to TV via HDMI terminal for outputting 
image, it produces clearer sound.
≥Set to “Enable” and then set “High Clarity Sound” on the 
playback menu to “On”. ( >25)
Audio Delay
Mis-sync between the video and audio is corrected by 
delaying the audio output.
Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for these menus and on-screen 
messages.
Screen Saver Function
This is to prevent  burn-in on the screen.
≥ When this is set to “On”:
If there is no operation for 10 minutes or more, Direct 
Navigator screen switches  to FUNCTIONS screen 
automatically.
≥ While playing and pausing, etc., this function is not 
available.
≥ As for Music [CD-DA] or MP3, regardless of the setting, if 
there is no operation for a while, Direct Navigator screen 
switches to the other states automatically.
FL Display
Changes the brightness of the unit’s display.
≥If “Auto” is selected the display is dimmed during playback 
and bright except during playback.
Video
AutoAutomatically selects the type of picture shown.
FieldSelect if jittering occurs when “Auto” is selected.
FrameSelect if small text or fine patterns cannot be seen 
clearly when “Auto” is selected.
Audio
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.≥Select “PCM ”, when the connected eq uipment cannot 
decode the respective au dio format.
≥ Not making the proper settings may result in noise.
BD-Video Secondary AudioSelect whether to mix or not mix the primary audio and
secondary audio (including the button click sound).  (> 18)
≥ If “ Off ” is selected, the  unit o utp uts the primary a udio only.
Display
DMP-BD85VQT2H76_eng.book  27 ページ  ２００９年１２月８日　火曜日　午後８時０分 
						

							28VQT2H76
SD Card LED Control
Set the lighting method for the lamp on the SD card slot.
≥If “SD inserted” is selected, and this unit is turned on and 
SD card is inserted, the lamp is lighted.
License
Information about the software used by this unit is displayed. 
TV Aspect
Set to match the type of television connected.
HDMI Connection
Press [OK] to show the following settings.Component Video Resolution
This sets the video output resolution when connected via the 
COMPONENT VIDEO OUT terminal.
≥
Even if you select “720p” or “1080i”, the video output 
resolution is restricted to “480p” when images of DVD-Video 
discs are output from the COMPONENT VIDEO OUT 
terminals.
Analog Audio Output
You can set the optimum multi-channel surround sound
for your speakers from this unit when the settings cannot be 
adjusted from a connected amplifier/receiver with AUDIO 
OUT terminals.
Select “2ch (Downmix) + 5.1ch” or “7.1ch” and press [OK], 
and then set the following options.
– Speaker presence and size ( )
– Delay time ( )
– Channel balance ( )
To finish the speaker setting
Press [ 3,4, 2,1 ] to select “Complete” and press [OK].
TV / Device Connection
When connected to a 4:3 aspect television and playing 16:9 
ratio image:
4:3 Pan & 
Scan
The sides are cut off so 
the picture fills the screen. 
When playing BD-Video, 
video is output as “4:3 
Letterbox”.
4:3 Letterbox
Black bands appear at the 
top and bottom of the 
picture.
When connected to a 16:9 widescreen television and 
playing 4:3 ratio image:
16:9Video is displayed as a 4:3 ratio image in the 
center of the screen.
16:9 FullVideo is displayed as a horizontally 
stretched 16:9 image.
HDMI Video Mode
Select “On” when video is output from HDMI AV OUT 
terminal.
OnImages are output from the HDMI terminal in the 
resolution set in “HDMI Resolution”.
OffImages are output in the resolution set in 
“Component Video Resolution”.
HDMI ResolutionThe items supported by the connected devices are 
indicated on the screen as “ ¢”. When any item without “ ¢” 
is selected, the images may be distorted.
≥ If “Auto” is selected, automatically selects the output 
resolution best suited to the connected television.
≥ To enjoy high definition video up-converted to 1080p, you 
need to connect the unit directly to 1080p compatible 
HDTV (High Definition Televisi on). If this unit is connected 
to an HDTV through other equipment, it must also be 
1080p compatible.
24p OutputWhen this unit is connected to a TV supporting 1080/24p 
output using an HDMI cable, movies and other material 
recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then also set 
“24p” in “Video” ( >25) to “On”.
≥ When BD-Video images other than 24p are played, 
images are output at 60p.
HDMI Color ModeThis setting is for selecting color-space conversion of the 
image signal when the unit is connected using an HDMI 
cable.
HDMI Audio OutputThis setting selects whether or not to output audio from 
HDMI.
≥Select “Off” when the TV is connected to this unit via an 
HDMI terminal, and this unit is also connected to other 
devices, such as an amplifier/receiver via a COAXIAL or 
an OPTICAL terminal.
VIERA LinkSet to use “HDAVI Control” function when connected with 
an HDMI cable to a device that supports “HDAVI Control”.
≥Select “Off” when you do not want to use “HDAVI Control”.
Deep Color OutputThis setting is for selecting whether to use Deep Color 
output when a television that supports Deep Color is 
connected.
Contents Type FlagDepending on the playback content, the TV will output 
adjusting to the optimal method when a TV that supports 
this function is connected.
LLSRSWRSLBRBC
ms0.0
dB0.0
DMP-BD85VQT2H76_eng.book  28 ページ  ２００９年１２月３日　木曜日　午後４時５７分 
						

