Panasonic Dmp Bd70v Operating Instructions

RQT9412
11
Video Connections (TV)
For audio output, refer to pages 12 and 13.
AConnecting to your TV, via HDMI AV OUT≥“HDMI Video Mode” and “HDMI Audio 
Output” should be set to “On”. ( >34)
≥ The HDMI connection supports VIERA 
Link “HDAVI Control” ( >28) when used 
with a compatible Panasonic TV.
≥ This cable provides both Video and Audio 
connections. 
B Connecting to your TV, via COMPONENT VIDEO OUT≥Connect terminals of the same color.
≥ Set the “Black Level Control” to “Darker”. 
(> 32)
≥ Using the...

RQT9412
12
Connections
Digital Audio Connections
DConnecting to HDMI AV OUT terminal≥“HDMI Video Mode” and “HDMI Audio Output” 
should be set to “On”. ( >34)
≥ “Digital Audio Output” : Depending on the 
connected amplifier/receiver. ( >33)
≥ The HDMI connection supports VIERA Link 
“HDAVI Control” ( >28) when used with a 
compatible Panasonic TV.
≥ Enjoying High Bit rate Audio of BD-Video 
(> 8)
EConnecting to Digital Audio Output terminal≥Please set “Digital Audio Output” to the 
connection you will use...

RQT9412
13
Analog Audio Connection
AC power connection
F Connecting to AUDIO OUT terminal ≥Using the two analog audio channels this 
connection provides, you will not be able to 
use any surround sound audio modes.
VIDEO OUT
COMPONENT VIDEO OUTAUDIO OUTY L
RPB
PROPTICALDIGITAL AUDIO OUT (PCM/BITSTREAM )
AUDIO IN
R         LVIDEO IN
AUDIO OUT
Television
Audio/Video cable 
(included)
Back of the unit Amplifier/receiver
AUDIO IN OR
≥
For best results this unit should be connected 
directly to an AC outlet....

14
RQT9412
Remote control and unit reference guide
!Turn the unit on and off ( >15)
@ TV operation buttons ( >15)
You can operate the TV through the unit’s remote 
control.
[ Í TV POWER] : Turn the television on and off
[INPUT] : Input select
[ ij VOL] : Adjust the volume
[ WX CH] : Channel select
# Open or close the disc tray ( >19)
$ Select title numbers, etc./Enter numbers or 
characters ( >18, 20)
(The character buttons may be used when 
operating VIERA CAST contents. 
B 27)
[CANCEL] : Cancel/Reset...

RQT9412
15
Setting
Easy Setting
After connecting your new player and pressing the power button, a screen for the basic settings will appear.
Preparation
Turn on the television and select the appropriate video input on the television.
Reprogramming the remote control for TV control
You can operate the TV using the unit’s remote control.
Point the remote control at the television.
1Press [ ÍPOWER].
Setup screen appears.
≥If this unit is connected to a Panasonic TV (VIERA)  supporting HDAVI Control 2 or...

RQT9412
16
Broadband network connection
The following services can be used when this unit is connected to the 
Internet via a broadband connection.
≥ Firmware can be updated
 (B right)
≥ You can enjoy the BD-Live ( >23)
≥ You can enjoy the VIERA CAST ( >27)
≥ Use shielded LAN cables when c onnecting to peripheral devices.
≥ With installation where your broadband modem is connected 
directly to your PC, a router must be installed.
≥Use a router that supports 10BASE-T/100BASE-TX.
≥ In case all available...

RQT9412
17
Network settings
These settings are used if you will connect this unit to the Internet. 
≥
The connection to the Internet may take time or the Internet may not be 
connected depending on the connection environment. (
>35)
It is required that y ou use a broadband connection.
Preparation≥Connect to a broadband network. ( >16)
Testing of “IP Address/DNS Settings”
Always test the connection when a LAN cable is connected.
1 Press [SETUP].
2 Press [ 3,4] to select “Network” 
and press [OK].
3 Press...

18
RQT9412
Network settings
Setting the connection speed
When the connection test results in “Fail” after the IP and DNS-IP 
addresses are assigned, perform the following settings.
After performing steps 1–3 ( >17)
4 Press [ 3,4] to select “Auto Detect 
Connection Speed” and press 
[2, 1] to select “Off”.
5 Press [ 3,4] to select “Connection 
Speed Setting” and press [ 2,1] to 
select a connection speed.
≥ Select a connection speed in accordance with the environment of 
the network connected.
≥ When the...

RQT9412
19
Inserting or removing media
Inserting or removing a disc
1Press [ 

RQT9412
20
Play back
Basic play (Playing video contents)
Instructions for operations are generally described using the remote 
control in these operating instructions.
PreparationTurn on the television and select the appropriate video input on the 
television.
1Press [ÍPOWER] to turn on the unit.
2Insert the media (>19).
Play starts.
≥If play does not start, press [ 1](PLAY).
≥ If a media  with data in different file formats is 
inserted, the file selection  men u is displayed. 
Press  [3 ,4 ] to select...