							29VQT2H76
Settings
Network Easy Setting (>12)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings.
Off Timer
Select how long the unit remains on when it is not being used.
Remote Control Code
Change the remote control code, when other Panasonic 
products react to this remote control.
Quick Start
Speed of startup from power off is increased.
≥Internal control unit will be powered when it is set to “On”, so 
contents of the following will be different from the time it is 
set to “Off”.
– Idle power consumption will  increase. (about the power 
consumption  >37)
Easy Setting
You can execute basic sett ings (“On-screen Language”, “TV 
Aspect”, “Analog Audio Output”, “Quick Start”)
Restore Default Settings
This returns all values in the Setup menu and the  playback 
menu, except for “Remote Control Code”, “On-screen 
Language”, “IP Address/DNS Sett ings”, “Proxy Server 
Settings”, “Lock”, “DVD-Video Ratings” and “BD-Video 
Ratings” to the default settings.
DivX Registration (>19)
You need this registration code to purchase and play DivX 
Video-on-Demand (VOD) content.
System Information
Display firmware version of this unit, wireless LAN module of 
your Wireless LAN Adaptor.
Firmware Update (>14)
Press [OK] to show the following settings.
Network
LAN Connection ModeSelect connection method.
Access Point Connection SettingThis allows the Wireless router (Access point) and 
connection settings to be set and the current connection 
settings and connection state to be checked when a 
wireless connection is used.
Connection Setting
The Wireless router (Access point) connection wizard will 
be displayed.
IP Address/DNS SettingsThis is for checking the state of the network connection and 
setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting is enabled only when “Auto 
Detect Connection Speed” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy 
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings (>23) (VIERA CAST)
Press [OK] to show the following settings.
Lock
You can restrict the usage of VIERA CAST.
≥Follow the on-screen instructions. Enter a 4-digit 
password with the numbered buttons when the 
password screen is shown. 
Audio Auto Gain Control
Volume that is different depending on the contents is 
adjusted automatically to the standard volume while using 
the VIERA CAST.
≥ Depending on contents, this function effect will not 
work.
≥ Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s 
time to match your location.
≥ Some VIERA CAST contents require the time zone to 
be set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
Others
Automatic Update CheckWhen this equipment remains connected to the Internet, it 
will check for the latest firmware version when it is turned on 
and you can update it if necessary.
Update NowYou can update the firmware manually.
VQT2H76~Body_eng.fm  29 ページ  ２００９年１２月１１日　金曜日　午前１０時３５分 
						

							30VQT2H76
Reference
Troubleshooting guide
Before requesting service, please perform the 
following steps.
The following do not indicate a problem with this unit:
≥Regular disc rotating sounds.
≥ Image disturbance during search.
∫ Unit doesn’t respond to remote control 
or front panel buttons.
Press and hold [POWER  Í/I] on the main unit for 3 seconds.
– If still unable to power the unit off, disconnect the power  cord, wait 1 minute, then reconnect the power cord.
∫ Cannot eject disc.
The unit may have a problem.
1 While the unit is off, press and hold [OK], [B] and [Y] on 
the remote control at the same time for more than 
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote control or 
[POWER  Í/I] on the unit until “06 FTO” is displayed on 
the units display.
3 Press [OK] on the remote control or [ 29)
To return all settings to the factory preset.
¾Reset the unit as follows:
1 While the unit is off, press and hold [OK], [B] and [Y] on 
the remote control at the same time for more than 
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote control or 
[POWER  Í/I] on the unit until “08 FIN” is displayed on the 
units display.
3 Press and hold [OK] on the remote control or [ 29)
¾It may be necessary to set the manufacturer code or the 
remote control code again after changing the batteries for 
remote control. ( >14)
The TV tuner mode is not displayed when the 
TV is switched on.
¾This phenomenon may occur, depending on the TV 
setting, when “Quick Start” is set to “On”.
– Depending on the TV, this phenomenon may be prevented 
by reconnecting the HDMI cable to a different HDMI input 
terminal or by changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾The ratings level returns to the factory preset.
1 While the unit is on, press and hold [OK], [B] and [Y] on 
the remote control at the same time for more than 
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote control or 
[POWER  Í/I] on the unit until “03 VL” is displayed on the 
units display.
3 Press [OK] on the remote control or [  14)
4
Make the following checks and visit our 
website for more information.
For USA : 
http://www2.panasonic.com/consumer-electronics/support/
Enter the model number.
For Canada  : 
http://www.panasonic.ca 4
Even so, you still have trouble,
Visit our website to find a service center.You can find a service cent er near you easily on our 
website.
Other support information :
“Customer Services Directory (United States and Puerto 
Rico)” ( >40) or “Limited Warranty (Only for 
CANADA)” ( >41).
General operation
DMP-BD85VQT2H76_eng.book  30 ページ  ２００９年１２月３日　木曜日　午後４時５７分